Will be replaced by PRRTE. Ensure that OMPI and OPAL layers build
without reference to ORTE. Setup opal/pmix framework to be static.
Remove support for all PMI-1 and PMI-2 libraries. Add support for
"external" pmix component as well as internal v4 one.
remove orte: misc fixes
- UCX fixes
- VPATH issue
- oshmem fixes
- remove useless definition
- Add PRRTE submodule
- Get autogen.pl to traverse PRRTE submodule
- Remove stale orcm reference
- Configure embedded PRRTE
- Correctly pass the prefix to PRRTE
- Correctly set the OMPI_WANT_PRRTE am_conditional
- Move prrte configuration to the end of OMPI's configure.ac
- Make mpirun a symlink to prun, when available
- Fix makedist with --no-orte/--no-prrte option
- Add a `--no-prrte` option which is the same as the legacy
`--no-orte` option.
- Remove embedded PMIx tarball. Replace it with new submodule
pointing to OpenPMIx master repo's master branch
- Some cleanup in PRRTE integration and add config summary entry
- Correctly set the hostname
- Fix locality
- Fix singleton operations
- Fix support for "tune" and "am" options
Signed-off-by: Ralph Castain <rhc@pmix.org>
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
Until now sqrt(n) was missed as a factor for odd square numbers n. This
lead to suboptimal results of MPI_Dims_create for input numbers like 9,
25, 49, ... Fix the results by including sqrt(n) in the search for
factors.
Refs: #7186
Signed-off-by: Michael Lass <bevan@bi-co.net>
I'm restoring the info function pointers to the IO module
but allowing the function pointers to be NULL (eg in ompio).
And letting romio321 set its function pointers for those
routines.
This means the info system uses the new OMPI-level info
system for most things, but skips it and uses the pre-existing
romio info system just for the romio module.
It's possible to convert romio, but I went a ways down that
path and found it kind of convoluted. Having pointers from
the lower level ADIO_File back to the higher level ompi_file_t
wasn't too bad, but I got stuck trying to figure out where/how
to register the infosubscribe_subscribe callbacks vs the way
initial k/v values are scattered around the romio code currently.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
MPI standard states a user MPI_Op and/or user MPI_Datatype can be free'd
after a call to a non blocking collective and before the non-blocking
collective completes.
Retain user (only) MPI_Op and MPI_Datatype when the non blocking call is
invoked, and set a request callback so they are free'd when the MPI_Request
completes.
Thanks Thomas Ponweiser for reporting this
Fixesopen-mpi/ompi#2151Fixesopen-mpi/ompi#1304
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
do not check some input parameters when an {in,out}degree is zero
Thanks Junchao Zhang for analyzing and reporting this issue.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
This commit DELETES the removed MPI1 functions and datatypes from
both the mpi.h header and from the library (they were deleted from the
MPI standard in MPI-3.0).
WARNING: This changes the MPI API in a non-backwards compatible way.
This also removes the configure option that was added in Open
MPI v4.0.x, requiring users to change their apps if they are
using any of these almost 20 year old APIs.
This commit removes the following MPI1 removed functions and datatypes:
MPI_Address
MPI_Errhandler_create
MPI_Errhandler_get
MPI_Errhandler_set
MPI_Type_extent
MPI_Type_hindexed
MPI_Type_hvector
MPI_Type_struct
MPI_Type_UB
MPI_Type_LB
Signed-off-by: Geoffrey Paulsen <gpaulsen@us.ibm.com>
Refs https://github.com/open-mpi/ompi/issues/6278.
This commit is intended to be cherry-picked to v4.0.x and
the following commit will ammend to this functionality for
master's removal.
Changes the prototypes for MPI removed functions in the
following ways:
There are 4 cases:
1) User wants MPI-1 compatibility (--enable-mpi1-compatibility)
MPI_Address (and friends) are declared in mpi.h with
deprecation notice
2) User does not want MPI-1 compatibility, and has a C11-capable
compiler
Declare an MPI_Address (etc.) macro in mpi.h, which will
cause a compile-time error using _Static_assert C11 feature
3) User does not want MPI-1 compatibility, and does not have a
C11-capable compiler, but the compiler supports error function
attributes.
Declare an MPI_Address (etc.) macro in mpi.h, which will
cause a compile-time error using error function attribute.
4) User does not want MPI-1 compatibility, and does not have a
C11-capable compiler, or a compiler that supports error
function attributes.
Do not declare MPI_Address (etc.) in mpi.h at all.
Unless the user is compiling with something like -Werror,
this will allow the user's code to compile. We are
choosing this because it seems like a losing battle to
make some kind of compile time error that is friendly to
the user (and doesn't make it look like mpi.h itself is broken).
On v4.0.x, this will allow the user code to both compile
(albeit with a warning) and link (because the MPI_Address
will be in the MPI library because we are preserving ABI
back to 3.0.x).
