- Borrow configure.m4 from the mvapi btl. One of the uDAPL headers emits a
warning when -pedantic is enabled, so strip it out.
- Change function check in ompi_check_dapl.m4 from dat_ia_open to
dat_registry_list_providers.. dat_ia_open wasn't working right
- Make the references to prepare_dst, put, and get NULL for now
- Add opal_output() calls in all the udapl interface functions for debugging
- Add evd_qlen component parameter to control event dispatcher queue length
- First stab at component_init and module_init
- Misc cleanups - whitespace, dead code removal
- Update copyrights to 2006
This commit was SVN r8701.
r8698), with changes below:
- Split wrapper flags into those required for each of the three projects,
and cleaned up some cruft (including the LIBMPI_EXTRA_*FLAGS) through-
out the build system
- Added opal_init_util and opal_finalize_util to allow init / cleanup
of all the opal code that doesn't require the MCA system
- Create standalone key=value file parser, based on the one that used
to be in the mca param parser, so that it can be shared in multiple
places
- Add wrapper datafiles for opal, orte, and ompi wrappers, and add
wrapper compiler with support for all the old features
This commit was SVN r8699.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r8690
r8698
the failure wasn't being properly propogated up from ompi_find_type and
resulting in bad #define values in ompi_config.h
* Fix issue where we could emit illegal sh code if we were checking for a
type with no corresponding C types listed. Thanks to Ralf for tracking
this one down.
* Fix a couple more messages to match all the others.
This commit was SVN r8685.
determine values like Fortran alignment (which can only be determined by
running a program) when cross-compiling. By providing cache values, the
programs will not be run at all, and life will be good. Also clean up
some macro interfaces so that they are a bit easier to use, at the cost
of horrid internals ;).
This commit was SVN r8684.
information on Windows with the CL compiler. We don't use it, and we
were running into trouble with the compiler on some tests
This commit was SVN r8558.
* Make sure --without-BTL works for all BTLs
* Fix copy-n-paste error in aix timer configrue help string
This should go to the v1.0 branch
This commit was SVN r8554.
- don't fail to configure if threads aren't found, since
we don't have thread support on windows
- rather than setting the asm file name to none in asm-data,
special case windows w/ CL in the ompi_config_asm macros.
Otherwise, there were some warnings during make dist and
configure that didn't need to be there.
This commit was SVN r8502.
- add the right asm format
- add checks for some constants / fields that cygwin
doesn't have in the stacktrace code
- fix for slightly more verbose libtool 2 betas that
have multiple lines for link output
This commit was SVN r8501.
value that is not internally translated). In order to make all the version
of libtool happy, the simplest way is to have the source file at the end of
the command line.
This commit was SVN r8451.
is a short name usually the one that the compiler have. If we are using
wrappers around a compiler the flavor will be the real name of the compiler.
The vendor is a short name for the maker of the compiler. The GNU compilers
get gnu and the microsoft one get microsoft.
These 2 macros provide a simple way to check for specific brand of compilers
and to generate the correct code to test with the autoconf macros. They are
not yet completed, I add just some of the compilers/vendors but feel free to
add more if you need/want.
This commit was SVN r8417.
x86_64 as most opterons do. So add test to see how many bytes a long is,
and if it's 8 bytes, assume we're on an AMD64 instead of an IA32 for the
purposes of assembly.
This commit was SVN r8384.
- since we now have three places where we need to add a -l<foo> if
and only if it isn't already in something in LIBS that provides
symbol bar...
This commit was SVN r8370.
features. Now it works with gfortran as well.
The problem was that the cast between LOGICAL and INTEGER is not a Fortran language feature. The easiest solution around this problem is to have a C function that print the value. We set the value in fortran and then call the C function to print it out.
This commit was SVN r8266.
case of:
sizeof(MPI_Flogical) != sizeof (int)
and
Fortran value of .TRUE. != 1
as is often the case.
- Check in configure the value of .TRUE., the C-type coresponding to
logical and check, that fortran compiler does not do something strange
with arrays of logicals
- Convert all occurrences of logicals in the fortran wrappers, only
in case it is needed.
*Please note* Implementation of MPI_Cart_sub needed special treatment.
- Output these value in ompi_info -a
- Clean up the prototypes_mpi.h to just have a single definition and
thereby deleting the necessity for prototypes_pmpi.h
- configured, compiled and tested with F90-program, which uses
MPI_Cart_create and MPI_Cart_get:
linux ia32, gcc (no testing, as no f90)
linux ia32, gcc --disable-mpi-f77 --disable-mpi-f90 (had a bug there)
linux ia32, icc-8.1
linux opteron, gcc-3.3.5, pgcc, pathccx/pathf90 (tested just
pgi-compiler)
linux em64t, gcc, icc-8.1 (tested just icc)
This commit was SVN r8254.
component/base Makefile.am files, reducing the time configure spends
stamping out Makefiles at the end
* Install base_impl.h file when devel-headers are being installed
This commit was SVN r8200.
options as part of the --with-wrapper-{*flags,libs} options to configure,
we'll eat one of them, which can have unintended issues. For example,
--with-wrapper-ldflags="-Wl,-rpath -Wl,pathA -Wl,-rpath -Wl,pathB"
will result in us removing the second -Wl,-rpath, which will result
in wrapper ldflags of -Wl,-rpath -Wl,pathA -Wl,pathB which doesn't
really do what the user intended. We now always pass the user-
specified flags completely unmodified, bypassing the OMPI_UNIQ
routine
This commit was SVN r8193.
it doesn't support it -- the compiler will automatically convert the
unsupported type to a type that it *does* support. For example, if
you try to use INTEGER*16 and the compiler doesn't support it, it may
well automatically convert it to INTEGER*8 for you (!). So we have to
check the actual size of the type once we determine that the compiler
doesn't error if we try to use it (i.e,. the compiler *might* support
that type). If the size doesn't match the expected size, then the
compiler doesn't really support it.
The F77 configure code actually handled this properly. The F90 code
did not quite do it right. This patch brings the F90 code up to the
same structure as the F77 code, albiet not m4-ized properly. I also
added a comment to config/f77_check.m4 that explains *why* we do this
extra size check (because no explanation was given).
The impetus for this was that xlf* on OS X 10.3 was not recognizing
that INTEGER*16 was not supported, and mpi-f90-interfaces.h was being
assembled incorrectly. This patch fixes this problem.
There is still one more problem, but waiting for some help from Craig
R on that (function pointers in F90 declarations).
This commit was SVN r8107.
the component's LIBS if the library was found in the default search paths.
However, it would also add -Is for default search paths and other nasty things,
so it seemed best to convert it to the OMPI_CHECK_PACKAGE macro so that it
behaved like all the other packages out there.
This commit was SVN r8007.
--enable-mpi-{cxx,f77,f90} so that people aren't confused about what
they are actually disabling.
This should go to the 1.0 branch
This commit was SVN r7851.
really crappy job of trying to emulate the inline assembly mode of GCC (and will
completely rewite the assembly, which seems to be bad in my opinion). GCC and
the AIX assembler don't see eye-to-eye on what GCC emits when doing inline
assembly. That's two compilers and no actual working support. So just punt and
fall back to XLC inline assembly or non-inlined assembly.
This commit was SVN r7800.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
Brooks Davis. Now handle everything as hex, and we don't have to
worry about signed/unsigned implementations of integers in shell and
expr.
This commit was SVN r7729.
a VPATH tree. Fix that problem, as well as some potential shell escaping badness
if a version number or path ever had a space in it.
This commit was SVN r7586.
