about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
This commit introduces the necessary logic to avoid that conflict. If a PLS component can identify that a daemon has failed, then we will set a flag indicating that fact. The xcast system will subsequently check that flag and, if it is set, will send all messages direct to the recipient. In the case of "kill local procs" and "terminate", the messages will go directly to each orted, thus bypassing any orted that has failed.
In addition, the xcast system will -not- wait for the messages to complete, but will return immediately (i.e., operate in non-blocking mode). Orterun will wait (via an event timer) for a period of time based on the number of daemons in the system to allow the messages to attempt to be delivered - at the end of that time, orterun will simply exit, alerting the user to the problem and -strongly- recommending they run orte-clean.
I could only test this on slurm for the case where all daemons unexpectedly died - srun apparently only executes its waitpid callback when all launched functions terminate. I have asked that Jeff integrate this capability into the OOB as he is working on it so that we execute it whenever a socket to an orted is unexpectedly closed. Meantime, the functionality will rarely get called, but at least the logic is available for anyone whose environment can support it.
This commit was SVN r16451.
The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component.
This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done:
As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in.
In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in.
The incoming changes revamp these procedures in three ways:
1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step.
The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic.
Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure.
2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed.
The size of this data has been reduced in three ways:
(a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes.
To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose.
(b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction.
(c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using.
While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly.
3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup.
It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging.
Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future.
There are a few minor additional changes in the commit that I'll just note in passing:
* propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details.
* requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details.
* cleanup of some stale header files
This commit was SVN r16364.
Tie stdin to /dev/null to prevent stdin from being closed and thus making stdin not work in slurm allocations.
This commit was SVN r15892.
The following Trac tickets were found above:
Ticket 1047 --> https://svn.open-mpi.org/trac/ompi/ticket/1047
Cleanup ALL instances of output involving the printing of orte_process_name_t structures using the ORTE_NAME_ARGS macro so that the number of fields and type of data match. Replace those values with a new macro/function pair ORTE_NAME_PRINT that outputs a string (using the new thread safe data capability) so that any future changes to the printing of those structures can be accomplished with a change to a single point.
Note that I could not possibly find outputs that directly print the orte_process_name_t fields, but only dealt with those that used ORTE_NAME_ARGS. Hence, you may still have a few outputs that bark during compilation. Also, I could only verify those that fall within environments I can compile on, so other environments may yield some minor warnings.
This commit was SVN r15517.
Short description: major changes include -
1. singletons now fork/exec a local daemon to manage their operations.
2. the orte daemon code now resides in libopen-rte
3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided.
I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine.
This commit was SVN r15390.
1. generalize orte_rml.xcast to become a general broadcast-like messaging system. Messages can now be sent to any tag on the daemons or processes. Note that any message sent via xcast will be delivered to ALL processes in the specified job - you don't get to pick and choose. At a later date, we will introduce an augmented capability that will use the daemons as relays, but will allow you to send to a specified array of process names.
2. extended orte_rml.xcast so it supports more scalable message routing methodologies. At the moment, we support three: (a) direct, which sends the message directly to all recipients; (b) linear, which sends the message to the local daemon on each node, which then relays it to its own local procs; and (b) binomial, which sends the message via a binomial algo across all the daemons, each of which then relays to its own local procs. The crossover points between the algos are adjustable via MCA param, or you can simply demand that a specific algo be used.
3. orteds no longer exhibit two types of behavior: bootproxy or VM. Orteds now always behave like they are part of a virtual machine - they simply launch a job if mpirun tells them to do so. This is another step towards creating an "orteboot" functionality, but also provided a clean system for supporting message relaying.
Note one major impact of this commit: multiple daemons on a node cannot be supported any longer! Only a single daemon/node is now allowed.
This commit is known to break support for the following environments: POE, Xgrid, Xcpu, Windows. It has been tested on rsh, SLURM, and Bproc. Modifications for TM support have been made but could not be verified due to machine problems at LANL. Modifications for SGE have been made but could not be verified. The developers for the non-verified environments will be separately notified along with suggestions on how to fix the problems.
This commit was SVN r15007.
symbols in them and environ is defined only in the final application
(probably in crt1.o). Apple provides a function for getting at the
environment, so use that instead if it's available.
This commit was SVN r14857.
This completes the minor changes required to the PLS components. Basically, there is a small change required to the parameter list of the orted cmd functions. I caught and did it for xcpu and poe, in addition to the components listed in my email - so I think that only leaves xgrid unconverted.
The orted fail-to-start mods will also make changes in the PLS components, but those can be localized so they come in one at a time.
This commit was SVN r14499.
finally brings in functionality that is already on the 1.2 branch, and
was developed and tested in the v1.2ofed branch (and other places).