On master/v5.0.x, this will allow the user code to compile,
but it will fail to link (because the MPI_Address symbol will
not be in the MPI library).
Signed-off-by: Geoffrey Paulsen <gpaulsen@us.ibm.com>
... and add `MPI_COMPLEX4`.
This commit changes values of existing `OMPI_DATATYPE_MPI_*` macros.
This change does not affect ABI compatibility of `libmpi.so` and the
like because these values are only used in OMPI internal code.
On the other hand, `ompi_datatype_t::id` values of existing datatypes
are not changed and 73 is newly assigned to for `MPI_COMPLEX4` to
retain ABI compatibility.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
opal_string_copy() takes care of all the string computations.
Specifically: when we converted to opal_string_copy(), we accidentally
left the *source* length as the argument, not the *target* length,
which resulted in one less character being copied than intended (as
was showing up in MTT C++ testing results).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit fixes edge cases of `r = 38` and `r = 308`.
As defined in the MPI standard, `TYPE_CREATE_F90_REAL` and
`TYPE_CREATE_F90_COMPLEX` must be consistent with the Fortran
`SELECTED_REAL_KIND` function. The `SELECTED_REAL_KIND` function is
defined based on the `RANGE` function. The `RANGE` function returns
`INT(MIN(LOG10(HUGE(X)), -LOG10(TINY(X))))` for a real value `X`.
The old code considers only `INT(LOG10(HUGE(X)))` using `*_MAX_10_EXP`.
This commit adds `INT(-LOG10(TINY(X)))` part using `*_MIN_10_EXP`.
This bug affected the following `p`-`r` combinations.
| p | r | expected | returned | expected | returned |
| :------------ | --: | :-------- | :-------- | :------- | :-------- |
| MPI_UNDEFINED | 38 | REAL8 | REAL4 | COMPLEX16 | COMPLEX8 |
| 0 <= p <= 6 | 38 | REAL8 | REAL4 | COMPLEX16 | COMPLEX8 |
| MPI_UNDEFINED | 308 | REAL16 | REAL8 | COMPLEX32 | COMPLEX16 |
| 0 <= p <= 15 | 308 | REAL16 | REAL8 | COMPLEX32 | COMPLEX16 |
MPICH returns the same result as Open MPI with this fix.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
In order for this to work, error management needs to also be added to
NBC, from separate PR
Signed-off-by: Aurelien Bouteiller <bouteill@icl.utk.edu>
The error field of requests needs to be rearmed at start, not at create
Signed-off-by: Aurelien Bouteiller <bouteill@icl.utk.edu>
check for providing a data representation that is actually supported
by ompio.
Add also one check for a non-NULL pointer in mpi/c/file_set_view
for the data representation.
Also fixes parts of issue #5643
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
Several fixes to string handling:
1. strncpy() -> opal_string_copy() (because opal_string_copy()
guarantees to NULL-terminate, and strncpy() does not)
2. Simplify a few places, such as:
* Since opal_string_copy() guarantees to NULL terminate, eliminate
some memsets(), etc.
* Use opal_asprintf() to eliminate multi-step string creation
There's more work that could be done; e.g., this commit doesn't
attempt to clean up any strcpy() usage.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
The Open MPI code base assumed that asprintf always behaved like
the FreeBSD variant, where ptr is set to NULL on error. However,
the C standard (and Linux) only guarantee that the return code will
be -1 on error and leave ptr undefined. Rather than fix all the
usage in the code, we use opal_asprintf() wrapper instead, which
guarantees the BSD-like behavior of ptr always being set to NULL.
In addition to being correct, this will fix many, many warnings
in the Open MPI code base.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
so latest ROM-IO can be used with Open MPI.
Note this first and naive implementation does not use the wait_fn callback.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
This code is the implementation of Software-base Performance Counters as described in the paper 'Using Software-Base Performance Counters to Expose Low-Level Open MPI Performance Information' in EuroMPI/USA '17 (http://icl.cs.utk.edu/news_pub/submissions/software-performance-counters.pdf). More practical usage information can be found here: https://github.com/davideberius/ompi/wiki/How-to-Use-Software-Based-Performance-Counters-(SPCs)-in-Open-MPI.
All software events functions are put in macros that become no-ops when SOFTWARE_EVENTS_ENABLE is not defined. The internal timer units have been changed to cycles to avoid division operations which was a large source of overhead as discussed in the paper. Added a --with-spc configure option to enable SPCs in the Open MPI build. This defines SOFTWARE_EVENTS_ENABLE. Added an MCA parameter, mpi_spc_enable, for turning on specific counters. Added an MCA parameter, mpi_spc_dump_enabled, for turning on and off dumping SPC counters in MPI_Finalize. Added an SPC test and example.
Signed-off-by: David Eberius <deberius@vols.utk.edu>
the interface if file_get_type_extent did not check
whether the input datatype is valid or not.
