ports/openmpi
ports/openmpi
1
1
Форкнуть 0
Код Релизы Активность
17 156 коммитов 3 Ветки 0 Теги 130 MiB
44bd855717
Граф коммитов

3880 Коммитов

Автор SHA1 Сообщение Дата
Ralph Castain
44bd855717 Silence warnings 
This commit was SVN r26808.
 2012-07-19 14:29:32 +00:00
Vasily Filipov
597a422272 MTL: make MXM work with read (in blocking send case) call-backs. 
This commit was SVN r26807.
 2012-07-19 13:28:06 +00:00
Nathan Hjelm
610be870f9 btl/openib: limit each process to a ppn fraction of the available registered memory when using mellanox hardware (mlx4 and mthca) 
This commit was SVN r26804.
 2012-07-18 17:29:48 +00:00
Nathan Hjelm
4a97ecbdd2 btl/openib: remove tab characters 
This commit was SVN r26803.
 2012-07-18 17:29:37 +00:00
Eugene Loh
a3e02fdaff With non-blocking collectives, a "round schedule" could fall on any address 
alignment, which typically causes problems on SPARC.  Further, the pointer
manipulation to access elements in a round schedule was clumsy.  This change
introduces macros to facilitate addressing and make it more portable.

This commit was SVN r26802.
 2012-07-18 17:08:24 +00:00
Nathan Hjelm
771b427027 udcm: unmonitor the fd BEFORE tearing down the listen qp 
This commit was SVN r26800.
 2012-07-18 14:22:45 +00:00
Nathan Hjelm
35de50b823 remove the elan btl 
This commit was SVN r26798.
 2012-07-17 14:51:41 +00:00
Nathan Hjelm
fc1b295606 udcm: evict from the lru of the openib device's grdma mpool if a qp can not be created. Note: there doesn't appear to be a standard way to differentiate between ibv_create_qp failing because the node is out of registered memory and failing because no more qps are available 
This commit was SVN r26797.
 2012-07-14 01:58:29 +00:00
Nathan Hjelm
3798f38386 do not print out an error message if ibv_reg_mr fails 
This commit was SVN r26796.
 2012-07-14 01:35:45 +00:00
Abhishek Kulkarni
1878f276cd Replace the pattern while(flag) { opal_progress() }; in the C/R code 
with the ORTE_WAIT_FOR_COMPLETION macro.

This commit was SVN r26794.
 2012-07-13 23:31:56 +00:00
Nathan Hjelm
4d1920ee87 Fix a bug on 32-bit systems introduced by r26626. This fix ensures that all supported btls (with exception of wv-- shiqing will need to help bring that one up to date with r26626) set the lval in prepare_src/dst when preparing a put or get segment. This fix also ensures a consistent use of lval in put and get for both local and remote segments. 
This commit was SVN r26793.

The following SVN revision numbers were found above:
  r26626 --> open-mpi/ompi@249066e06d
 2012-07-13 21:19:16 +00:00
Nathan Hjelm
344fe61616 remove assertion in udcm 
This commit was SVN r26790.
 2012-07-13 15:14:48 +00:00
Jeff Squyres
e719d6ab78 It turns out that "sppp" on the Oracle Mx000 series of servers (where x = 
{3, 4, 5, 9}, SPARC VI-based machines) is not a 127.x.y.z interface,
so it needs to stay in the exclude list.

This commit was SVN r26789.
 2012-07-13 12:11:41 +00:00
Jeff Squyres
196bc0a53e Update the TCP BTL MCA param btl_tcp_if_exclude default value to use 
CIDR notation 127.0.0.1/8 to ignore localhost devices instead of the
imprecise (and not always correct!) "lo,sppp".

This commit was SVN r26788.
 2012-07-12 15:13:08 +00:00
Edgar Gabriel
92271c571d set the status field for collective read and write operations. 
This commit was SVN r26786.
 2012-07-12 10:26:27 +00:00
Nathan Hjelm
b79a61a360 move btl_vader.c to btl_vader_module.c 
This commit was SVN r26785.
 2012-07-11 20:14:19 +00:00
Terry Dontje
6f3195faca add some missing casts 
This commit was SVN r26779.
 2012-07-10 18:03:29 +00:00
Nathan Hjelm
05c5c1f412 remove unused i_initiate function from udcm 
This commit was SVN r26778.
 2012-07-10 17:22:19 +00:00
Jeff Squyres
bb13e21538 Roll back r26730, but bump the default CQ length base up to 1500, not 
1000.  Refs trac:3154.