Short version of new features:
* Support for ibv_fork_init()
* Automatically fill in the openib BTL bandwidth value by
querying the HCA port
* Installdirs functionality
* Fixes to always use -I in the Fortran wrapper compilers (#924)
* Gleb's mpool updates
* Remove some kruft in btl/openib/configure.m4, therefore
fixing the harmless warnings noted in #665
* Bunches of updates to the Linux RPM spec file
I.e., effectively the same thing that r14411 brought to the v1.2
branch.
Also effectively brought in r14432 and r14433 (some fixes on top of
the original r14411 commit to v1.2). Still need to bring in the moral
equivalent of r14445 after this commit (fixes to installdirs).
This commit was SVN r14449.
The following SVN revision numbers were found above:
r14411 --> open-mpi/ompi@83b31314ae
r14432 --> open-mpi/ompi@a48f160595
r14433 --> open-mpi/ompi@68f346d2bc
r14445 --> open-mpi/ompi@13d366b827
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
Collect the base 'orted' command line into a base function since most of the
PLS components were duplicating this code. Add AMCA parameter command line
component to the base set.
Add Aggregate MCA parameter support to the following PLS components:
- gridengine
- process
- slurm
- poe
- tm
Improve support for 'rsh' component.
Did/could not support the following components:
- bproc
- proxy
- xcpu
- cnos
- xgrid
The above components had peculiar needs that made it non-trivial to add an
option. The authors of these components need to help in supporting this
new option.
I was only able to test the SLURM and RSH components due to system availability.
The others should work without problem.
This commit was SVN r14284.
The following Trac tickets were found above:
Ticket 976 --> https://svn.open-mpi.org/trac/ompi/ticket/976
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
1. add a "cancel_operation" API to the pls components that allows orterun to demand that an orted operation (e.g., terminate_job) be immediately cancelled and abandoned.
2. changes the pls orted commands from blocking to non-blocking. This allows us to interrupt those operations should an orted be non-responsive. The change also adds an orte_abort_timeout that limits how long orterun will automatically wait for the orteds to respond - if the terminate command, for example, doesn't see orted response within that time, then we printout an appropriate error message and just give up.
3. modifies orterun to allow multiple ctrl-c's to simply abort the program even if the orteds have not responded
4. does some cleanup on the orte-level mca params so that their implementation looks a lot more like that of ompi - makes it easier to maintain. This change also includes the definition of an orte_abort_timeout struct and associated MCA param (can't have too many!) so you can set the time after which orterun gives up on waiting for orteds to respond
This needs more testing before migrating to 1.2.
This commit was SVN r13304.
then exec the "srun..." from there. But somewhere along the line, we
switched to having a copy of environ and modifying that. It looks
like we forgot to update the stuff for --prefix behavior. So this
commit fixes the setenv's for PATH and LD_LIBRARY_PATH to modify the
environ copy (not environ itself) so that the values properly get
passed down to the srun environment via execve().
This restores --prefix behavior in the SLURM pls.
This commit was SVN r13239.
components that use configure.m4 for configuration or are always built.
The macro has not been needed since moving to configure types other than
configure.stub
Fixes trac:590
This commit was SVN r13031.
The following Trac tickets were found above:
Ticket 590 --> https://svn.open-mpi.org/trac/ompi/ticket/590
Modify the RMAPS framework so we eliminate communicating a map to a backend node when certain attributes are set. The proxy functions are now implemented in the base, and a check made for HNP/non-HNP operation made in the map_jobs function prior to execution.
This commit was SVN r12619.
Note that Bproc won't support this operation, so we just ignore the --reuse-daemons directive.
I'm afraid I don't understand the POE and XGrid environments well enough to attempt the necessary modifications.
Also, please note that XGrid support has been broken on the trunk. I don't understand the code syntax well enough to make the required changes to that PLS component, so it won't compile at the moment. I'm hoping Brian has a few minutes to fix it after SC.
This commit was SVN r12614.
Accordingly, there are new APIs to the name service to support the ability to get a job's parent, root, immediate children, and all its descendants. In addition, the terminate_job, terminate_orted, and signal_job APIs for the PLS have been modified to accept attributes that define the extent of their actions. For example, doing a "terminate_job" with an attribute of ORTE_NS_INCLUDE_DESCENDANTS will terminate the given jobid AND all jobs that descended from it.
I have tested this capability on a MacBook under rsh, Odin under SLURM, and LANL's Flash (bproc). It worked successfully on non-MPI jobs (both simple and including a spawn), and MPI jobs (again, both simple and with a spawn).
This commit was SVN r12597.
