This commit moves the initalization/finalization of opal_event and opal_progress
to opal_init/finalize. These were previously init/final in ORTE which is an
abstraction violation. After talking about it we concluded that there are no
ordering issues that require these to be init/final in ORTE instead of OPAL.
I ran the IBM test suite against this commit and it didn't turn up any new
failures so I think it is good to go.
Let us know if this causes problems.
This commit was SVN r14773.
environment variables corresopnding to framework MCA parameters so
that the opal MCA base loads '''all''' components (not just the ones
specified in the environment variables). This has the side-effect of
not showing the user's value when displaying the framework MCA
parameters via --param output. For example:
{{{
shell% setenv OMPI_MCA_btl foo
shell% ompi_info --param btl base
}}}
The above sequence would show a "<none>" value for the "btl" parameter
instead of "foo".
This commit restores the environment after we munge it to make the
loader load all components. Hence, the above command sequence will
show "foo" for the "btl" parameter value, not "<none>".
This commit was SVN r14771.
This is required to tighten up the BTL semantics. Ordering is not guaranteed,
but, if the BTL returns a order tag in a descriptor (other than
MCA_BTL_NO_ORDER) then we may request another descriptor that will obey
ordering w.r.t. to the other descriptor.
This will allow sane behavior for RDMA networks, where local completion of an
RDMA operation on the active side does not imply remote completion on the
passive side. If we send a FIN message after local completion and the FIN is
not ordered w.r.t. the RDMA operation then badness may occur as the passive
side may now try to deregister the memory and the RDMA operation may still be
pending on the passive side.
Note that this has no impact on networks that don't suffer from this
limitation as the ORDER tag can simply always be specified as
MCA_BTL_NO_ORDER.
This commit was SVN r14768.
fix (r14749) and then backed it out (r14753).
As we are unable to send more than a 32 bits length over TCP in one go, there
is no reason to have an uint64 length in the header. This reduce the size
of the TCP header.
This commit was SVN r14755.
The following SVN revision numbers were found above:
r14749 --> open-mpi/ompi@48c026ce6b
r14753 --> open-mpi/ompi@28ed850b4c
r14703 for the point-to-point component.
* Associate the list of long message requests to poll with the
component, not the individual modules
* add progress thread that sits on the OMPI request structure
and wakes up at the appropriate time to poll the message
list to move long messages asynchronously.
* Instead of calling opal_progress() all over the place, move
to using the condition variables like the rest of the project.
Has the advantage of moving it slightly further along in the
becoming thread safe thing.
* Fix a problem with the passive side of unlock where it could
go recursive and cause all kinds of problems, especially
when progress threads are used. Instead, have two parts of
passive unlock -- one to start the unlock, and another to
complete the lock and send the ack back. The data moving
code trips the second at the right time.
This commit was SVN r14751.
The following SVN revision numbers were found above:
r14703 --> open-mpi/ompi@2b4b754925
mca_btl_tcp_hdr_t struct and remove the need for the heterogeneous
padding by changing the type of the "size" member to be uint32_t
(vs. uint64_t). The value would never be greater than 32 bits anyway,
so having the type be uint64_t was wasteful.
This commit was SVN r14749.
wireup. For small clusters or clusters with decent ARP lookup and
connect times, this will have marginal impact. For systems with either
bad ARP lookup times or long connect times, increasing this number
to something much closer to SOMAXCONN (128 on most modern machines) will
result in a faster OOB wireup. Don't set higher than SOMAXCONN or you
can end up with lots of connect() retries and we'll end up slower.
This commit was SVN r14742.
* Remove unused declaration
* remove unused variable warning when not using progress threads
* If we're using progress threads, we want to lock, not trylock
when in progress, since it was called from the wakeup thread
and not the progress function
This commit was SVN r14739.
to do while(...) { } then we can't change the variables in the ...
atomically, but should do it while holding the module lock.
* Fix dumb communicator creation error when we don't create the progress
stuff (because a window already exists), where we would accidently
jump to the error case.
This commit was SVN r14715.
The primary change that underlies all this is in the OOB. Specifically, the problem in the code until now has been that the OOB attempts to resolve an address when we call the "send" to an unknown recipient. The OOB would then wait forever if that recipient never actually started (and hence, never reported back its OOB contact info). In the case of an orted that failed to start, we would correctly detect that the orted hadn't started, but then we would attempt to order all orteds (including the one that failed to start) to die. This would cause the OOB to "hang" the system.
