finally brings in functionality that is already on the 1.2 branch, and
was developed and tested in the v1.2ofed branch (and other places).
Short version of new features:
* Support for ibv_fork_init()
* Automatically fill in the openib BTL bandwidth value by
querying the HCA port
* Installdirs functionality
* Fixes to always use -I in the Fortran wrapper compilers (#924)
* Gleb's mpool updates
* Remove some kruft in btl/openib/configure.m4, therefore
fixing the harmless warnings noted in #665
* Bunches of updates to the Linux RPM spec file
I.e., effectively the same thing that r14411 brought to the v1.2
branch.
Also effectively brought in r14432 and r14433 (some fixes on top of
the original r14411 commit to v1.2). Still need to bring in the moral
equivalent of r14445 after this commit (fixes to installdirs).
This commit was SVN r14449.
The following SVN revision numbers were found above:
r14411 --> open-mpi/ompi@83b31314ae
r14432 --> open-mpi/ompi@a48f160595
r14433 --> open-mpi/ompi@68f346d2bc
r14445 --> open-mpi/ompi@13d366b827
Fix for memory corruption in the restarted process stack. This stemed from
the brute force method we were previously using. This commit fixes this by
using a lighter weight solution focused in the r2 BML instead of above the PML.
This is a more efficient and flexible solution, and it solves the original
problem.
In the process I pulled out the ft_event function in the tcp BTL and r2 BML
into a set of *_ft.[c|h] files just to keep any updates to these code paths
as isolated as possible to make merging easier on everyone.
This commit was SVN r14371.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
The following Trac tickets were found above:
Ticket 977 --> https://svn.open-mpi.org/trac/ompi/ticket/977
- Add signal handler BLCR register (helps with debugging)
- ifdef out the cr_request_file section for checkpointing self.
There is a bug with the 0.4.2 version of BLCR such that this
does not handle moving checkpoint files around.
I'm following up with the BLCR folks on this one (and checking
the newest release).
This commit was SVN r14069.
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
the same time, remove some of the MPI-related options from OPAL:
- provide mechanism to change at runtime whether sched_yield() should
be called when the progress engine is idle
- provide mechanism for changing the rate at which the event engine
is called when there are "no" users of the event engine (ie, when
using MPI but not TCP)
- fix some function names in the progress engine to better match
their intended use (and remove MPI naming scheme)
- remove progress_mpi_enable / progress_mpi_disable because
we can now use the functions to set the sched_yield and
tick rate interfaces
- rename opal_progress_events() to opal_progress_set_event_flag()
because the first really isn't descriptive of what the function
does and I always got confused by it
This commit was SVN r12645.
* Make sure to AC_SUBST the backtrace CFLAGS so that the right flags
are passed to the component (especially -m64)
* Properly open / close the component. This isn't strictly necessary
to fix the bug, but was an oversight that should be fixed.
This commit was SVN r11806.
The following Trac tickets were found above:
Ticket 405 --> https://svn.open-mpi.org/trac/ompi/ticket/405
The same treatement will happens on all sub-projects. The .h files
have to be C++ compatibles and all symbols with an external visibility
have to get the {PROJECT}_DECLSPEC in front of the prototype.
This commit was SVN r11340.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
did pre-libevent update. The problem is that the behavior of
OPAL_EVLOOP_ONCE was changed by the OMPI team, which them broke things
during the update, so it had to be reverted to the old meaning of
loop until one event occurs. OPAL_EVLOOP_ONELOOP will go through the
event loop once (like EVLOOP_NONBLOCK) but will pause in the event
library for a bit (like EVLOOP_ONCE).
fixes trac:234
This commit was SVN r11081.
The following Trac tickets were found above:
Ticket 234 --> https://svn.open-mpi.org/trac/ompi/ticket/234
- initial support for gm progress thread
- corrected threading issue in pml
- added polling progress for a configurable number of cycles to wait for threaded case
This commit was SVN r9188.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
r8698), with changes below:
- Split wrapper flags into those required for each of the three projects,
and cleaned up some cruft (including the LIBMPI_EXTRA_*FLAGS) through-
out the build system
- Added opal_init_util and opal_finalize_util to allow init / cleanup
of all the opal code that doesn't require the MCA system
- Create standalone key=value file parser, based on the one that used
to be in the mca param parser, so that it can be shared in multiple
places
- Add wrapper datafiles for opal, orte, and ompi wrappers, and add
wrapper compiler with support for all the old features
This commit was SVN r8699.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r8690
r8698
When compiling C++ code that includes something that looks for the C++
header file "memory" (stupid C++ headers not having .h extensions), it
goes through the header file search path, which includes $(topsrcdir)/opal,
so it finds the directory $(topsrcdir)/opal/memory/ and tries to load
that as the memory header file and all goes downhill.
This commit was SVN r8111.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
Some of the functions in opal_init are void or return a bool (opal_output_init, but always returns true.. eh?), so I don't check them.
This commit was SVN r7638.
really can't. Test for munmap, since it's the most likely to cause problems,
since it's always an interposed symbol.
The condition that usually causes problems is if libmpi was brought in as
the result of a library dependency, rather than as a -l on the link line.
The linker in this case will find malloc/free/munmap/etc. in libc, rather
than in libmpi.
This commit was SVN r7508.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
tree.
- fix up #include's throughout the tree (yay contrib/search_replace.pl!)
- remove a few extraneous #include's
- remove orte_sys_info*() from opal_init()/opal_finalize() (it's
already in orte_init_stage1() and orte_system_finalize())
- remove dependencies in opal on orte_system_info -- util/os_path.c
and util/os_create_dirpath.c (they only used path_sep, anyway --
easily changed to #defines)
This commit was SVN r7059.