Makes the e_get_type_extend_2 test from the ibm testsuite pass.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
There was a race condition in 35438ae9b5: if multiple threads invoked
ompi_mpi_init() simultaneously (which could happen from both MPI and
OSHMEM), the code did not catch this condition -- Bad Things would
happen.
Now use an atomic cmp/set to ensure that only one thread is able to
advance ompi_mpi_init from NOT_INITIALIZED to INIT_STARTED.
Additionally, change the prototype of ompi_mpi_init() so that
oshmem_init() can safely invoke ompi_mpi_init() multiple times (as
long as MPI_FINALIZE has not started) without displaying an error. If
multiple threads invoke oshmem_init() simultaneously, one of them will
actually do the initialization, and the rest will loop waiting for it
to complete.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This checkin mainly concerns our internal info keys that are registering
for callbacks via opal_infosubscribe_subscribe(). Those keys need to have
an extra __IN_<key>/val stored to preserve their pre-callback value. So
that means our internal keys are limited to 5 chars shorter than the usual
key length limit.
The code previously would have been silently inactive if a large key happened
to come in, now it warns and also uses snprintf() to avoid compiler warnings.
I'm also making the top-level MPI_Info_set warn if the user uses our reserved
"__IN_" prefix. I had wanted the feature to be more invisible than that, but
it would require a more sophisticated approach to change that.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
Per MPI-3.1:8.7.1 p361:11-13, it's valid for MPI_FINALIZED to be
invoked during an attribute destruction callback (e.g., during the
destruction of keyvals on MPI_COMM_SELF during the very beginning of
MPI_FINALIZE). In such cases, MPI_FINALIZED must return "false".
Prior to this commit, we hung in FINALIZED if it were invoked during
a COMM_SELF attribute destruction callback in FINALIZE. See
https://github.com/open-mpi/ompi/issues/5084.
This commit converts the MPI_INITIALIZED / MPI_FINALIZED
infrastructure to use a single enum (ompi_mpi_state, set atomically)
to represent the state of MPI:
- not initialized
- init started
- init completed
- finalize started
- finalize past COMM_SELF destruction
- finalize completed
The "finalize past COMM_SELF destruction" state is what allows us to
return "false" from MPI_FINALIZED before COMM_SELF has been fully
destroyed / all attribute callbacks have been invoked.
Since this state is checked at nearly every MPI API call (to see if
we're outside of the INIT/FINALIZE epoch), care was taken to use
atomics to *set* the ompi_mpi_state value in ompi_mpi_init() and
ompi_mpi_finalize(), but performance-critical code paths can simply
read the variable without needing to use a slow call to an
opal_atomic_*() function.
Thanks to @AndrewGaspar for reporting the issue.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
This commit adds a new configure option: --enable-mpi1-compat. Without
this option we will no longer provide APIs, typedefs, and defines that
were removed from the standard in MPI-3.0. This option will exist for
one major release (Open MPI v4.x.x) and then the option and associated
code will be removed in Open MPI v5.x.x. Open MPI has already
internally prepared for this change. Please prepare your codes
accordingly.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Allowing MPI_PROC_NULL as a neighbor in any topology allows us to add
gaps on the send and recv buffers. This does make the traditional
neighbor collective have a similar behavior as the V version, but in
same time it allows the users to skip the step where they prepare the
counts and the displacement array.
For more info please take a look at issue #4675.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
As discussed on https://github.com/mpi-forum/mpi-issues/issues/77#issuecomment-369663119
the conversion to double in the MPI_Wtime decrease the range
and accuracy of the resulting timer. By setting the timer to
0 at the first usage we basically maintain the accuracy for
194 days even for gettimeofday.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
Per MPI 3.1 chapter 13.3 :
"Derived etypes can be constructed by using any of the MPI
datatype constructor routines, provided all resulting typemap
displacements are non-negative and monotonically nondecreasing."
Same restriction applies to ftypes.
add the OMPI_DATATYPE_CHECK_FOR_VIEW() macro that is
check the underlying opal_datatype_t is monotonic, on top
of all checks performed in OMPI_DATATYPE_CHECK_FOR_RECV().
Since checking monotoniciy is expensive, check is only performed
when needed, but the result is cached by ompi_datatype_is_monotonic().
Thanks Wei-keng Liao for the valuable feedback.
Thanks George for the guidance.
Refs. open-mpi/ompi#4682
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
It should have always been #define'd in order to correctly handle the
multi-threaded case.
Also fix indentation in ompi/mpi/c/comm_get_errhandler.c
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
The current versions of these functions have a fatal flaw. If a
errhandler set and free call is made by another thread while the
thread calling get is between the cmpset and retain then we will
retain an invalid object. Fixing this by just using locking. This is
not a critical path so this should be ok.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit renames the atomic compare-and-swap functions to indicate
the return value. This is in preperation for adding support for a
compare-and-swap that returns the old value. At the same time the
return type has been changed to bool.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
