Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
Remove the OMPI_PREFIX_ENV environmental variable as that was totally confusing as a way of setting a tmpdir base location.
This commit was SVN r25941.
Detect the addition of fqdn nodes in the allocation. If not found, then strip all incoming hostnames from daemons of any domain info when matching those names against the names in the node pool.
Leave some protection and "live" diagnostic output in place so we can continue to detect problems across all environments.
This commit was SVN r25557.
Turns out, this isn't necessarily true. The Cray, for example, launches processes in a toroidal pattern, thus causing the daemons to wind up somewhere other than what we thought. Other environments (e.g., slurm) are also capable of such behavior, depending upon the default mapping algorithm they are told to use.
Resolve this problem by making the daemon-to-node assignment in the affected environments when the daemon calls back and tells us what node it is on. Order the nodes in the mapping list so they are in daemon-vpid order as opposed to the order in which they show in the allocation. For environments that don't exhibit this mapping behavior (e.g., rsh), this won't have any impact.
Also, clean up the vm launch procedure a little bit so it more closely aligns with the state machine implementation that is coming, and remove some lingering "slave" code.
This commit was SVN r25551.
Brian dealt with this in the past by creating platform files and using "no-build" to block the components. This was clunky, but acceptable when only one organization was using that option. However, that number has now expanded to at least two more locations.
Accordingly, make --without-rte-support actually work by adding appropriate configury to prevent components from building when they shouldn't. While doing so, remove two frameworks (db and rmcast) that are no longer used as ORCM comes to a close (besides, they belonged in ORCM now anyway). Do some minor cleanups along the way.
This commit was SVN r25497.
https://svn.open-mpi.org/trac/ompi/wiki/ProcessPlacement
The wiki page is incomplete at the moment, but I hope to complete it over the next few days. I will provide updates on the devel list. As the wiki page states, the default and most commonly used options remain unchanged (except as noted below). New, esoteric and complex options have been added, but unless you are a true masochist, you are unlikely to use many of them beyond perhaps an initial curiosity-motivated experimentation.
In a nutshell, this commit revamps the map/rank/bind procedure to take into account topology info on the compute nodes. I have, for the most part, preserved the default behaviors, with three notable exceptions:
1. I have at long last bowed my head in submission to the system admin's of managed clusters. For years, they have complained about our default of allowing users to oversubscribe nodes - i.e., to run more processes on a node than allocated slots. Accordingly, I have modified the default behavior: if you are running off of hostfile/dash-host allocated nodes, then the default is to allow oversubscription. If you are running off of RM-allocated nodes, then the default is to NOT allow oversubscription. Flags to override these behaviors are provided, so this only affects the default behavior.
2. both cpus/rank and stride have been removed. The latter was demanded by those who didn't understand the purpose behind it - and I agreed as the users who requested it are no longer using it. The former was removed temporarily pending implementation.
3. vm launch is now the sole method for starting OMPI. It was just too darned hard to maintain multiple launch procedures - maybe someday, provided someone can demonstrate a reason to do so.
As Jeff stated, it is impossible to fully test a change of this size. I have tested it on Linux and Mac, covering all the default and simple options, singletons, and comm_spawn. That said, I'm sure others will find problems, so I'll be watching MTT results until this stabilizes.
This commit was SVN r25476.
ason to return the topology from every daemon. Borrow a page from the --hetero-apps page and let users indicate that the node topology differs by adding a --
hetero-nodes option to mpirun. If the option is set, then every daemon returns topology info. If not set, then only daemon vpid=1 returns it.
We always want one daemon to return the topology as the head node is often different from the compute nodes. Having one daemon return the compute node topolo
gy allows us to detect any such difference. All compute nodes are then set to the same topology.
This commit was SVN r25408.
Don't automatically display the topology for each node when --display-devel-map is set as it can overwhelm the reader. Use a separate flag --display-topo to get it.
This commit was SVN r25396.
Use hwloc to obtain the cpuset for each process during mpi_init, and share that info in the modex. As it arrives, use a new opal_hwloc_base utility function to parse the value against the local proc's cpuset and determine where they overlap. Cache the value in the pmap object as it may be referenced multiple times.
Thus, the return value from orte_ess.proc_get_locality is a 16-bit bitmask that describes the resources being shared with you. This bitmask can be tested using the macros in opal/mca/paffinity/paffinity.h
Locality is available for all procs, whether launched via mpirun or directly with an external launcher such as slurm or aprun.
This commit was SVN r25331.
termination condition is to be checked at the daemon/HNP level not down
in the routing.
This commit was SVN r25313.
The following SVN revision numbers were found above:
r25248 --> open-mpi/ompi@b42ccc89b8
1 otherwise. It was doing the opposite, so this patch fixes the
return values. All uses (all in ORTE) used the actual return values,
not the documented values, so fix them as well.
