* Move ipv6comat.h code into opal_config_bottom.h and change into some
more intelligent testing of structures
* Change opal's if interface to use sockaddr instead of sockaddr_storage,
as the RFCs suggest we do
* Move the networking code in opal that isn't directly related to if
detection into net.h
* Add quicky function to get the port out of either a sockaddr_in
or sockaddr_in6, saving a bunch of code in the oob.
* Update TCP oob and btl with new interface
This commit was SVN r14679.
* Require Autoconf 2.60 or higher and remove some cruft
required for AC 2.59 or the AC 2.59 / AC 2.60 mix
* Remove a bunch of now unnecessary AC_SUBST calls
* Use the libtool-provided variables for the -I and
library to use when compiling against ltdl
Fixes trac:1000
This commit was SVN r14652.
The following Trac tickets were found above:
Ticket 1000 --> https://svn.open-mpi.org/trac/ompi/ticket/1000
via the visibility feature that is provided by some compilers.
Per default this feature is disabled, to enable it you need to
configure with --enable-visibility and obviously you need a compiler
with visibility support. Please refer to the wiki for more information.
https://svn.open-mpi.org/trac/ompi/wiki/Visibility
This commit was SVN r14582.
assumptions in the FT restart code for the ORTE layer.
This fixes those problems by having the RML completely shutdown and
restart the OOB framework (instead of just the module as before).
This makes it much easier to manage, and maintainable as the OOB
changes in the future.
The SDS now does communication as part of its startup procedure, so
we need to make sure we restart the RML before the SDS so that it can
communicate properly.
OOB base [close|open] used a static bool to determine if they have
been called previously or not. I needed to expose this boolean so
that I can close() then open() the oob base in the restart procedure.
The functionality has not changed, we just now have the ability to
open/close the framework as many times as we need to as long as we
always call them in that order. (So calling open twice in a row is not allowed
as before, it is only allowed if you open(), close(), then open() again).
Things seem to be working now.
This commit was SVN r14515.
- make opal_sockaddr2str() take a sockaddr_storage instead of a sockaddr_in6
so that it works for IPv4 and IPv6 addresses, and remove a whole bunch
of #ifs in the OOOB code.
- Fix a compiler warning in the TCP BTL due to run-time determined
array size by making it a dynamicly allocated array.
- Fix the unpacking code of IPv4 addresses when using IPv6 support, so
that the address is in the correct location (instead of in an IPv6
structure, use an IPv4 structure). Refs trac:1005.
This commit was SVN r14514.
The following Trac tickets were found above:
Ticket 1005 --> https://svn.open-mpi.org/trac/ompi/ticket/1005
This completes the minor changes required to the PLS components. Basically, there is a small change required to the parameter list of the orted cmd functions. I caught and did it for xcpu and poe, in addition to the components listed in my email - so I think that only leaves xgrid unconverted.
The orted fail-to-start mods will also make changes in the PLS components, but those can be localized so they come in one at a time.
This commit was SVN r14499.
Test for system limits (where known) prior to doing things like fork and pipe since some systems aren't very nice about it when we try to exceed such limits.
This commit was SVN r14494.
There is a binomial algorithm in the code (i.e., the HNP would send to a subset of the orteds, which then relay it on according to the typical log-2 algo), but that has a bug in it so the code won't let you select it even if you tried (and the mca param doesn't show, so you'd *really* have to try).
This also involved a slight change to the oob.xcast API, so propagated that as required.
Note: this has *only* been tested on rsh, SLURM, and Bproc environments (now that it has been transferred to the OMPI trunk, I'll need to re-test it [only done rsh so far]). It should work fine on any environment that uses the ORTE daemons - anywhere else, you are on your own... :-)
Also, correct a mistake where the orte_debug_flag was declared an int, but the mca param was set as a bool. Move the storage for that flag to the orte/runtime/params.c and orte/runtime/params.h files appropriately.
This commit was SVN r14475.
This bug(?) become apparent due to the installdirs commit since these tools
were not finding the proper libraries since the paths were wonkey.
It all looks good now. :)
This commit was SVN r14461.
finally brings in functionality that is already on the 1.2 branch, and
was developed and tested in the v1.2ofed branch (and other places).
Short version of new features:
* Support for ibv_fork_init()
* Automatically fill in the openib BTL bandwidth value by
querying the HCA port
* Installdirs functionality
* Fixes to always use -I in the Fortran wrapper compilers (#924)
* Gleb's mpool updates
* Remove some kruft in btl/openib/configure.m4, therefore
fixing the harmless warnings noted in #665
* Bunches of updates to the Linux RPM spec file
I.e., effectively the same thing that r14411 brought to the v1.2
branch.
