map_to_processor_id,
map_to_socket_core,
max_processor_id,
max_socket,
max_core.
In OS other then Linux, those functions will return OPAL_ERR_NOT_SUPPORTED.
--This Line, and those below, will be ignored--
M paffinity/linux/paffinity_linux_module.c
M paffinity/paffinity.h
M paffinity/base/base.h
M paffinity/base/paffinity_base_wrappers.c
M paffinity/windows/paffinity_windows_module.c
M paffinity/solaris/paffinity_solaris_module.c
This commit was SVN r17173.
This patch fixes the segfault, so closing the ticket might be possible.
It's a very conservative patch. Perhaps the freeaddrinfo spec says that
it will never allocate res in case of errors, but for now, I neither
have the spec nor the will to rely on it.
This commit was SVN r17150.
"const" in the argument creates [correct] warnings (because __FILE__
is a (const char*)). Plus, opal_object.cls_init_file_name is already
(const char*).
This commit was SVN r17145.
ompi_pointer_array.c:ompi_pointer_array_set_item() was slightly
changed such that the "find the next open slot when the requested
index was already open" logic was no longer right -- since the new
lowest_free value is not set until ''after'' we look for the next open
slot, we need to start searching for the new lowest_free slot at the
(index+1) position (not the index position).
This commit was SVN r17021.
The following SVN revision numbers were found above:
r17007 --> open-mpi/ompi@906e8bf1d1
(sometimes after the merge with the ORTE branch), the opal_pointer_array
will became the only pointer_array implementation (the orte_pointer_array
will be removed).
This commit was SVN r17007.
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
* Conditionalize around `static inline` using
`OPAL_HAVE_INLINE_ATOMIC*` macros
* Remove redundant `opal_atomic*` prototypes (they
belong in the top-level `sys/atomic.h`
This commit was SVN r16957.
The following SVN revision numbers were found above:
r16807 --> open-mpi/ompi@b7c885247a
(e.g., gcc) are indifferent about this, while others are more
particular (e.g., Sun Studio 12).
* Typo: `asms.s` to `asm.s`
* Eliminate "foo is multiply-defined" linker errors on
Solaris by making the declarations in `opal/sys/atomic.h` agree
with their corresponding definitions (use `static inline` in *both*
places).
This commit was SVN r16807.
requesting it. This commit adds a bit of error checking to keep us from
participating in a checkpoint that we did not initiate and therefore are
not ready for.
Thanks to Paul Hargrove and Eric Roman for their help with this.
This commit was SVN r16694.
getting rid of compiler-warning when compiled with trunk of g++:
when doing --enable-debug:
../../../../orte/class/orte_pointer_array.h:128: warning: deprecated
conversion from string constant to 'char*'
This commit was SVN r16656.
methods (in order of precedence):
1. #pragma ident <ident string> (e.g., Intel and Sun)
1. #ident <ident string> (e.g., GCC)
1. static const char ident[] = <ident string> (all others)
By default, the ident string used is the standard Open MPI version string. Only
the following libraries will get the embedded version strings (e.g., DSOs will
not):
* libmpi.so
* libmpi_cxx.so
* libmpi_f77.so
* libopen-pal.so
* libopen-rte.so
* Added two new configure options:
* `--with-package-name="STRING"` (defaults to "Open MPI username@hostname
Distribution"). `STRING` is displayed by `ompi_info` next to the "Package"
heading.
* `--with-ident-string="STRING"` (defaults to the standard Open MPI version
string - e.g., X.Y.Zr######). `%VERSION%` will expand to the Open MPI
version string if it is supplied to this configure option.
This commit was SVN r16644.
* Fix some missing includes in a few places.
* Add the cr_request() functionality to the BLCR CRS component.
We are now dependent upon the 0.6.* series of BLCR.
* Made the CR notification mechanism a registered function.
This way we can have an OPAL-only version and it can be replaced at
runtime with the ORTE version.
* Add a 'opal_cr_allow_opal_only' parameter that will enable OPAL-only
CR functionality when the user wants it. Default: Disabled.
* Fix the placement of a checkpoint request check in MPI_Init
* Pull the OPAL notification mechanism into the SnapC framework.
* We no longer fork/exec the 'opal-checkpoint' command for local
checkpointing, the Local coordinator in the orted does this directly.