This commit was SVN r25257.
To enable the epochs and the resilient orte code, use the configure flag:
--enable-resilient-orte
This will define both:
ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE
This commit was SVN r25093.
Over the course of time, usage of static ports got corrupted in several places, the "parent" info got incorrectly reset, etc. So correct all that and get the regex-based wireup going again.
Also, don't pass node lists if static ports aren't enabled - they are of no value to the orted and just create the possibility of overly-long cmd lines.
This commit was SVN r24860.
Everyone will be starting at MIN anyway (until we implement restart of course)
so there's no reason to set the epoch to INVALID and then immediately reset them
to MIN. This way there's less room to make mistakes later.
This commit was SVN r24829.
Rename the memusage sensor plugin to "resusage" as it will soon be updated to include full process stat monitoring.
Extend the heartbeat sensor to report node and process stats in the heartbeat.
Store the process and node stats in their respective orte_xxx_t object.
This commit was SVN r24629.
Provide a new MCA param that allows the user to direct that we abort the job once a process exits with non-zero status. No recovery is allowed in such cases to avoid trying to restart a process that has already exited MPI.
This commit was SVN r24614.
No need for any CMRs to 1.5... that was already done in CMR 2728.
This commit was SVN r24545.
The following SVN revision numbers were found above:
r22841 --> open-mpi/ompi@b400b84162
There was no compelling reason to support such old kernels. Accordingly, convert the test to print a nice error message indicating we no longer support old kernels (but indicate that earlier OMPI versions do) and error out. Remove all code that was protected by "if have different pids" since it can no longer be compiled.
This commit was SVN r24531.
1. removing the enum of mapper values
2. change the req_mapper and last_mapper fields to char* so they can hold the component name instead of a mapper flag
3. revise the selection logic in the mapper components to reflect the change. Components now look for their name in the req_mapper field, or to see if other criteria (e.g., npernode) are set that mandate their doing the mapping
Several MCA params resided in the rmaps base for historical reasons - they have been in the base since at least the original 1.2 release (and perhaps earlier). However, George correctly pointed out that they really should reside in their respective components. Accordingly, move them to the components, but register synonyms to the old names to avoid breaking backward compatibility.
These revisions retain the current functionality of allowing comm_spawn'd jobs to use different mappers than the original job, and for the errmgr to utilize the resilient mapper to recover processes regardless of how they were originally mapped.
Given the large number of possible combinations, I am sure that someone will find a corner-case combination of values and selection criteria that cause either no mapper to be selected, or one other than the intended to be used. No one can test all the ways people will use this system, so I expect debugging to continue for awhile.
The ability of comm_spawn'd jobs to exploit this functionality relies on changes to the orte_dpm component - this will be committed separately.
This commit was SVN r24520.
When called, each mapper checks to see if it can map the job. If npernode is provided, for example, then the loadbalance mapper accepts the assignment and performs the operation - all mappers before it will "pass" as they can't map npernode requests.
Also remove the stale and never completed topo mapper.
This commit was SVN r24393.
Cleanup the heartbeat handling so it is associated with the proc, not a node.
Cleanup handling of recovery options so that defaults do not override user values iff they are provided.
This commit was SVN r24382.
Note: the ompi_check_libfca.m4 file had to be modified to avoid it stomping on global CPPFLAGS and the like. The file was also relocated to the ompi/config directory as it pertains solely to an ompi-layer component.
Forgive the mid-day configure change, but I know Shiqing is working the windows issues and don't want to cause him unnecessary redo work.
This commit was SVN r23966.
Setup the event API to support multiple bases in preparation for splitting the OMPI and ORTE events. Holding here pending shared memory resolution.
This commit was SVN r23943.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.
Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.
Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.
I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:
1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)
2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.
There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.
This commit was SVN r23925.
Here we tried to write out the session directory marker after we sync the directory, which happens early in the case of --stop.
Thanks to Ananda Mudar for noticing the bug.
This commit was SVN r23627.
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php
Documentation:
http://osl.iu.edu/research/ft/
Major Changes:
--------------
* Added C/R-enabled Debugging support.
Enabled with the --enable-crdebug flag. See the following website for more information:
http://osl.iu.edu/research/ft/crdebug/
* Added Stable Storage (SStore) framework for checkpoint storage
* 'central' component does a direct to central storage save
* 'stage' component stages checkpoints to central storage while the application continues execution.
