The segv was caused by the fact that we don't really know which daemon failed to start (at least, in most cases), so we didn't set a pointer to the aborted proc object. All we really wanted, though, was to ensure that mpirun returned a non-zero exit status, so the fix was to simply return the default error status.
This commit was SVN r19754.
Cleanup when an orted actually opens the PLM. Unfortunately, some unmentionable people are pushing head node environs out to remote nodes, causing the daemons to think they are the HNP. This helps prevent the confusion.
This commit was SVN r19518.
Add a new job state to indicate that we never attempted to launch. Flag such a scenario and avoid hitting all the other error messages.
This commit was SVN r19366.
Provide support for four MPIR extensions that allow specification of debugger daemon executable, argv for the debugger daemon, whether or not to forward debugger daemon IO, and whether or not debugger daemon will piggy-back on ORTE OOB network. Last is not yet implemented.
No change in behavior or operation occurs unless (a) the debugger specifically utilizes the extensions and, for co-locate while running, the user specifically enables the capability via an MCA param. Two of the MPIR extensions supported here are used in a widely-used debugger for a large-scale installation. The other two extensions are new and being utilized in prototype work by several debuggers for possible future release.
This commit was SVN r19275.
This needs some soak time to ensure we haven't opened any race conditions. I tried to loop everything in the shutdown procedure through that trigger event call to ensure it all goes through the one-time locks as it did before so that someone hitting ctrl-c when we are already shutting down shouldn't cause problems. Just want to let people use it for awhile to verify.
This commit was SVN r19159.
Standardize the handling of the orte launch agent option across PLMs. This has been a consistent complaint I have received - each PLM would register its own MCA param to get input on the launch agent for remote nodes (in fact, one or two didn't, but most did). This would then get handled in various and contradictory ways.
Some PLMs would accept only a one-word input. Others accepted multi-word args such as "valgrind orted", but then some would error by putting any prefix specified on the cmd line in front of the incorrect argument.
For example, while using the rsh launcher, if you specified "valgrind orted" as your launch agent and had "--prefix foo" on you cmd line, you would attempt to execute "ssh foo/valgrind orted" - which obviously wouldn't work.
This was all -very- confusing to users, who had to know which PLM was being used so they could even set the right mca param in the first place! And since we don't warn about non-recognized or non-used mca params, half of the time they would wind up not doing what they thought they were telling us to do.
To solve this problem, we did the following:
1. removed all mca params from the individual plms for the launch agent
2. added a new mca param "orte_launch_agent" for this purpose. To further simplify for users, this comes with a new cmd line option "--launch-agent" that can take a multi-word string argument. The value of the param defaults to "orted".
3. added a PLM base function that processes the orte_launch_agent value and adds the contents to a provided argv array. This can subsequently be harvested at-will to handle multi-word values
4. modified the PLMs to use this new function. All the PLMs except for the rsh PLM required very minor change - just called the function and moved on. The rsh PLM required much larger changes as - because of the rsh/ssh cmd line limitations - we had to correctly prepend any provided prefix to the correct argv entry.
5. added a new opal_argv_join_range function that allows the caller to "join" argv entries between two specified indices
Please let me know of any problems. I tried to make this as clean as possible, but cannot compile all PLMs to ensure all is correct.
This commit was SVN r19097.
Ensure that routes to remote procs are set on the HNP before completing launch so that the debugger message can be sent. Solves a race condition that can exist in those environments where the HNP does not have local procs.
This commit was SVN r18674.
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.
This commit was SVN r18664.
This commit repairs the debugger initialization procedure. I am not closing the ticket, however, pending Jeff's review of how it interfaces to the ompi_debugger code he implemented. There were duplicate symbols being created in that code, but not used anywhere. I replaced them with the ORTE-created symbols instead. However, since they aren't used anywhere, I have no way of checking to ensure I didn't break something.
So the ticket can be checked by Jeff when he returns from vacation... :-)
This commit was SVN r18625.
The following Trac tickets were found above:
Ticket 1255 --> https://svn.open-mpi.org/trac/ompi/ticket/1255
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
Add a new function to opal_progress that tells us our recursion depth to support that solution.
Yes, I know this sounds picky, but good ol' Jeff managed to make it happen by driving his cluster near to death...
Also ensure that we declare "failed" for the daemon job when daemons fail instead of the application job. This is important so that orte knows that it cannot use xcast to tell daemons to "exit", nor should it expect all daemons to respond. Otherwise, it is possible to hang.
After lots of testing, decide to default (again) to slurm detecting failed orteds. This proved necessary to avoid rather annoying hangs that were difficult to recover from. There are conditions where slurm will fail to launch all daemons (slurm folks are working on it), and yet again, good ol' Jeff managed to find both of them.
Thanks you Jeff! :-/
This commit was SVN r18611.
