Simplify selection of the address to publish for a given BTL TCP
module in the module exchange code. Rather than looping through
all IP addresses associated with a node, looking for one that
matches the kindex of a module, loop over the modules and
use the address stored in the module structure. This also
happens to be the address that the source will use to bind()
in a connect() call, so this should eliminate any confusion
(read: bugs) when an interface has multiple IPs associated with
it.
Refs #5818
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Today, a btl tcp module is associated with exactly one IP
address (IPv4 or IPv6). There's no need to reserve space
for both an IPv4 and IPv6 address in the module structure,
since the module will only be associated with one or the
other.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Work around a race condition in the TCP BTL's proc setup code.
The Cisco MTT results have been failing on TCP tests due to a
"dropped connection" message some percentage of the time.
Some digging shows that the issue happens in a combination of
multiple NICs and multiple threads. The race is detailed in
https://github.com/open-mpi/ompi/issues/3035#issuecomment-429500032.
This patch doesn't fix the race, but avoids it by forcing
the MPI layer to complete all calls to add_procs across the
entire job before any process leaves MPI_INIT. It also
reduces the scalability of the TCP BTL by increasing start-up
time, but better than hanging.
The long term fix is to do all endpoint setup in the first
call to add_procs for a given remote proc, removing the
race. THis patch is a work around until that patch can
be developed.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
This commit fixes a deadlock that can occur when using a TL that
supports the connect to endpoint model. The deadlock was occurring
while processing an incoming connection requests. This was done from
an active-message callback. For some unknown reason (at this time)
this callback was sometimes hanging. To avoid the issue the connection
active-message is saved for later processing.
At the same time I cleaned up the connection code to eliminate
duplicate messages when possible.
This commit also fixes some bugs in the active-message send path:
- Correctly set all fragment fields in prepare_src.
- Fix bug when using buffered-send. We were not reading the return
code correctly (which is in bytes). This resulted in a message
getting sent multiple times.
- Don't try to progress sends from the btl_send function when in an
active-message callback. It could lead to deep recursion and an
eventual crash if we get a trace like
send->progress->am_complete->ob1_callback->send->am_complete...
Closes#5820Closes#5821
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This reverts commit 6acebc40a1.
This patch is causing numerous "Socket closed" messages which are
causing most of the failures on Cisco's MTT run. See
https://github.com/open-mpi/ompi/issues/5849 for more information.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Looks like a filename was missed when pmix sucked in the installdirs
framework. Fixing the typo fixes "make ctags" and "make cscope".
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
It is apparently possible for different instances of the same UCT
transport to have different limits (max short put for example). To
account for this we need to store the attributes per TL context not
per TL. This commit fixes the issue.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
While trying to debug #3035, it's not clear whether there is
an issue with the modex data or printing the address list.
Print the number of endpoints on the error, which will help
determine which case is happening to Cisco.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
When creating TCP BTL modules, print more information about the
module's ethernet association, including the first address associated
with the device, as debug output.
Fix a flipped output string for IPv4 and IPv6 addresses in the
modex send code.
Add the addresses being published in the modex to the debugging
output in modex send, to help match failures in endpoint match.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
This commit updates the uct btl to change the transports parameter
into a priority list. The dc_mlx5, rc_mlx5, and ud transports to the
priority list. This will give better out of the box performance for
multi-threaded codes beacuse the *_mlx5 transports can avoid the mlx5
lock inside libmlx5_rdmav2.
This commit also fixes a number of leaks and a possible deadlock when
using RDMA.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The Open MPI code base assumed that asprintf always behaved like
the FreeBSD variant, where ptr is set to NULL on error. However,
the C standard (and Linux) only guarantee that the return code will
be -1 on error and leave ptr undefined. Rather than fix all the
usage in the code, we use opal_asprintf() wrapper instead, which
guarantees the BSD-like behavior of ptr always being set to NULL.
In addition to being correct, this will fix many, many warnings
in the Open MPI code base.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
If we are using the internal PMIx component and the embedded library fails to configure, then fail - don't silently fail to build and then fail in execution
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
We only need to pass a custom range if the target is a single process.