* The Local and Application coordinator talk together bypassing the OPAL
notifiation mechanism.
* Optimized the Local <-> App Coordinator communication.
* Improved the structure used to track vpid_snapshots in the local coord.
* Fix a race condition in which an application under heavy communication load
may produce an inconsistent global checkpoint.
This commit was SVN r16389.
The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component.
This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done:
As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in.
In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in.
The incoming changes revamp these procedures in three ways:
1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step.
The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic.
Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure.
2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed.
The size of this data has been reduced in three ways:
(a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes.
To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose.
(b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction.
(c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using.
While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly.
3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup.
It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging.
Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future.
There are a few minor additional changes in the commit that I'll just note in passing:
* propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details.
* requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details.
* cleanup of some stale header files
This commit was SVN r16364.
and implementation. This has shown drastic performance benefit when
transferring Many files at roughly the same time.
I tested this for many different filem operations and everything was working
fine. Let me know if you have any problems with this functionality.
Some Notes:
- opal-checkpoint now has a 'quiet' flag to keep it from being too verbose.
- FileM RSH component is fully non-blocking.
- FileM RSH component has incomming connection throttling since by default
ssh only allows 10 concurrent scp connections to any single host. This
default can be adjusted via an MCA parameter.
{{{-mca filem_rsh_max_incomming 10}}}
- There is an MCA parameter for max outgoing connections, but it is currently
not implemented. If someone needs it then it should not be hard to implement.
{{{-mca filem_rsh_max_outgoing 10}}}
- Changed the FileM request structure so that it is a bit more explicit and
flexible.
- Moved the 'preload-binary' and 'preload-files' functionality into odls/base
allowing for code reuse in the 'process' and 'default' ODLS components.
- Fixed a bug in the process name resolution which broke the 'preload-*'
functionality due to GPR table structure changes.
- The FileM RSH component might be able to see even more speedup from using a
thread pool to operate on the work_pool structures, but that is for future
work.
- Added a 'opal-show-help' file to ODLS Base
This commit was SVN r16252.
was taken form the $CWD to the storage directory. Now we just store directly
to the storage directory which can reduce NFS traffic if working in that mode.
A slight performance boost, but at the point you are using NFS you are paying
a penalty anyway. Now you just don't have to pay it twice :)
This commit was SVN r16099.
A subset of this patch needs to be applied to v1.2
Refs trac:928
This commit was SVN r15918.
The following Trac tickets were found above:
Ticket 928 --> https://svn.open-mpi.org/trac/ompi/ticket/928
was brought in. This supercedes the GLOBL patch that we had been using
with Libtool 2.1a versions prior to the lt_dladvise code. Autogen
tries to figure out which version you're on, so either will now work with
the trunk.
This commit was SVN r15903.
- If one wants to use this solution, remember to unload the project 'orte-restart' which is currently not working for Windows.
This commit was SVN r15680.
This is because internally 'self' uses dlopen to look at the application
running to determine if it can/should be used or not.
This commit was SVN r15673.
in a callback from the event library and post an RML receive, we'll
deadlock because the event library wouldn't be entered until the
event library was not already entered. Now just protect data structures
(which we were basically already doing) instead of code, like good
threading people ;).
This commit was SVN r15585.
* General TCP cleanup for OPAL / ORTE
* Simplifying the OOB by moving much of the logic into the RML
* Allowing the OOB RML component to do routing of messages
* Adding a component framework for handling routing tables
* Moving the xcast functionality from the OOB base to its own framework
Includes merge from tmp/bwb-oob-rml-merge revisions:
r15506, r15507, r15508, r15510, r15511, r15512, r15513
This commit was SVN r15528.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15506
r15507
r15508
r15510
r15511
r15512
r15513
asprintf and friends. This is not a failsafe; there are many cases
where this check will not be used. But at least it's something...
This commit was SVN r15500.
opal_net_get_hostname() rather than malloc, because no one was freeing
the buffer and the common use case was for printfs, where calling
free is a pain.
This commit was SVN r15494.
1. Galen's fine-grain control of queue pair resources in the openib
BTL.
1. Pasha's new implementation of asychronous HCA event handling.
Pasha's new implementation doesn't take much explanation, but the new
"multifrag" stuff does.