IB/iWarp vendors need to get together to figure out a real fix.

This commit was SVN r26777.

The following SVN revision numbers were found above:
  r26730 --> open-mpi/ompi@5315c91baf

The following Trac tickets were found above:
  Ticket 3154 --> https://svn.open-mpi.org/trac/ompi/ticket/3154
 2012-07-10 16:53:27 +00:00
Nathan Hjelm
4c0c937953 Remove use of ompi_ptr_ltop in BTLs. This fixes a crash seen on big-endian 32-bit platforms with MPI one-sided. 
This commit was SVN r26776.
 2012-07-10 16:18:53 +00:00
George Bosilca
7d6006a5a6 Fix various compiler warnings. 
This commit was SVN r26774.
 2012-07-10 15:57:15 +00:00
Abhishek Kulkarni
2ca8292f46 Fix a typo in the sm btl (related to CMA support). 
This commit was SVN r26772.
 2012-07-10 00:12:05 +00:00
Abhishek Kulkarni
5c58a1c9c1 Fix C/R support in the trunk. 
Among other things, this patch deals with the following issues:
* fix ompi-checkpoint argument parsing
* ompi-restart -showme prints an extraneous "Restarted child with PID" 
  message. Move around the debug statement to avoid this.
* fixes for the state machine changes

This commit was SVN r26770.
 2012-07-09 23:34:13 +00:00
Terry Dontje
43314776ae add cast to correct a type mismatch warning 
This commit was SVN r26767.
 2012-07-09 18:32:39 +00:00
Edgar Gabriel
d18dad7109 remove the file io_ompio_coll_offset. These routines were the predecessors of 
the routines in io_ompio_coll_array. No need to keep both versions around.

This commit was SVN r26766.
 2012-07-09 17:12:46 +00:00
Edgar Gabriel
8ae22cacc1 - remove two functions that were not used anymore 
- change the location where we mark the file view as contiguous and the
  condition on how it is determined to be contiguous
- remove the unnecessary include statements

This commit was SVN r26763.
 2012-07-08 12:57:17 +00:00
George Bosilca
46e808c940 Release the lock a little later. 
This commit was SVN r26762.
 2012-07-08 12:57:00 +00:00
George Bosilca
ee1410a8d2 A size_t variable should not start at a negative value. 
This commit was SVN r26761.
 2012-07-08 12:56:33 +00:00
George Bosilca
4326537fe9 Remove compiler warning about uninitialized variable. 
This commit was SVN r26760.
 2012-07-08 00:07:52 +00:00
George Bosilca
57f08ec2c8 Make it compile! 
This commit was SVN r26759.
 2012-07-08 00:06:13 +00:00
Brian Barrett
58413fa1e4 * properly setup communication infrastructure for libnbc. 
* Prevent infinite recursion in progress loop.

Should fix improper barrier eugene was seeing.

This commit was SVN r26758.
 2012-07-06 13:59:03 +00:00
Brian Barrett
e0ceabd486 Need to set MPI_ERROR in the status before calling ompi_request_complete. 
This commit was SVN r26757.
 2012-07-06 01:14:35 +00:00
Brian Barrett
27d45ad550 Implement reduce_scatter_block and ireduce_scatter_block, although possibly 
not nearly as optimal as they should be.

This commit was SVN r26756.
 2012-07-05 22:11:48 +00:00
Terry Dontje
025b42bbb7 corrected the change of pval to lval introduced in r26626 
This commit was SVN r26751.

The following SVN revision numbers were found above:
  r26626 --> open-mpi/ompi@249066e06d
 2012-07-05 13:31:24 +00:00
George Bosilca
ec760454a6 Cleaning ... 
This commit was SVN r26747.
 2012-07-04 21:22:13 +00:00
George Bosilca
63278df92d Prevent the coll SM from looking for information about remote procs 
during the init phase. This information is only available at a 
later stage.

