Restore the functionality to error out (and show a helpful message) if
knem support is requested by is either not compiled in or cannot be
activated.
Thanks to Gus Correa for bringing the matter to our attention.
Somehow, this MCA param was accidentally dropped after v1.6.5. Thanks
to Gus Correa for bringing this matter to our attention.
Also moving some MCA params down from level 9 to levels 4/5.
of preregistered buffers
Before this change eager gets we retried on each progress loop. This commit
modifies the protocol to only retry eager gets when another eager get has
completed. This commit also cleans up some callback code that is no longer
needed.
The GNI_RDMAMODE_FENCE bit was a left over from
async progress work that is not needed at this point
in the gni BTL. Removing the bit also allows
for the removal of the GNI_CDM_MODE_BTE_SINGLE_CHANNEL
bit from the GNI_CdmCreate call.
This commit adds initial ugni thread safety support.
With this commit, sun thread tests (excepting MPI-2 RMA)
pass with various process counts and threads/process.
Also osu_latency_mt passes.
Properly setup the opal_process_info structure early in the initialization procedure. Define the local hostname right at the beginning of opal_init so all parts of opal can use it. Overlay that during orte_init as the user may choose to remove fqdn and strip prefixes during that time. Setup the job_session_dir and other such info immediately when it becomes available during orte_init.
This is a large update that does the following:
- Only allocate fast boxes for a peer if a send count threshold
has been reached (default: 16). This will greatly reduce the memory
usage with large numbers of local peers.
- Improve performance by limiting the number of fast boxes that can
be allocated per peer (default: 32). This will reduce the amount
of time spent polling for fast box messages.
- Provide new MCA variables to configure the size, maximum count,
and send count thresholds for fast boxes allocations.
- Updated buffer design to increase the range of message sizes that
can be sent with a fast box.
- Add thread protection around fast box allocation (locks). When
spin locks are available this should be updated to use spin locks.
- Various fixes and cleanup.
This commit was SVN r32774.
The use of restrict in the return type qualifier for mca_btl_vader_reserve_fbox
is being ignored by gnu compiler. for newer gcc, one sees this warning only
with -Wignored-qualifiers set, but for older variants of gcc it was reported
that numerous warning messages about this ignored qualifier were being
generated as vader is being compiled.
The warning reported by gcc is
btl_vader_fbox.h:53:47: warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
static inline mca_btl_vader_fbox_t * restrict mca_btl_vader_reserve_fbox (struct mca_btl_base_endpoint_t *ep, const size_t size)
This commit was SVN r32714.
The question of whether or not the openib BTL supports loopback is a separate question. It may be more appropriate to make the modex be PMIX_GLOBAL for cases where openib can support loopback so someone can run without a shared memory component. I'll leave that decision to the IB vendors.
This commit was SVN r32702.
- do not have mca_btl_openib_component.default_recv_qps point to the stack
- do not reset mca_btl_openib_component.default_recv_qps in btl_openib_component_open
cmr=v1.8.3:reviewer=miked
This commit was SVN r32642.
Per #4874, code review revealed a possible race condition in the
module struct and the connectivity agent. Move the setup of the
connectivity agent listener until the module struct has been fully
setup.
This commit was SVN r32573.
When no components were able to be found, btl_base_select() was
showing the wrong help message -- one that indicated that a specific
component could not be found. And it left off a string argument, so
the end of the help message was garbage.
This commit creates a new help message for this case and updates the
show_help call to use the new message.
This commit was SVN r32572.
WHAT: Merge the PMIx branch into the devel repo, creating a new
OPAL “lmix” framework to abstract PMI support for all RTEs.
Replace the ORTE daemon-level collectives with a new PMIx
server and update the ORTE grpcomm framework to support
server-to-server collectives
WHY: We’ve had problems dealing with variations in PMI implementations,
and need to extend the existing PMI definitions to meet exascale
requirements.
