Do not pass param file MCA params if the user has requested that no param files be read - required when trying to avoid launch time penalties from large numbers of processes reading default param files. The daemon picks them up and passes them along anyway, so it isn't clear what value we gain from having them all read the defaults
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
This PR renames the common library for OFI libfabric from
libfabric to ofi. There are a number of reasons this
is good to do:
1) its shorter and replaces 9 characters with three for
function names for what may eventually be a fairly extensive interface
2) OFI is the term used for MTL and RML components that use
the OFI libfabric interface
3) A planned OSC component will also use the OFI term.
4) Other HPC libraries that can use OFI libfabric tend to use
the term "ofi" internally and also in their configure options
relevant to OFI libfabric (i.e. MPICH/CH4, Intel MPI, Sandia SHMEM)
There seem to be comments in places in the Open MPI source
code that indicate that this common library will be going away.
Far from it as we will want to be able to share things like
AV objects between OMPI and possibly OSHMEM components that
use the OFI libfabric interface.
This PR also adds a synonym to the --with-libfabric(-libdir)
configury options: --with-ofi and with-ofi-libdir.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
This commit recategorizes several mpirun arguments,
and moves the information for mpirun --help arguments
to the bottom of the general help message. I also
added the OPAL_CMD_LINE_OTYPE field to two commands
that were missed initially because they were not
in the same area as the others.
Signed-off-by: Nathaniel Graham <ngraham@lanl.gov>
This commit modifies the output from the mpirun --help
command. The options have been split into groups, to
make the output smaller and more readable. The groups
are: general, debug, output, input, mapping, ranking,
binding, devel, compatibility, launch, dvm, and
unsupported. There is also a special "full" command
that can be used to get the old behaviour of printing
out all of the options. Unsupported options may only
be seen with this full output.
This commit also adds a special case for the help
argument. It makes it possible for the user to
enter 0 or 1 arguments instead of having to always
enter an argument. This defaults to printing out
the "general" help options so the user can then
see what help arguments there are.
Signed-off-by: Nathaniel Graham <ngraham@lanl.gov>
Set the daemons' state to "running" and mark them as "alive" by default when constructing the nidmap
Get the DVM running again
Fix direct modex by eliminating race condition caused by releasing data while sending it
Up the size limit before compressing
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Remove loadleveler as it is obsolescent and is no longer supported.
Fixes#3167
We'll wait for final check of whether or not loadleveler even
compiles/functions before merging this.
Signed-off-by: Howard Pritchard <howardp@lanl.gov>
onto the backend daemons. By default, let mpirun only pack the app_context
info and send that to the backend daemons where the mapping will
be done. This significantly reduces the computational time on mpirun as it isn't
running up/down the topology tree computing thousands of binding
locations, and it reduces the launch message to a very small number of
bytes.
When running -novm, fall back to the old way of doing things
where mpirun computes the entire map and binding, and then sends
the full info to the backend daemon.
Add a new cmd line option/mca param --fwd-mpirun-port that allows
mpirun to dynamically select a port, but then passes that back to
all the other daemons so they will use that port as a static port
for their own wireup. In this mode, we no longer "phone home" directly
to mpirun, but instead use the static port to wireup at daemon
start. We then use the routing tree to rollup the initial
launch report, and limit the number of open sockets on mpirun's node.
Update ras simulator to track the new nidmap code
Cleanup some bugs in the nidmap regex code, and enhance the error message for not enough slots to include the host on which the problem is found.
Update gadget platform file
Initialize the range count when starting a new range
Fix the no-np case in managed allocation
Ensure DVM node usage gets cleaned up after each job
Update scaling.pl script to use --fwd-mpirun-port. Pre-connect the daemon to its parent during launch while we are otherwise waiting for the daemon's children to send their "phone home" rollup messages
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Per a prior commit, the presence of "hwloc.h" can cause ambiguity when
using --with-hwloc=external (i.e., whether to include
opal/mca/hwloc/hwloc.h or whether to include the system-installed
hwloc.h).
This commit:
1. Renames opal/mca/hwloc/hwloc.h to hwloc-internal.h.
2. Adds opal/mca/hwloc/autogen.options to tell autogen.pl to expect to
find hwloc-internal.h (instead of hwloc.h) in opal/mca/hwloc.
3. s@opal/mca/hwloc/hwloc.h@opal/mca/hwloc/hwloc-internal.h@g in the
rest of the code base.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Add ability to pass DVM URI purely via environment
to simplify invocation from command-line (e.g., start dvm,
export URI, mpirun w/o needing to add `--hnp` arg).
If user passes both envvar *and* cmdline, the cmdline wins.
Signed-off-by: Thomas Naughton <naughtont@ornl.gov>
Ensure that job errors do not cause the DVM to fail unless the failed job is the DVM itself.
