It's not possible to combine two shared libraries on Windows, so we have to do it a bit different. First generate a small event static library by just linking the object files, and link it into other libraries that needs the libevent API.
This commit was SVN r24039.
Note: the ompi_check_libfca.m4 file had to be modified to avoid it stomping on global CPPFLAGS and the like. The file was also relocated to the ompi/config directory as it pertains solely to an ompi-layer component.
Forgive the mid-day configure change, but I know Shiqing is working the windows issues and don't want to cause him unnecessary redo work.
This commit was SVN r23966.
Setup the event API to support multiple bases in preparation for splitting the OMPI and ORTE events. Holding here pending shared memory resolution.
This commit was SVN r23943.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
In CMake 2.6 and earlier, this function add dependencies for targets and also link the target libraries automatically, but in CMake 2.8,this behavior has been changed, i.e. it will only add the dependencies but no link, which will cause linking errors at compilation time.
This commit was SVN r22405.
friends also receive &argc and &argv (George asked Jeff to Ralph to
review before committing). The thought is that passing argv and argc
to opal/orte_init be useful to other projects outside of OMPI that are
using OPAL and/or ORTE (especially in conjunction with some other
bootstrapping code where it is helpful to modify argv). It's such a
small thing that it's easy to apply here to make others' lives a
little easier.
Ask George for more details; I'm just the messenger. :-)
Judging by the copyrights on this patch, it's been around for a
while. :-)
This commit was SVN r22260.
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
several header files (previously included by header-files)
now have to be moved "upward".
This is mainly system headers such as string.h, stdio.h and for
networking, but also some orte headers.
This commit was SVN r21095.
generate mangled windex files. Made ompi-top.1 and ompi-iof.1 build
by default. Also, added the orte-top synonym to the ompi-top manpage.
This commit was SVN r20915.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
* Make the creation of the build dir for the man pages a bit more
robust (thanks to suggestions from Ralf W.).
* Only distribute the .Xin files, not the .X man pages themselves.
* Make the .X files depend on opal_config.h so that if you re-run
configure and change opal_config.h (e.g., a new version), the man
pages should get rebuilt.
* Man pages are now cleaned with "distclean", not "maintainer-clean".
* Fix a typo in opal_crs.7in.
* Udpate make_dist_tarball to update "date" in the VERSION file.
* Make make_dist_tarball a bit friendlier to hg checkouts.
This commit was SVN r19219.
versions, dates and build names.
Fixes trac:1387
Big thanks to Jeff and Brian for help and oversight.
This commit was SVN r19120.
The following Trac tickets were found above:
Ticket 1387 --> https://svn.open-mpi.org/trac/ompi/ticket/1387
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.
This commit was SVN r18664.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
{{{
svn merge -r 18218:18240 https://svn.open-mpi.org/svn/ompi/tmp/jjh-scratch .
}}}
Contains:
* Primarily a fix for a user reported problem where a cached file descriptor is causing a SIGPIPE on restart.
* Cleanup some small memory leaks from using mca_base_param_env_var() - Thanks Jeff
* Cleanup ORTE FT tool compilation in non-FT builds - Thanks Tim P.
* Cleanup mpi interface with missplaced {{{OPAL_CR_ENTER_LIBRARY}}} - Thanks Terry
* Some other sundry cleanup items all dealing with C/R functionality in the trunk.
This commit was SVN r18241.
Fix the ompi-server -h cmd line option so it actually tells you something!
Add two new testing codes to the orte/test/mpi area: accept and connect.
This commit was SVN r18176.
some cleanups and standardizations in the various */tools/*/
Makefile.am files. This commit:
* Somewhat simplify the tool Makefile.am's
* Makes the tool Makefile.am's consistent with each other (do similar
actions in similar ways)
* Update the tool Makefile.am's to remove old kruft that was required
by older versions of AM (trunk requires AM >=1.10)
This commit was SVN r17921.