Note that "svn merge" was not used to bring this new code from the
/tmp/ib_multifrag branch -- something Bad happened in the periodic
trunk pulls on that branch making an actual merge back to the trunk
effectively impossible (i.e., lots and lots of arbitrary conflicts and
artifical changes). :-(
== Fine-grain control of queue pair resources ==
Galen's fine-grain control of queue pair resources to the OpenIB BTL
(thanks to Gleb for fixing broken code and providing additional
functionality, Pasha for finding broken code, and Jeff for doing all
the svn work and regression testing).
Prior to this commit, the OpenIB BTL created two queue pairs: one for
eager size fragments and one for max send size fragments. When the
use of the shared receive queue (SRQ) was specified (via "-mca
btl_openib_use_srq 1"), these QPs would use a shared receive queue for
receive buffers instead of the default per-peer (PP) receive queues
and buffers. One consequence of this design is that receive buffer
utilization (the size of the data received as a percentage of the
receive buffer used for the data) was quite poor for a number of
applications.
The new design allows multiple QPs to be specified at runtime. Each
QP can be setup to use PP or SRQ receive buffers as well as giving
fine-grained control over receive buffer size, number of receive
buffers to post, when to replenish the receive queue (low water mark)
and for SRQ QPs, the number of outstanding sends can also be
specified. The following is an example of the syntax to describe QPs
to the OpenIB BTL using the new MCA parameter btl_openib_receive_queues:
{{{
-mca btl_openib_receive_queues \
"P,128,16,4;S,1024,256,128,32;S,4096,256,128,32;S,65536,256,128,32"
}}}
Each QP description is delimited by ";" (semicolon) with individual
fields of the QP description delimited by "," (comma). The above
example therefore describes 4 QPs.
The first QP is:
P,128,16,4
Meaning: per-peer receive buffer QPs are indicated by a starting field
of "P"; the first QP (shown above) is therefore a per-peer based QP.
The second field indicates the size of the receive buffer in bytes
(128 bytes). The third field indicates the number of receive buffers
to allocate to the QP (16). The fourth field indicates the low
watermark for receive buffers at which time the BTL will repost
receive buffers to the QP (4).
The second QP is:
S,1024,256,128,32
Shared receive queue based QPs are indicated by a starting field of
"S"; the second QP (shown above) is therefore a shared receive queue
based QP. The second, third and fourth fields are the same as in the
per-peer based QP. The fifth field is the number of outstanding sends
that are allowed at a given time on the QP (32). This provides a
"good enough" mechanism of flow control for some regular communication
patterns.
QPs MUST be specified in ascending receive buffer size order. This
requirement may be removed prior to 1.3 release.
This commit was SVN r15474.
Remove the matching logic out of dynamic path into an
extra function. Add the corresponing check to the static
component path.
This commit was SVN r15458.
There are several interesting things:
1. less NFS traffic [as we potentially access less files]
2. faster loading time [in case the user tune it's execution environment]
3. (1) + (2) -> faster startup time [at least everything which do not depend on the network]
4. MX bug will go away if the pml is specified.
5. No useless BTL will be opened, which will solve few others issues.
This commit was SVN r15402.
VxWorks. Still some issues remaining, I'm sure.
Refs trac:1010
This commit was SVN r15320.
The following Trac tickets were found above:
Ticket 1010 --> https://svn.open-mpi.org/trac/ompi/ticket/1010
* Make orted.1 man page be non-descriptive because it's really an
internal command.
* Re-work the opal_wrapper man page logic a bit so that we can have a
real opal_wrapper.1 installed that says "don't look here -- look at
mpicc (etc.)"
This commit was SVN r15264.
* Remove the 'opal_mca_base_param_use_amca_sets' global variable
* Harness the fact that you can (read should) call the cmd_line functions
before initializing opal_init_util(). This pushes the MCA/GMCA/AMCA
command line options into the environment before OPAL inits and starts
to use these values. By putting the cmd_line parse before opal_init_util
in orterun and orted we only parse the *MCA parameter files once, and
correctly (alleviating the need to 'recache' the files on init.)
* Small bits of cleanup.
This commit was SVN r15219.
param says we should Also, check for != 0, rather than == 1, as there
are way too many double locks, but they'll get warned when we do the
double lock. No need to warn again, in a meaningless way.
Originally part of r15167, reverted with r15172.
This commit was SVN r15173.