Also detect orted failed-to-start by setting timeout on launch. Currently only used in TM launcher.
Neither detection is enabled by default, but are only active if heartrate is set and/or launch timeout is set. Exception for SLURM as orted failure is always detected and reported.
More info to come on devel list.
This commit was SVN r18555.
1. it depends upon the ability of the native environment to alert us that the orted has died/failed to start. I have included that support for SLURM, but other environments need to be done.
2. for some yet-to-be-determined reason, the message that tells the remaining daemons to "die" isn't getting out of the RML, even though no obvious blockage is standing in the way. Work will continue on resolving that problem. For now, the orteds appear to be exiting on their own quite nicely when they see their HNP "lifeline" disappear.
This represents the best-available fix for ticket #221 so I am closing that ticket at this time.
This commit was SVN r18536.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
Make it all work with comm_spawn in the case of all procs on previously occupied nodes, some new procs on new nodes, and mixtures of the two.
Note: comm_spawn now works with both binomial and linear routed modules. There remains a problem of spawned procs not properly getting updated contact info for the parent proc when run in the direct routed mode...but that's for another day.
This commit was SVN r18385.
If no AMCA parameters are passed then do not send across the path information. Only place it on the command line if the AMCA parameter is set.
This commit was SVN r18382.
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php
{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}
Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.
Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.
This commit was SVN r18381.
Modify grpcomm xcast so it now uses the selected routed module - eliminates cross-wiring of xcast and routing paths. Suboptimal at the moment, but better implementation is on its way.
Cleanup ignore properties on the new routed components.
This commit was SVN r18377.
Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs.
Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node.
This commit was SVN r18338.
Restore the "do-not-launch" functionality so users can test a mapping without launching it.
Add a "do-not-resolve" cmd line flag to mpirun so the opal/util/if.c code does not attempt to resolve network addresses, thus enabling a user to test a hostfile mapping without hanging on network resolve requests.
Add a function to hostfile to generate an ordered list of host names from a hostfile
This commit was SVN r18190.
Add the daemon map capability to the ODLS to create and save a map of daemon vpid vs nodename from the launch message.
Cleanup a few places in the base plm launch support where we didn't adequately protect rml recv's from potentially executing sends.
This commit was SVN r18143.
Specifically, add two new APIs:
1. lost_route: allows the OOB to report that a connection has failed, thereby giving the routed module an opportunity to respond appropriately to its topology. Creating the API also allows each routed component to hold its own definition of "lifeline" - in some cases, this may be a single connection, but in others it may be multiple connections. Some modules may choose to re-route messaging if the lifeline or any other connection is lost, while others may choose to abort the job.
Both the tree and unity modules retain the current behavior and abort the job if the lifeline connection is lost, while ignoring other lost connections.
2. get_wireup_info: returns (in a provided buffer) info required to wireup connections for the specified job. Some routed modules do not need to return any info as they can wireup via alternative means, while some need to xchg data with their peers. If info is inserted into the buffer, the plm_base_launch_apps function will xcast the contents to the specified job.
The commit also removes the "lifeline" entry from the orte_process_info struct (and the associated ORTE_PROC_MY_LIFELINE definition) as the lifeline info is now contained within the respective routed module.
This commit was SVN r17969.
Clarify the setting of send_first in the mpi bindings (trivial, i know, but helpful)
Remove the extra xcast of child contact info to the parent job.
This commit was SVN r17952.
Only one place used the user name field - session_dir, when formulating the name of the top-level directory. Accordingly, the code for getting the user's id has been moved to the session_dir code.
This commit was SVN r17926.
Fix race conditions in abnormal terminations. We had done a first-cut at this in a prior commit. However, the window remained partially open due to the fact that the HNP has multiple paths leading to orte_finalize. Most of our frameworks don't care if they are finalized more than once, but one of them does, which meant we segfaulted if orte_finalize got called more than once. Besides, we really shouldn't be doing that anyway.
So we now introduce a set of atomic locks that prevent us from multiply calling abort, attempting to call orte_finalize, etc. My initial tests indicate this is working cleanly, but since it is a race condition issue, more testing will have to be done before we know for sure that this problem has been licked.
Also, some updates relevant to the tool comm library snuck in here. Since those also touched the orted code (as did the prior changes), I didn't want to attempt to separate them out - besides, they are coming in soon anyway. More on them later as that functionality approaches completion.
This commit was SVN r17843.
Comm_spawn was sticking during spawn_multiple because of a problem in the dpm - the modex there is asking processes to talk to each other in an allgather_list operation, but the procs don't have the required contact info to do so. The solution here was to ensure that all parent procs have full contact info for procs in the child job.
Admittedly, this isn't the long-term answer. We would like to have the contact info given to only the parent procs that were involved in the comm_spawn. There is a way to do that, but this will suffice to keep things working until that can be implemented and tested.
This commit was SVN r17772.