Unfortunately, revising how the OOB resolves addresses introduced a number of additional problems. Specifically, and most troublesome, was the fact that comm_spawn involved the immediate transmission of the rendezvous point from parent-to-child after the child was spawned. The current code used the OOB address resolution as a "barrier" - basically, the parent would attempt to send the info to the child, and then "hold" there until the child's contact info had arrived (meaning the child had started) and the send could be completed.
Note that this also caused comm_spawn to "hang" the entire system if the child never started... The app-failed-to-start helped improve that behavior - this code provides additional relief.
With this change, the OOB will return an ADDRESSEE_UNKNOWN error if you attempt to send to a recipient whose contact info isn't already in the OOB's hash tables. To resolve comm_spawn issues, we also now force the cross-sharing of connection info between parent and child jobs during spawn.
Finally, to aid in setting triggers to the right values, we introduce the "arith" API for the GPR. This function allows you to atomically change the value in a registry location (either divide, multiply, add, or subtract) by the provided operand. It is equivalent to first fetching the value using a "get", then modifying it, and then putting the result back into the registry via a "put".
This commit was SVN r14711.
* Combine polling of the long requests and buffer requests into
one type, and in one place
* Associate the list of requests to poll with the component, not
the individual modules
* add progress thread that sits on the OMPI request structure
and wakes up at the appropriate time to poll the message
list. Not the best, but without some asynch notification
from the PML that a given set of requests has completed, there
isn't much better
* Instead of calling opal_progress() all over the place, move
to using the condition variables like the rest of the project.
Has the advantage of moving it slightly futher along in the
becoming thread safe thing
* Fix a problem with the passive side of unlock where it could
go recursive and cause all kinds of problems, especially
when progress threads are used. Instead, have two parts of
passive unlock -- one to start the unlock, and another to
complete the lock and send the ack back. The data moving
code trips the second at the right time.
This commit was SVN r14703.
We eagerly send data up to btl_*_eager_limit with the match
Upon ACK of the MATCH we start using send/receives of size
btl_*_max_send_size up to the btl_*_rdma_pipeline_offset
After the btl_*_rdma_pipeline_offset we begin using RDMA writes of
size btl_*_rdma_pipeline_frag_size.
Now, on a per message basis we only use the above protocol if the
message is larger than btl_*_min_rdma_pipeline_size
btl_*_eager_limit - > same
btl_*_max_send_size -> same
btl_*_rdma_pipeline_offset -> btl_*_min_rdma_size
btl_*_rdma_pipeline_frag_size -> btl_*_max_rdma_size
btl_*_min_rdma_pipeline_size is new..
This patch also moves all BTL common parameters initialisation into
btl_base_mca.c file.
This commit was SVN r14681.
* Move ipv6comat.h code into opal_config_bottom.h and change into some
more intelligent testing of structures
* Change opal's if interface to use sockaddr instead of sockaddr_storage,
as the RFCs suggest we do
* Move the networking code in opal that isn't directly related to if
detection into net.h
* Add quicky function to get the port out of either a sockaddr_in
or sockaddr_in6, saving a bunch of code in the oob.
* Update TCP oob and btl with new interface
This commit was SVN r14679.
NOTE: if visibility is enabled "make check" will fail
This commit was SVN r14668.
The following SVN revision numbers were found above:
r14667 --> open-mpi/ompi@1f526a95e9
without any context so we need to save a context somewhere so it can be
retrieved given only buffer pointer. This patch saves context (pointer to
frag) just before start of a buffer so it can be be easily retrieved.
This commit was SVN r14664.
The following SVN revision numbers were found above:
r13921 --> open-mpi/ompi@90fb58de4f
* Require Autoconf 2.60 or higher and remove some cruft
required for AC 2.59 or the AC 2.59 / AC 2.60 mix
* Remove a bunch of now unnecessary AC_SUBST calls
* Use the libtool-provided variables for the -I and
library to use when compiling against ltdl
Fixes trac:1000
This commit was SVN r14652.
The following Trac tickets were found above:
Ticket 1000 --> https://svn.open-mpi.org/trac/ompi/ticket/1000