The following SVN revision numbers were found above:
r15167 --> open-mpi/ompi@faa401dc47
r15172 --> open-mpi/ompi@5f16251808
OBJ_NEW
* Need to single when the passive unlock has left an expose epoch for
the win_free case
* Clean up some debugging output
* fix missing variable initialization
This commit was SVN r15167.
flex (which, incidentally, emit ''more'' warnings than earlier
versions). Grumble.
This commit was SVN r15166.
The following SVN revision numbers were found above:
r15158 --> open-mpi/ompi@57d09c10f7
Ensure that the AM_CONDITIONALs are ''always'' run, even if we
--enable-mca-no-build the paffinity/linux component.
This commit was SVN r15095.
The following Trac tickets were found above:
Ticket 1057 --> https://svn.open-mpi.org/trac/ompi/ticket/1057
single threaded builds. In its default configuration, all this does
is ensure that there's at least a good chance of threads building
based on non-threaded development (since the variable names will be
checked). There is also code to make sure that a "mutex" is never
"double locked" when using the conditional macro mutex operations.
This is off by default because there are a number of places in both
ORTE and OMPI where this alarm spews mega bytes of errors on a
simple test. So we have some work to do on our path towards
thread support.
Also removed the macro versions of the non-conditional thread locks,
as the only places they were used, the author of the code intended
to use the conditional thread locks. So now you have upper-case
macros for conditional thread locks and lowercase functions for
non-conditional locks. Simple, right? :).
This commit was SVN r15011.
re-enabling compilation of this component.
However, it still won't compile because this component provides a
module finalize function which apparently somehow got dropped from the
paffinity base. Support for the paffinity module finalize function
needs to be re-added.
This commit was SVN r14915.
* Enable VPATH builds to work (slight tweak of r14895 -- mainly
because I already had it done when George committed :-) )
* Enable "make dist" to work properly for PLPA included mode
* Update plpa.h.in
* Update svn:ignore
Took relevant changes back to the main PLPA SVN as well.
This commit was SVN r14896.
The following SVN revision numbers were found above:
r14895 --> open-mpi/ompi@bb7b04e875
Changes paffinity interface to use a cpu mask for available/preferred cpus
rather than the current coarse grained paffinity that lets the OS choose
which processor.
Macros for setting and clearing masks are provided.
Solaris and windows changes have not been made. Solaris subdirectory has some
suggested changes - however the relevant man pages for the Solaris 10 APIs
have some ambiguity regarding order in which one create and sets a processor
set. As we did not have access to a solaris 10 machine we could not test to
see the correct way to do the work under solaris.
This commit was SVN r14887.
symbols in them and environ is defined only in the final application
(probably in crt1.o). Apple provides a function for getting at the
environment, so use that instead if it's available.
This commit was SVN r14857.
OPAL and ORTE. Since we now do opal_progress_init(), we do it
there. Fixes a performance issue introduced in r14773.
* While trying to find the above, notived that we did the reference
counting for the init in init_util and for finalize in fini. That
isn't right, so make them both in the non-util versions.
This commit was SVN r14830.
The following SVN revision numbers were found above:
r14773 --> open-mpi/ompi@1e678c3f55
This commit moves the initalization/finalization of opal_event and opal_progress
to opal_init/finalize. These were previously init/final in ORTE which is an
abstraction violation. After talking about it we concluded that there are no
ordering issues that require these to be init/final in ORTE instead of OPAL.
I ran the IBM test suite against this commit and it didn't turn up any new
failures so I think it is good to go.
Let us know if this causes problems.
This commit was SVN r14773.
* Move ipv6comat.h code into opal_config_bottom.h and change into some
more intelligent testing of structures
* Change opal's if interface to use sockaddr instead of sockaddr_storage,
as the RFCs suggest we do
* Move the networking code in opal that isn't directly related to if
detection into net.h
* Add quicky function to get the port out of either a sockaddr_in
or sockaddr_in6, saving a bunch of code in the oob.
* Update TCP oob and btl with new interface
This commit was SVN r14679.
* Require Autoconf 2.60 or higher and remove some cruft
required for AC 2.59 or the AC 2.59 / AC 2.60 mix
* Remove a bunch of now unnecessary AC_SUBST calls
* Use the libtool-provided variables for the -I and
library to use when compiling against ltdl
Fixes trac:1000
This commit was SVN r14652.