If you want to look at our launch and MPI process startup times, you can do so with two MCA params:
OMPI_MCA_orte_timing: set it to anything non-zero and you will get the launch time for different steps in the job launch procedure. The degree of detail depends on the launch environment. rsh will provide you with the average, min, and max launch time for the daemons. SLURM block launches the daemon, so you only get the time to launch the daemons and the total time to launch the job. Ditto for bproc. TM looks more like rsh. Only those four environments are currently supported - anyone interested in extending this capability to other environs is welcome to do so. In all cases, you also get the time to setup the job for launch.
OMPI_MCA_ompi_timing: set it to anything non-zero and you will get the time for mpi_init to reach the compound registry command, the time to execute that command, the time to go from our stage1 barrier to the stage2 barrier, and the time to go from the stage2 barrier to the end of mpi_init. This will be output for each process, so you'll have to compile any statistics on your own. Note: if someone develops a nice parser to do so, it would be really appreciated if you could/would share!
This commit was SVN r12302.
Only close off stdout/stderr from the daemons if we are not debugging the slurm pls and --debug-daemons was not passed.
This commit was SVN r12276.
The following Trac tickets were found above:
Ticket 352 --> https://svn.open-mpi.org/trac/ompi/ticket/352
This patch will cause a problem for cnos, however, as there we want to specifically tell the backends to be "null". I'm working on that issue.
This commit was SVN r12225.
I have tested on rsh, slurm, bproc, and tm. Bproc continues to have a problem (will be asking for help there).
Gridengine compiles but I cannot test (believe it likely will run).
Poe and xgrid compile to the extent they can without the proper include files.
This commit was SVN r12059.
- use the OPAL functions for PATH and environment variables
- make all headers C++ friendly
- no unamed structures
- no implicit cast.
Plus a full implementation for the orte_wait functions.
This commit was SVN r11347.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
1. Changed the RMGR and PLS APIs to add "signal_job" and "signal_proc" entry points. Only the "signal_job" entries are implemented - none of the components have implementations for "signal_proc" at this time. Thus, you can signal all of the procs in a job, but cannot currently signal only one specific proc.
2. Implemented those new API functions in all components except xgrid (Brian will do so very soon). Only the rsh/ssh and fork modules have been tested, however, and only under OS-X.
3. Added signal traps and callback functions for SIGUSR1/2 to orterun/mpirun that catch those signals and call the appropriate commands to propagate them out to all processes in the job.
4. Added a new test directory under the orte branch to (eventually) hold unit and system level tests for just the run-time. Since our test branch of the repository is under restricted access, people working on the RTE were continually developing their own system-level tests - thus making it hard to help diagnose problems. I have moved the more commonly-used functions here, and added one specifically for testing the SIGUSR1/2 functionality.
I will be contacting people directly to seek help with testing the changes on more environments. Other than compile issues, you should see absolutely no change in behavior on any of your systems - this additional functionality is transparent to anyone who does not issue a SIGUSR1/2 to mpirun.
Ralph
This commit was SVN r10258.
option as discussed on the devel-core mailing list. The Big
Difference is that instead of hard-coding the strings "/lib" and
"/bin" in to append to the prefix, we append the basename of the local
libdir and bindir. Hence, if your libdir is $prefix/lib64, we'll
append /lib64 to construct the remote node's LD_LIBRARY_PATH (etc.).
Also appended the orterun.1 man page to include a description of
--prefix, how it is constructed, what it handles / what it does not,
etc.
This commit was SVN r9930.
argv[0] and the cwd on the target node (i.e., the node where the
executable will be running in all systems except BProc, where the
searches are run on the node where orterun is invoked).
- fork pls now does cwd and argv[0] search in orted
- bproc pls does cwd and argv[0] search in orterun
- cwd behavior slightly different:
- if user specifies a -wdir to orterun, we chdir() to there; if we
can't for some reason, abort
- if user does not specify a -wdir, try to chdir() to the dir where
orterun was invoked. If we can't for some reason (e.g., it
doesn't exist on the target node), then try to chdir($HOME). If
we can't do that, then just live with whatever default directory
we were put in.
This commit was SVN r9068.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
oversubscribed on a node. And thus whether to call sched_yield or not.
The value of node->node_slots_inuse does not currently represent the number of
slots actually in use, at the moment. This is actually a bug in the RAS/RMAPS
base components, but the fix for that specific bug is bigger than we want to
address at the moment (but will certianly do so in the near future).
Since we cannot trust this value, use the total number of mapped processes
(which was properly set by the RMAPS component upon mapping -- Just not
properly propagated back to the registry's node segment) from the process
mapping.
In addition to this change I cleaned up a couple of the debug messages. It
seems that TM and RSH are the only two directly effected by this. SLURM
would be if that section of code wasn't currently inactive, but put the fix
in for prosparity.
This commit was SVN r7743.