WHEN: Mon, Aug 25
WHERE: https://github.com/rhc54/ompi-svn-mirror.git
Several community members have been working on a refactoring of the current PMI support within OMPI. Although the APIs are common, Slurm and Cray implement a different range of capabilities, and package them differently. For example, Cray provides an integrated PMI-1/2 library, while Slurm separates the two and requires the user to specify the one to be used at runtime. In addition, several bugs in the Slurm implementations have caused problems requiring extra coding.
All this has led to a slew of #if’s in the PMI code and bugs when the corner-case logic for one implementation accidentally traps the other. Extending this support to other implementations would have increased this complexity to an unacceptable level.
Accordingly, we have:
* created a new OPAL “pmix” framework to abstract the PMI support, with separate components for Cray, Slurm PMI-1, and Slurm PMI-2 implementations.
* Replaced the current ORTE grpcomm daemon-based collective operation with an integrated PMIx server, and updated the grpcomm APIs to provide more flexible, multi-algorithm support for collective operations. At this time, only the xcast and allgather operations are supported.
* Replaced the current global collective id with a signature based on the names of the participating procs. The allows an unlimited number of collectives to be executed by any group of processes, subject to the requirement that only one collective can be active at a time for a unique combination of procs. Note that a proc can be involved in any number of simultaneous collectives - it is the specific combination of procs that is subject to the constraint
* removed the prior OMPI/OPAL modex code
* added new macros for executing modex send/recv to simplify use of the new APIs. The send macros allow the caller to specify whether or not the BTL supports async modex operations - if so, then the non-blocking “fence” operation is used, if the active PMIx component supports it. Otherwise, the default is a full blocking modex exchange as we currently perform.
* retained the current flag that directs us to use a blocking fence operation, but only to retrieve data upon demand
This commit was SVN r32570.
Thanks to Ashley Pittman for pointing the modex should now be zero'ed
cmr=v1.8.2:ticket=trac:4871
This commit was SVN r32568.
The following Trac tickets were found above:
Ticket 4871 --> https://svn.open-mpi.org/trac/ompi/ticket/4871
PGI compilers 2013 and older do not support the following syntax :
mca_btl_scif_modex_t modex = {.port_id = mca_btl_scif_module.port_id};
so split it on two lines
cmr=v1.8.2:reviewer=hjelmn
This commit was SVN r32555.
It turns out that we ''can'' get to the endpoint destructor with the
endpoint still on the "endpoints needing ACKs" list. So if it's on
the list, remove it first, and then DESTRUCT the opal_list_item_t.
This prevents an assert() fail in debug builds. We'd like to let this
soak over the weekend.
cmr=v1.8.2:reviewer=dgoodell
This commit was SVN r32546.
Rarely -- but it happens -- the connectivity client gets ECONNREFUSED
because the connectivity agent listen() backlog is too small. Rather
than put in a loop on the client side, take the simple way out for
now: increase the backlog size to an arbitrarily-large number.
Reviewed by Dave Goodell.
cmr=v1.8.2:reviewer=ompi-rm1.8
This commit was SVN r32543.
Instead of waiting to destroy the connectivity agent during component
shutdown, have the module shutdown send an "unlisten" command to the
cagent that will tell it to stop listening on a given interface.
This commit was SVN r32536.
1. After we receive N abnormally-short messages (meaning: corrupted),
print a show_help message about it. N defaults to 25. N can be set
to 0 disable the message via btl_usnic_max_short_packets.
1. If we receive a completion error for something other than a
receive, display a show_help message.
Reviewed by Dave Goodell.
CMR'ing to v1.8.3, but it will require a custom patch because of the
OMPI->OPAL BTL move.
cmr=v1.8.3
This commit was SVN r32522.
There were remaining references to size of MPI_COMM_WORLD,
etc. in ugni btl which prevented building of opal library
following btl move to opal.
Eventually another mechanism will need to be found for
providing hints to BTLs about how to setup internal
resources relevant to max. number possible endpoints, etc.
Conflicts:
opal/mca/btl/ugni/btl_ugni_component.c
This commit was SVN r32507.