Otherwise, we let the range be "session".
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
This commit works around an Oracle C compiler bug in 5.15 (not sure
when it was introduced). The bug is triggered when we chain
assignments of atomic variables. Ex:
_Atomic intptr x, y;
intptr_t z = 0;
x = y = z;
Will produce a compiler error of the form:
operand cannot have void type: op "="
assignment type mismatch:
long "=" void
To work around the issue we are removing the chain assignment and
setting the head and tail on different lines.
Fixes#5814
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
On some platfoms reading a 64-bit value is non-atomic and it is
possible that the two 32-bit values are read in the wrong order. To
ensure the tag is always read first this commit reads the tag before
reading the full 64-bit value.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Remove the pack/unpack pragma around net/if.h on MacOS, which
was added to fix a bug in MacOS X 10.4.x on 64-bit platforms.
The bug was fixed in Mac OS X 10.5.0 and, sometime in the last
11 years, compilers started emitting warnings about the fact
that the Apple header stomped over the pragma pack settings
from the workaround. We already don't support versions of MacOS
earlier than 10.5, so there's no point in keeping the workaround.
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Open MPI doesn't support any transports on MacOS which require
memory manager hooks. The memory patcher component uses the
syscall interface, which has been deprecated in recent versions
of MacOS. Since we don't need it and it emits warnings about
deprecation, disable the memory patcher component on MacOS.
Fixes#5671
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
Get Brian's patch from #5825 and his log message:
Fix a failure in binding the initiating side of a connection
on MacOS. MacOS doesn't like passing the size of the storage
structure (sockaddr_storage) instead of the expected size of
the structure (sockaddr_in or sockaddr_in6), which was causing
bind() failures. This patch simply changes the structure size
to the expected size.
Add a more clear error message in debug mode.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
Per
https://github.com/open-mpi/ompi/issues/3035#issuecomment-426085673,
it looks like the IP address for a given interface is being stashed in
two places: on the endpoint and on the module.
1. On the endpoint, it is storing the moral equivalent of a
(struct sockaddr_in.sin_addr).
2. On the module, it is storing a full (struct sockaddr_storage).
The call to opal_net_get_hostname() expects a full (struct sockaddr*)
-- not just the stripped-down (struct sockaddr_in.sin_addr). Hence,
when the original code was passing in the endpoint's (struct
sockaddr_in.sin_addr) and opal_net_get_hostname() was treating it
like a (struct sockaddr), hilarity ensued (i.e., we got the wrong
output).
This commit eliminates the call to opal_net_get_hostname() and just
calls inet_ntop() directly to convert the (struct
sockaddr_in.sin_addr) to a string.
NOTE: Per the github comment cited above, there can be a disparity
between the IP address cached on the endpoint vs. the IP address
cached on the module. This only happens with interfaces that have
more than one IP address. This commit does not fix that issue.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
In many cases, this was a simple string replace. In a few places, it
entailed:
1. Updating some comments and removing now-redundant foo[size-1]='\0'
statements.
2. Updating passing (size-1) to (size) (because opal_string_copy()
wants the entire destination buffer length).
This commit actually fixes a bunch of potential (yet quite unlikely)
bugs where we could have ended up with non-null-terminated strings.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Fix the test that determined whether we output "writeable" or
"read-only" for MCA vars (it was checking the wrong flag).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Disable async receive for CUDA under OpenIB. While a performance
optimization, it also causes incorrect results for transfers
larger than the GPUDirect RDMA limit. This change has been validated
and approved by Akshay.
References #3972
Signed-off-by: Brian Barrett <bbarrett@amazon.com>
This can be returned when running on QEMU user-mode emulation,
which does not support getsockopt with SO_RCVTIMEO.
Signed-off-by: Michael Kuron <mkuron@icp.uni-stuttgart.de>
This commit updates the entire codebase to use specific opal types for
all atomic variables. This is a change from the prior atomic support
which required the use of the volatile keyword. This is the first step
towards implementing support for C11 atomics as that interface
requires the use of types declared with the _Atomic keyword.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