* 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress)
* 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching)
* Added Compression (compress) framework to support
* Add two new ErrMgr recovery policies
* {{{crmig}}} C/R Process Migration
* {{{autor}}} C/R Automatic Recovery
* Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component
* Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option)
* {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342)
* {{{OMPI_CR_Restart}}}
* {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules)
* {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192)
* {{{OMPI_CR_Quiesce_start}}}
* {{{OMPI_CR_Quiesce_checkpoint}}}
* {{{OMPI_CR_Quiesce_end}}}
* {{{OMPI_CR_self_register_checkpoint_callback}}}
* {{{OMPI_CR_self_register_restart_callback}}}
* {{{OMPI_CR_self_register_continue_callback}}}
* The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future.
* Add a progress meter to:
* FileM rsh (filem_rsh_process_meter)
* SnapC full (snapc_full_progress_meter)
* SStore stage (sstore_stage_progress_meter)
* Added 2 new command line options to ompi-restart
* --showme : Display the full command line that would have been exec'ed.
* --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413)
* Deprecated some MCA params:
* crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir
* snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir
* snapc_base_global_shared deprecated, use sstore_stage_global_is_shared
* snapc_base_store_in_place deprecated, replaced with different components of SStore
* snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref
* snapc_base_establish_global_snapshot_dir deprecated, never well supported
* snapc_full_skip_filem deprecated, use sstore_stage_skip_filem
Minor Changes:
--------------
* Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing.
* Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components
* Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it.
* Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}}
* Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set.
* opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality.
* Cleanup the CRS framework and components to work with the SStore framework.
* Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably).
* Add 'quiesce' hook to CRCP for a future enhancement.
* We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}.
* Add optional application level INC callbacks (registered through the CR MPI Ext interface).
* Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive.
* {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked.
* {{{opal-restart}}} also support local decompression before restarting
* {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata
* {{{orte-restart}}} now uses the SStore framework to work with the metadata
* Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality.
* Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}.
* Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped.
* Make sure to decrement the number of 'num_local_procs' in the orted when one goes away.
* odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options.
* Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities.
* Improve the checks for 'already checkpointing' error path.
* A a recovery output timer, to show how long it takes to restart a job
* Do a better job of cleaning up the old session directory on restart.
* Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment)
* Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize.
This commit was SVN r23587.
The following Trac tickets were found above:
Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
orte_local_chip_type and orte_local_chip_model in MPI processes it the
appropriate sysinfo module found the values on the machine.
This commit was SVN r23581.
* Fix a configure warning for checking --enable-ft-thread
* In hnp and orted ErrMgr components check to see if other components have already recovered this process before trying to recover it again.
* Fix 'npernode' for restarting using the resilient rmaps component
* export ompi_info_set, so that internal functionality can use it.
This commit was SVN r23535.
Create an ability to store the contact info for multiple HNPs being used to route between different job families. Modify the dpm orte module to pass the resulting store during the connect_accept procedure so that all jobs involved in the resulting communicator know how to route OOB messages between them.
Add a test provided by Philippe that tests this ability.
This commit was SVN r23438.
The problem was tracked to use of the grpcomm.onesided_barrier to control daemon/mpirun termination. This relied on messaging -and- required that the program counter jump from the errmgr back to grpcomm. On rare occasions, this jump did not occur, causing mpirun to hang.
This patch looks more invasive than it is - most of the affected files simply had one or two lines removed. The essence of the change is:
* pulled the job_complete and quit routines out of orterun and orted_main and put them in a common place
* modified the errmgr to directly call the new routines when termination is detected
* removed the grpcomm.onesided_barrier and its associated RML tag
* add a new "num_routes" API to the routed framework that reports back the number of dependent routes. When route_lost is called, the daemon's list of "children" is checked and adjusted if that route went to a "leaf" in the routing tree
* use connection termination between daemons to track rollup of the daemon tree. Daemons and HNP now terminate once num_routes returns zero
Also picked up in this commit is the addition of a new bool flag to the app_context struct, and increasing the job_control field from 8 to 16 bits. Both trivial.
This commit was SVN r23429.
Since the MPIR symbols are now included in the ORTE library, remove duplicate declarations in OMPI and replace them with extern references to their ORTE instantiations.
This commit was SVN r23360.
Modify the debugger control flag to include "do not monitor" so orterun will not take debugger daemon termination into account when deciding that all jobs are done.
This commit was SVN r23282.
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
back the native error code.
* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
(OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
decode 'ret' to get the native error code.
This commit was SVN r23162.
Add new mca params to test:
orte_debugger_test_daemon: Name of the executable to be used to simulate a debugger colaunch
orte_debugger_test_attach: Test debugger colaunch after debugger attachment
To test co-launch at job start, just set the orte_debugger_test_daemon param.
