dtypes support to oshmem scoll mpi. added comment to
oshmem scoll mpi component regarding casting size_t to int.
Fixed by Elena, Reviewed by Igor/Mike
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30856.
- similar to opal/shmem
- next step is some refactoring and merge into opal/shmem
Developed by Igor, reviewed by AlexM, MikeD
This commit fixes trac:4261.
This commit was SVN r30855.
The following Trac tickets were found above:
Ticket 4261 --> https://svn.open-mpi.org/trac/ompi/ticket/4261
finalize.
Closes trac:4290
cmr=v1.7.5:reviewer=miked
This commit was SVN r30854.
The following Trac tickets were found above:
Ticket 4290 --> https://svn.open-mpi.org/trac/ompi/ticket/4290
- Fix several typos is osc/rdma.
- Fix a locking issue in osc/sm that was caused by an incorrect
assumption about the semantics of opal_atomic_add_32.
- Always unlock the accumulation lock in osc/sm.
- The base of a processes shared memory window should be NULL if
the size is zero. Fixed.
cmr=v1.7.5:ticket=trac:4304
This commit was SVN r30853.
The following Trac tickets were found above:
Ticket 4304 --> https://svn.open-mpi.org/trac/ompi/ticket/4304
Follow on to SVN trunk r30850: consolidate the ibv_create_ah() calls
into a single loop, MPI_WAITALL-style. That is, call the (effectively
non-blocking) ibv_create_ah() for each endpoint. If we get
NULL+EAGAIN, it means that the UDP ARP is still ongoing down in the
kernel, so just try again later. We put these all into a single loop
because it allows us to parallelize the ARP progress in the kernel.
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30852.
The following SVN revision numbers were found above:
r30850 --> open-mpi/ompi@3641500442
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
ibv_create_ah() may need to effect an ARP resolution, which may take
some time. Rather than blocking in ibv_create_ah(), the usNIC driver
may return NULL and set errno to EAGAIN indicating that we should try
again (i.e., the ARP resolution is proceeding under the covers).
So add a simple loop here to loop over ibv_create_ah() until it
returns non-(NULL+EAGAIN). A future commit will make this a bit more
efficient.
Authored-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Dave Goodell <dgoodell@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30850.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Prior to this commit we matched local interfaces to remote interfaces in
order to create endpoints in a simplistic way. If any remote interfaces
were on the same subnet as any of our local interfaces then only local
interfaces would be paired (IP-routed remote interfaces would be
ignored).
This commit introduces a more general scheme which attempts to make the
"best" pairing of local interfaces to remote interfaces. We now cast
the problem as a graph theory problem known as the "Assignment Problem",
or finding a maximum-cardinality, minimum-weight bipartite matching. We
solve this problem by reducing the bipartite graph of interface
connectivity to a flow network and then solving for a minimum cost flow.
This is then easily converted into back into a matching on the original
bipartite graph.
In the new scheme, interfaces on the same subnet are preferred over
interfaces requiring intermediate routing hops and higher bandwidth
links are preferred over lower bandwidth links.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30849.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Querying the OS routing table is important for making decisions about
which local and remote interfaces should be paired into reliable
communication channels.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30848.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
This code is intended to support usNIC interface matching functionality.
We currently view that problem as essentially the "Assignment Problem"
(http://en.wikipedia.org/wiki/Assignment_problem), for which there are
many possible solution approaches, including flow-network analysis. In
the future, we might transition to a more nuanced view of the problem
which would likely also be flow-network based.
To this end, the current code focuses on providing one major algorithm
to the core usnic BTL: `ompi_btl_usnic_solve_bipartite_assignment`. It
also exposes several typical and necessary functions for constructing,
manipulating, and querying weighted, directed graphs.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30847.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30846.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
This commit adds mechanisms for writing and running unit tests in the
usnic BTL. The short version of how to run the tests is:
1. Configure with `--enable-ompi-btl-usnic-unit-tests`. This will cause
the unit testing code and test runner utility to be built.
2. Run the tests by running `ompi_btl_usnic_run_tests`.
See `README.test` for full details.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30845.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
These includes only exist in the Cisco-internal usnic-v1.6 code base,
but they should not exist anywhere except btl_usnic_compat.h in order to
minimize source differences between usnic-v1.6 and v1.7/trunk.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30844.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Lower layer (hardware or software) bugs can result in a mismatch between
our BTL-layer payload size and the actual packet length. We now check
that in order to catch these cases, which otherwise can result in
MPI-layer message corruption.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30843.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
We were missing a debug message for a very common recv case, making it a
bit harder to follow a debug log.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30842.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
There was a duplicated subnet check in the sender hash lookup routine.