Refs #2987, with improvements from Ralph
Signed-off-by: Thomas Naughton <naughtont@ornl.gov>
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Need to check the entire value instead of just the last N digits. Otherwise, "-host 15" will match nid0015, nid0115, and any other launch id ending in 15
It appears strtol can return either a NULL or a zero-length string, so check for both cases
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Allow someone to specify the "pe=N" modifier to a mapping policy when N=1. This equates to just "bind-to core", but helps people who use a script to set the PE policy. Fix a bug where setting the binding policy left a lingering "if-supported" flag that shouldn't be there.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Set the orte_bound_at_launch MCA variable. This resolves a launch
performance bug when using aprun to launch Open MPI processes. If
this variable is not set it can take minutes longer to launch with
high ppn.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* Similar to the other launchers (i.e., slurm, alps) we need to put the
children in a separate process group to prevent SIGINT (from a CTRL-C)
from being delivered to the whole process group and prematurely
killing the rsh/ssh connections to the remote daemons.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
Fix the check for rsh/ssh so we allow the check for SGE and LoadLeveler to occur if user doesn't specify their own launch agent. Fix a Coverity warning
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
This commit fixes an error in teardown where the event bases are town
down before the peer structures are released. This causes us to call
event_del on an invalid event base. At best this makes valgrind
complain and at worst this causes aborts or segvs.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
direct. Don't resend wireup info if nothing has changed
Fix release of buffer
Correct the unpacking order
Fix the DVM - now minimized data transfer to it
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Fix static port wireup by recording the TCP port mpirun is using and correctly passing the regex of hosts to the daemons. Do a better job of closing sockets on failed connection attempts. Correctly identify the remote host in the associated error message.
Fix partial allocation operations by not attempting to set #slots on nodes that were not used, and thus don't have a daemon or topology assigned to them
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Repair rsh/ssh tree spawn by unpacking and updating the nidmap in remote_spawn.
Add more specific error messages so the cause of a messaging problem is a little clearer. Remove some stale code. Ensure we stop trying to send a message after a few times.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Given that we only set OOB contact info from inside of events, or before we begin threaded operations (e.g., in the ess), allow set_contact_info to directly update the oob/base framework globals.
Correct the nidmap regex decompression routine.
Ensure that rank=1 daemon always sends back its topology as this is the most common use-case.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Since the oob and connections systems do not work the same way they
did in older versions of Open MPI these operations are no longer
necessary. At best they do nothing and at worst they hurt performance
by making us enter the event library more often in opal_progress().
Fixes#2839
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* Add an MCA parameter to combine stdout and stderr at the source
- `iof_base_redirect_app_stderr_to_stdout`
* Aids in user debugging when using libraries that mix stderr with stdout
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
* Similar to `orte_map_stddiag_to_stderr` except it redirects `stddiag`
to `stdout` instead of `stderr`.
* Add protection so that the user canot supply both:
- `orte_map_stddiag_to_stderr`
- `orte_map_stddiag_to_stdout`
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
Note: since the discovered cpus are filtered against this list, #slots will be set to the #cpus in the list if no slot values are given in a -host or -hostname specification.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
This commit fixes a bug in the registration of the num_threads MCA
variable. The variable is of type int and was being registered as
a boolean.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Cleanup a typo, and remove no longer needed MCA params for hetero nodes and hetero apps. Hetero nodes will always be automatically detected. We don't support a mix of 32 and 64 bit apps
Modify the orte_node_t to use orte_topology_t instead of hwloc_topology_t, updating all the places that use it. Ensure that we properly update topology when we see a different one on a compute node.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
* ess/hnp: add support for forwarding additional signals
This commit adds support to the hnp ess module to forward additional
signals beyond the default SIGUSR1, SIGUSR2, SIGSTP, and SIGCONT.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* Generalize this a bit to allow a broader range of signals to be forwarded. Turns out that SIGURG is now a "standard" signal, though the value differs across systems. So setup to forward it (and some friends) if they are defined. Allow users to provide the signal name (instead of the integer value) as the value of even the more common signals does vary across systems. Don't limit the number that can be supported.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
* ess/hnp: fix some bugs in the signal forwarding code
This commit fixes two bugs:
- signals_set needs to be set even if no signals are being
forwarded. If it is not set we will SEGV in libevent if
ess_hnp_forward_signals == none.
- SIGTERM and SIGHUP are handled with a different type of handler. Do
not allow the user to specify these to be forwarded.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* We are sure to get "dinged" if error messages aren't nicely output via show_help, so do so here
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
state machine tells it to do so. This plugs leaked file descriptors as
we were losing track prior to destructing the resources.
Fixes#2691
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
This commit fixes rare race condition that occurs when the process
that is calling `exit(-1)` has delay between fd cleanup and actual
OS-level exit. This may happen if the process has some work to do
`on_exit()`.
**Problem description**:
Consider an application process that has called `exit(nonzero)`, it's
fd's was closed
but it's actual termination at OS level is delayed by some cleanups (eg.
in callbacks registered via `on_exit()`).
Observed sequence of events was the following:
* orted gets stdio disconnection and activating `IOF COMPLETE` state.
* parallel OOB disconnection causes `COMMUNICATION FAILURE` state to be
activated.
* during `COMMUNICATION FAILURE` processing `odls_base_default_wait_local_proc`
is called even though real waitpid wasn't yet called (code mentions that
waitpid might not be called for unspecified reason). Because of that real exit
code is unknown and set to 0. `odls_base_default_wait_local_proc` callback sees
`IOF COMPLETE` flag and in conjunction with 0-exit-code it activates
`WAITPID FIRED` state.
* processing of `WAITPID FIRED` leads to `NORMALLY TERMINATED` to be
activated.
* `NORMALLY TERMINATED` state in particular leads `ORTE_PROC_FLAG_ALIVE` flag
for this proc to be dropped.
* when application process finally exits and `wait_signal_callback` is
launched. It sets real exit code and calls `odls_base_default_wait_local_proc`
again but at this time since the process has `ORTE_PROC_FLAG_ALIVE` flag
dropped `WAITPID FIRED` state is activated (instead of `EXITED WITH NON-ZERO`)
leading to a hang that was observed.
Signed-off-by: Artem Polyakov <artpol84@gmail.com>
