WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
http://www.open-mpi.org/community/lists/devel/2014/05/14822.php
Revamp the ORTE global data structures to reduce memory footprint and add new features. Add ability to control/set cpu frequency, though this can only be done if the sys admin has setup the system to support it (or you run as root).
This commit was SVN r31916.
http://www.open-mpi.org/community/lists/devel/2014/04/14496.php
Revamp the opal database framework, including renaming it to "dstore" to reflect that it isn't a "database". Move the "db" framework to ORTE for now, soon to move to ORCM
This commit was SVN r31557.
Wire the security check into ORTE's OOB handshake, and add a "version" check to ensure that both ends are from the same ORTE version. If not, report the mismatch and refuse the connection
Fixes trac:4171
cmr=v1.7.5:reviewer=jsquyres:subject=Add a security framework for authenticating connections
This commit was SVN r30551.
The following Trac tickets were found above:
Ticket 4171 --> https://svn.open-mpi.org/trac/ompi/ticket/4171
Create a new required key in the OMPI layer for retrieving a "node id" from the database. ALL RTE'S MUST DEFINE THIS KEY. This allows us to compute locality in the MPI layer, which is necessary when we do things like intercomm_create.
cmr:v1.7.4:reviewer=rhc:subject=Cleanup handling of modex data
This commit was SVN r29274.
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***
Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.
***************************************************************************************
I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.
The code is in https://bitbucket.org/rhc/ompi-oob2
WHAT: Rewrite of ORTE OOB
WHY: Support asynchronous progress and a host of other features
WHEN: Wed, August 21
SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:
* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)
* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.
* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients
* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort
* only one transport (i.e., component) can be "active"
The revised OOB resolves these problems:
* async progress is used for all application processes, with the progress thread blocking in the event library
* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")
* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.
* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.
* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object
* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions
* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel
* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport
* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active
* all blocking send/recv APIs have been removed. Everything operates asynchronously.
KNOWN LIMITATIONS:
* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline
* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker
* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways
* obviously, not every error path has been tested nor necessarily covered
* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.
* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways
* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC
This commit was SVN r29058.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now.
This commit was SVN r27527.
The following SVN revision numbers were found above:
r27451 --> open-mpi/ompi@d59034e6ef
r27456 --> open-mpi/ompi@ecdbf34937
Update all the orte ess components to remove their associated APIs for retrieving proc data. Update the grpcomm API to reflect transfer of set/get modex info to the db framework.
Note that this doesn't recreate the old GPR. This is strictly a local db storage that may (at some point) obtain any missing data from the local daemon as part of an async methodology. The framework allows us to experiment with such methods without perturbing the default one.
This commit was SVN r26678.
Rename the memusage sensor plugin to "resusage" as it will soon be updated to include full process stat monitoring.
Extend the heartbeat sensor to report node and process stats in the heartbeat.
Store the process and node stats in their respective orte_xxx_t object.
This commit was SVN r24629.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
- This patch solely _adds_ required headers and is rather localized
The next patch (after RFC) heavily removes headers (based on script)
- ompi/communicator/communicator.h: For sources that use
ompi_mpi_comm_world, don't require them to include "mpi.h"
- ompi/debuggers/ompi_common_dll.c: mca_topo_base_comm_1_0_0_t needs
#include "ompi/mca/topo/topo.h"
- ompi/errhandler/errhandler_predefined.h:
ompi/communicator/communicator.h depends on this header file!
To prevent recursion just have fwd declarations.
#include "ompi/types.h" for fwd declarations of the main structs.
- ompi/mca/btl/btl.h: #include "opal/types.h" for ompi_ptr_t
- ompi/mca/mpool/base/mpool_base_tree.c: We use ompi_free_list_t and
ompi_rb_tree_t, so have the proper classes
- ompi/mca/op/op.h:
Op is pretty self-contained: Nobody up to now has done
#include "opal/class/opal_object.h"
- ompi/mca/osc/pt2pt/osc_pt2pt_replyreq.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/base/base.h:
We use opal_lists
- ompi/mca/pml/dr/pml_dr_vfrag.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/ob1/pml_ob1_hdr.h:
#include "ompi/mca/btl/btl.h" for mca_btl_base_segment_t
- opal/dss/dss_unpack.c:
#include "opal/types.h"
- opal/mca/base/base.h:
#include "opal/util/cmd_line.h" for opal_cmd_line_t
- orte/mca/oob/tcp/oob_tcp.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp.h:
#include "opal/threads/threads.h" for opal_thread_t
- orte/mca/oob/tcp/oob_tcp_msg.c:
#include "opal/types.h"
- orte/mca/oob/tcp/oob_tcp_peer.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp_send.c:
#include "opal/types.h"
- orte/mca/plm/base/plm_base_proxy.c:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
- orte/mca/rml/base/rml_base_receive.c:
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/mca/rml/oob/rml_oob_recv.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/mca/rml/oob/rml_oob_send.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/runtime/orte_data_server.c
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/runtime/orte_globals.h:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
Tested on Linux/x86-64
This commit was SVN r20817.