This caused receivers to always fail the sender hash lookup if the
sender was in a different subnet, so the receiver would discard the
packet as though it were coming from a different job.
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30841.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
If ibv_create_ah fails, we will not initialize the `endpoint->proc`.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30840.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
This functionality is required for routable UDP/IP usnic traffic.
Previously we would only setup endpoints for remote interfaces on the
same subnet as the current module's local interface. This behavior
still holds if two processes share any common subnets. However, if the
two processes only have no subnets in common then we assume that all
interfaces are reachable from all other interfaces and wire them up in a
1-1, randomly-matched order somewhat similarly to the "tcp" BTL's
behavior.
Only match in different subnets if we detect UDP support in the lower
layer.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30839.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
This commit decouples OMPI deployment from the version(s) of the lower
layers of the stack by probing for UDP support.
Verbs applications assume a 40-byte header (there is no current
mechanism for querying payload offset). So to support a 42-byte UDP
header without causing existing applications like ibv_ud_pingpong or
older versions of OMPI to crash, we must inform libusnic_verbs that we
are aware of the nonstandard payload offset. We do this by overriding
the `transport_type` field of the device to be 42 before calling
`ibv_open_device`. If the library resets it to something else, then we
know the lower layers are UDP capable. Otherwise we use the older
custom-L2 format.
This necessitated some minor ugliness in common_verbs, but it's as tidy
as Jeff and I know how to make it right now.
This commit only adds support for UDP headers and connectivity over the
same L2 network, it does not touch routing or interface pairing.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30838.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Just trying to be deliberate about keeping fastpath-accessed fields
grouped together to fit into the same 64-byte cache line.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30837.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30836.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30835.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Reese Faucette <rfaucett@cisco.com>
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30834.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Reese Faucette <rfaucett@cisco.com>
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30833.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Valgrind showed this one, just a bit of sloppiness with the reference
counting.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30832.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
The logic did not correctly perform the OR behavior that is described
in the doxy docs for this function. This commit fixes the logic so
that a port will be included if it has supports any of the
capabilities indicated by the passed-in flags.
Authored-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Dave Goodell <dgoodell@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30831.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
oshmem collective can select MPI collectives modules as provider.
Developed by Elena, reviewed by Miked
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30808.
1. Changed rng_buff_t --> opal_rng_buff_t
2. All global variables obey the prefix rule
3. Old code has been removed
4. Found a couple of unnecessary includes
Refs trac:4298
This commit was SVN r30807.
The following Trac tickets were found above:
Ticket 4298 --> https://svn.open-mpi.org/trac/ompi/ticket/4298
We're going to be bringing a bunch of usnic code to the SVN trunk
soon, and I basically brought this commit over out of order. So I'm
reverting it for now; the same functionality will come back shortly.
This commit was SVN r30805.
The following SVN revision numbers were found above:
r30804 --> open-mpi/ompi@5bedcc15bf
These constants are now upstream (see
https://git.kernel.org/cgit/libs/infiniband/libibverbs.git/commit/?id=f57a9c67eabb9e7f19c624ac3c8c27b7be55796c),
so let's support them properly in Open MPI.
Added bonus: consolidating these checks up in
ompi_check_openfabrics.m4 allowed removing some custom checks and
AC_DEFINE's from the usnic configure.m4 script.
Also change the usnic/configure.m4 check for IBV_EVENT_GID_CHANGE to
use AC_CHECK_DECLS (vs. AC_CHECK_DECL).
cmr=v1.7.5:reviewer=dgoodell
This commit was SVN r30804.
* Use the prefix rule for global variables
* Elimiante seed_prng() since it isn't necessary any more
These files will need to get edited again then the RNG type obeys the
prefix rule.
Refs trac:4298
This commit was SVN r30803.
The following SVN revision numbers were found above:
r30801 --> open-mpi/ompi@e39d9f4080
The following Trac tickets were found above:
Ticket 4298 --> https://svn.open-mpi.org/trac/ompi/ticket/4298
- fix mxm/tl selection logic
- do not require memory registration if mxm/ud was selected
fixed by Alex, reviewed by Miked
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30802.
r of slots remaing to be assigned being only one/node. Regardless, it didn't work for the case where nodes were defined in ascending order of slots.
Tetsuya's proposed patch didn't solve the problem for me, but it did correct the case where cpus/proc > 1. The final patch requires that we loop over the assignment
algo until all procs are assigned or all nodes are filled - any remaining procs are then handled in the cleanup loop.
cmr=v1.7.5:reviewer=rhc:subject=fix map-by node for different cases
This commit was SVN r30798.
Running orte-restart requires an initialized sstore.
This opens the sstore component for FT builds just like
the snapc component.
This commit was SVN r30796.