Also effectively brought in r14432 and r14433 (some fixes on top of
the original r14411 commit to v1.2). Still need to bring in the moral
equivalent of r14445 after this commit (fixes to installdirs).
This commit was SVN r14449.
The following SVN revision numbers were found above:
r14411 --> open-mpi/ompi@83b31314ae
r14432 --> open-mpi/ompi@a48f160595
r14433 --> open-mpi/ompi@68f346d2bc
r14445 --> open-mpi/ompi@13d366b827
Create a sentinel value in the metadata file to clearly indicate
that the sequence number is complete (versus in progress). This
way we do not try to restart from an invalid sequence number
which can lead to badness.
This commit was SVN r14423.
the program it try to spawn is missing.
Description of the problem: When the rsh pls try to spawn a local
process which is missing (such as a removed orted) the orterun
deadlock.
Description of the fix: The forked child deal with finding the
program to be executed. If it fails to find it, then instead of
calling exit (as a normal forked program is expected to do) it
continue the execution using a execution path it was never
expected to use (back in orterun and then main). Bad things
happens as expected. Forcing the child to use exit when it fails
to find the orted (and forcing the child to use exit everywhere
instead of return) correct the logic of the rsh pls and make it
behave as expected.
This commit was SVN r14377.
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
follow the same behavior as before, the changes just make sure the check is done
in linear time and the memory usage is kept to a minimum.
This commit was SVN r14331.
as the IOF components lack the required finalize function. Instead rely on the
module finalize. Read the comment or more informations.
This commit was SVN r14323.
Collect the base 'orted' command line into a base function since most of the
PLS components were duplicating this code. Add AMCA parameter command line
component to the base set.
Add Aggregate MCA parameter support to the following PLS components:
- gridengine
- process
- slurm
- poe
- tm
Improve support for 'rsh' component.
Did/could not support the following components:
- bproc
- proxy
- xcpu
- cnos
- xgrid
The above components had peculiar needs that made it non-trivial to add an
option. The authors of these components need to help in supporting this
new option.
I was only able to test the SLURM and RSH components due to system availability.
The others should work without problem.
This commit was SVN r14284.
The following Trac tickets were found above:
Ticket 976 --> https://svn.open-mpi.org/trac/ompi/ticket/976
- Make it so that all the GPR pointer arrays are allocated initially at 16 elements instead of 512. This saves (on a 64 bit machine) approximately 4*(# procs + # nodes) KB.
- Fix up the segment prealloc function so that preallocating an existant segment is not an error, and make the areas where we do large inserts use it.
Fix the orte_pointer_array to efficiently implement setting its size. Before we just realloced the array one block at a time until the desired size was reached. Now we resize it all in one realloc.
This commit was SVN r14264.
* Remove the connect() timeout code, as it had some nasty race conditions
when connections were established as the trigger was firing. A better
solution has been found for the cluster where this was needed, so just
removing it was easiest.
* When a fatal error (too many connection failures) occurs, set an error
on messages in the queue even if there isn't an active message. The
first message to any peer will be queued without being active (and
so will all subsequent messages until the connection is established),
and the orteds will hang until that first message completes. So if
an orted can never contact it's peer, it will never exit and just sit
waiting for that message to complete.
* Cover an interesting RST condition in the connect code. A connection
can complete the three-way handshake, the connector can even send
some data, but the server side will drop the connection because it
can't move it from the half-connected to fully-connected state because
of space shortage in the listen backlog queue. This causes a RST to
be received first time that recv() is called, which will be when waiting
for the remote side of the OOB ack. In this case, transition the
connection back into a CLOSED state and try to connect again.
* Add levels of debugging, rather than all or nothing, each building on
the previous level. 0 (default) is hard errors. 1 is connection
error debugging info. 2 is all connection info. 3 is more state
info. 4 includes all message info.
* Add some hopefully useful comments
This commit was SVN r14261.
1. Remove a unneeded field, bytes_avail, from orte_buffer_t. It is a calcualed value, and updating it everywhere is worse then just calculating it in the one place it is acutally used.
2. Change it so the default size of a orte_buffer is 128 bytes instead of 1024 bytes. We then double the size of the buffer up to 1024 bytes, then we additively increase the size by 1024 bytes at a time as was done before.
This commit was SVN r14252.
deal with the PLS RSH. Remove support for unknown user (i.e. if the user is
not known by the system, then it shouldn't be allowed to spawn anything).
This commit was SVN r14232.