This commit was SVN r26746.
 2012-07-04 21:15:40 +00:00
Terry Dontje
95a3b4a423 corrected the change of pval to lval introduced in r26626 
This commit was SVN r26732.

The following SVN revision numbers were found above:
  r26626 --> open-mpi/ompi@249066e06d
 2012-07-03 18:52:18 +00:00
Terry Dontje
1895ca2bc4 corrected a typo (lval instead of pval) introduced in r26626 
This commit was SVN r26731.

The following SVN revision numbers were found above:
  r26626 --> open-mpi/ompi@249066e06d
 2012-07-03 17:46:43 +00:00
Jeff Squyres
5315c91baf Fixes trac:3152: slightly more advanced than the patch on the ticket: 
* If the MCA param btl_openib_cq_size is set to 0 (which is the
   default), use the device CQ max size. Otherwise, use the MCA param
   value (and never adjust it again).
 * Remove the CQ size adjustment code. Since we default to max CQ
   size, there really isn't much point in having it any more. I think
   people setting an absolute CQ size is going to be rare, so let's
   not do anything fancy with it.
 * If the MCA param value is larger than what the device supports,
   print a warning (only once per process) and default to using the
   device max
 * Add a BTL_VERBOSE displaying which CQ size we used

This commit was SVN r26730.

The following Trac tickets were found above:
  Ticket 3152 --> https://svn.open-mpi.org/trac/ompi/ticket/3152
 2012-07-03 16:49:59 +00:00
Nathan Hjelm
9f3717959e remove sync step from udcm as it really isn't necessary 
This commit was SVN r26724.
 2012-07-02 22:54:44 +00:00
Brian Barrett
d56de80b5d * Properly initialize handle variable as a request (since the coll_libnbc_request contains everything an NBC_Handle used to contain). Not sure how this slipped through... 
This commit was SVN r26710.
 2012-07-02 16:39:42 +00:00
Brian Barrett
7e67bfa175 Use OMPI's ops instead of the libnbc ops. 
This commit was SVN r26708.
 2012-07-02 15:47:22 +00:00
Pavel Shamis
f7664b3814 1. Adding 2 new components: 
ofacm - generic connection manager for IB interconnects.
ofautils - IB common utilities and compatibility code

2. Updating OpenIB configure code

- ORNL & Mellanox Teams 

This commit was SVN r26707.
 2012-07-02 15:20:12 +00:00
Yevgeny Kliteynik
0e28fa984b Remove dead code that was related to ticket #2971 
This commit was SVN r26701.
 2012-07-02 11:19:09 +00:00
Nathan Hjelm
a847df9ba5 ugni: fix eager get 
This commit was SVN r26699.
 2012-06-29 15:43:29 +00:00
Jeff Squyres
5d030278e1 Refs trac:3130: Per comment 8 on the ticket, this MX patch fixes the cases 
where the MX BTL and MTL are stepping on each other regarding the
mpool.  Thanks to Yong Qin for assistance in tracking this down.

This commit was SVN r26698.

The following Trac tickets were found above:
  Ticket 3130 --> https://svn.open-mpi.org/trac/ompi/ticket/3130
 2012-06-29 13:52:40 +00:00
Jeff Squyres
b936229b54 Refs trac:3130: fix the openib BTL to properly set the memalign malloc 
hook early in the setup, but ''not'' during the component register
function.  And then properly unset it if was set.

This commit was SVN r26697.

The following Trac tickets were found above:
  Ticket 3130 --> https://svn.open-mpi.org/trac/ompi/ticket/3130
 2012-06-29 13:51:36 +00:00
Jeff Squyres
f3a8722360 Fix comment. 
This commit was SVN r26696.
 2012-06-29 01:38:04 +00:00
Brian Barrett
0b887ab5a1 * Remove unneeded prototype that was causing compile issues anyway 
* Use proper tag space (the negatives below the blocking communicators)
  instead of the point-to-point space
* Use the PML interface instead of the MPI interface, since the MPI
  interface 1) shouldn't be used by components and 2) doesn't like
  negative tags

This commit was SVN r26693.
 2012-06-28 16:52:03 +00:00
Edgar Gabriel
b0954a6a3e set the internal OMPIO file pointer to the end of the file if file has been 
opened using the APPEND mode.

This commit was SVN r26692.
 2012-06-28 15:15:47 +00:00