To test co-launch upon attach:
set orte_debugger_test_daemon
set orte_debugger_test_attach=1
set orte_enable_debug_cospawn_while_running=1
set orte_debugger_check_rate=<N> - defines the number of seconds to wait before "checking" for a debugger attaching
Added a "debugger" program to orte/test/mpi that just spins to simulate a debugger daemon.
This commit was SVN r23144.
1. orte_enable_recovery - default recovery policy, can be overridden on a per-job basis
2. orte_max_local_restarts - default max number of local restarts, can be overridden
3. orte_max_global_restarts - default max number of relocates, can be overridden
Implement the restart_proc API for the ODLS framework, reorganize the default fns a little to avoid copying code.
This commit was SVN r23057.
1. file activity - can monitor file size, access and modification times. If these fail to change over a specified number of sampling iterations (rate is an mca param), then the errmgr is notified.
2. memory usage - checks amount of memory used by a process. Limit and sampling rate can be set.
This support must be enabled by configuring --enable-sensors.
ompi_info and orte-info have been updated to include the new framework.
Also includes some initial steps toward restoring the recovery capability. Most notably, the ODLS API has been extended to include a "restart_proc" entry for restarting a local process, and organizes the various ERRMGR framework globals into a single struct as we do in the other ORTE frameworks. Fix an oversight in the ERRMGR framework where a pointer array was constructed, but not initialized.
Implementation continues.
This commit was SVN r23043.
* add hnp and orted modules to the errmgr framework. The HNP module contains much of the code that was in the errmgr base since that code could only be executed by the HNP anyway.
* update the odls to report process states directly into the active errmgr module, thus removing the need to send messages looped back into the odls cmd processor. Let the active errmgr module decide what to do at various states.
* remove the code to track application state progress from the plm_base_launch_support.c code. Update the plm modules to call the errmgr directly when a launch fails.
* update the plm_base_receive.c code to call the errmgr with state updates from remote daemons
* update the routed modules to reflect that process state is updated in the errmgr
* ensure that the orted's open the errmgr and select their appropriate module
* add new pretty-print utilities to print process and job state. Move the pretty-print of time info to a globally-accessible place
* define a global orte_comm function to send messages from orted's to the HNP so that others can overlay the standard RML methods, if desired.
* update the orterun help output to reflect that the "term w/o sync" error message can result from three, not two, scenarios
This commit was SVN r23023.
Many of the OPAL_ENABLE_FT should be OPAL_ENABLE_FT_CR, so fix those.
The OPAL Layer INC should call opal_output on restart so that it can refresh the string it prints to reflect the current pid/hostname which may have changed.
This commit was SVN r22824.
friends also receive &argc and &argv (George asked Jeff to Ralph to
review before committing). The thought is that passing argv and argc
to opal/orte_init be useful to other projects outside of OMPI that are
using OPAL and/or ORTE (especially in conjunction with some other
bootstrapping code where it is helpful to modify argv). It's such a
small thing that it's easy to apply here to make others' lives a
little easier.
Ask George for more details; I'm just the messenger. :-)
Judging by the copyrights on this patch, it's been around for a
while. :-)
This commit was SVN r22260.
Add orte configuration option to control the use of the framework in the system. Although the code will build, it will not be active unless configured with --enable-bootstrap.
If bootstrap is enabled and the new opal_sysinfo framework can successfully determine the cpu model, pass that info to the application as an MCA param to support some work at Sun.
Also, have daemons report back the resources they find to guide process mapping in bootstrap operations (i.e., where the daemon starts at node boot as opposed to being launched at application start).
Adjust some platform files to enable these capabilities.
This commit was SVN r22244.
1. ensure that orte_rmaps_base_schedule_policy does not override cmd line settings
2. when you try to bind to more cores than we have, generate a not-enough-processors error message
3. allow npersocket -bind-to-core combination - because, yes, somebody actually wants to do it.
This commit was SVN r21996.
1. default -npersocket to force -bind-to-socket
2. if we cannot get a value for cores/socket, try using #logical cpus. otherwise, default to 1 core
3. add missing error message for not-enough-processors
4. since we no longer loop through orte_register_params twice, put the auto-detect of
topology info in the rte_init for hnp and std_orted
5. fix bind-to-core, bysocket combination
This commit was SVN r21992.
The new options work by adding an ":if-avail" qualifier to the "bind-to-socket" and "bind-to-core" MCA params. If the system does not support this capability, the job will launch anyway. Without the qualifier, the job will abort with an error message indicating that the required functionality is not supported on this system.
This commit was SVN r21975.
1. finalize the logic for properly respecting externally assigned bindings. Thanks to Chris Samuel for his help with this. Still needs some acid testing, but appears to now work.
2. remove the double-logic of requiring opal_paffinity_alone AND bind-to-foo. If the user specifies bind-to-foo, trust her and just do it.
This commit was SVN r21885.