The following Trac tickets were found above:
Ticket 1000 --> https://svn.open-mpi.org/trac/ompi/ticket/1000
via the visibility feature that is provided by some compilers.
Per default this feature is disabled, to enable it you need to
configure with --enable-visibility and obviously you need a compiler
with visibility support. Please refer to the wiki for more information.
https://svn.open-mpi.org/trac/ompi/wiki/Visibility
This commit was SVN r14582.
because the Sun Studio compiler did not recognize __const.
This commit fixes trac:1011.
This commit was SVN r14558.
The following Trac tickets were found above:
Ticket 1011 --> https://svn.open-mpi.org/trac/ompi/ticket/1011
- make opal_sockaddr2str() take a sockaddr_storage instead of a sockaddr_in6
so that it works for IPv4 and IPv6 addresses, and remove a whole bunch
of #ifs in the OOOB code.
- Fix a compiler warning in the TCP BTL due to run-time determined
array size by making it a dynamicly allocated array.
- Fix the unpacking code of IPv4 addresses when using IPv6 support, so
that the address is in the correct location (instead of in an IPv6
structure, use an IPv4 structure). Refs trac:1005.
This commit was SVN r14514.
The following Trac tickets were found above:
Ticket 1005 --> https://svn.open-mpi.org/trac/ompi/ticket/1005
This bug(?) become apparent due to the installdirs commit since these tools
were not finding the proper libraries since the paths were wonkey.
It all looks good now. :)
This commit was SVN r14461.
Protect the free and strdup values for replacing keyval pairs just as we do
below in the files for new keyval pairs.
In basic testing this seems to make everything work as it should again.
This commit was SVN r14460.
The following Trac tickets were found above:
Ticket 1002 --> https://svn.open-mpi.org/trac/ompi/ticket/1002
finally brings in functionality that is already on the 1.2 branch, and
was developed and tested in the v1.2ofed branch (and other places).
Short version of new features:
* Support for ibv_fork_init()
* Automatically fill in the openib BTL bandwidth value by
querying the HCA port
* Installdirs functionality
* Fixes to always use -I in the Fortran wrapper compilers (#924)
* Gleb's mpool updates
* Remove some kruft in btl/openib/configure.m4, therefore
fixing the harmless warnings noted in #665
* Bunches of updates to the Linux RPM spec file
I.e., effectively the same thing that r14411 brought to the v1.2
branch.
Also effectively brought in r14432 and r14433 (some fixes on top of
the original r14411 commit to v1.2). Still need to bring in the moral
equivalent of r14445 after this commit (fixes to installdirs).
This commit was SVN r14449.
The following SVN revision numbers were found above:
r14411 --> open-mpi/ompi@83b31314ae
r14432 --> open-mpi/ompi@a48f160595
r14433 --> open-mpi/ompi@68f346d2bc
r14445 --> open-mpi/ompi@13d366b827
that makes sense or not, it is allowed and it is done). Remove the compiler
hint that the argument will never be NULL. Fixes a segfault in oob init
code when opal_argv_split() was called with a NULL first argument.
This commit was SVN r14440.
VXWorks, for example). Checked with George before committing this to
ensure that nothing broke on Windows -- he said it was ok.
This commit was SVN r14388.
Fix for memory corruption in the restarted process stack. This stemed from
the brute force method we were previously using. This commit fixes this by
using a lighter weight solution focused in the r2 BML instead of above the PML.
This is a more efficient and flexible solution, and it solves the original
problem.
In the process I pulled out the ft_event function in the tcp BTL and r2 BML
into a set of *_ft.[c|h] files just to keep any updates to these code paths
as isolated as possible to make merging easier on everyone.
This commit was SVN r14371.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
The following Trac tickets were found above:
Ticket 977 --> https://svn.open-mpi.org/trac/ompi/ticket/977
supported, but "q" was for long long. This isn't ANSI
C and causes a warning when using PRI?64 macros. We
don't support versions prior to OS X 10.3, so we dont'
need such backward compatibility. Instead, redefine
the macros to be "ll", which is ANSI C and doesn't
cause a compiler warning.
Fixes trac:868
This commit was SVN r14358.
The following Trac tickets were found above:
Ticket 868 --> https://svn.open-mpi.org/trac/ompi/ticket/868
