2. fix for MPI_Free_mem, was calling deregister but never called mpool_free.. so
we leaked memory. Still an open issue here though, if the memory is alloc'd
and the mpool doesn't create and cache a registration, we will never find the
mpool to free with.
This commit was SVN r9944.
we send our local addr_t OOB. Remote side then matches endpoints and calls
dat_ep_connect(). Everything should be the same as before from here, except
that client/server roles are reversed.
- Properly set our buffer size when posting receives. When the frag used to
transfer address information is recycled by the free list, the wrong buffer
size was being used, which caused buffer overflow errors.
- Finally put the uDAPL error handling stuff in the mpool component.
- Remove a few more OPAL_OUTPUTs.
This commit was SVN r9569.
add object size to opal class
no longer need the size when allocating a new object as this is stored in
the class structure
--- dr changes
Previous rev. maintained state on the communicator used for acking duplicate
fragments, but the communicator may be destroyed prior to successfull
delivery of an ack to the peer. We must therefore maintain this state
globally on a per peer, not a per peer, per communicator basis.
This requires that we use a global rank on the wire and translate this as
appropriate to a local rank within the communicator.
This commit was SVN r9454.
- Grab the mpool_registration in _frag_common_constructor()
- Save the LMR context in the segment key
- No need for cookie variables - can just cast the frag
- No need to memcpy() data when recv'ing
- Add an LMR triplet to the fragment structure and initialize it
in btl_udapl_alloc().
- Whitespace/typo fixes, remove some opal_output() calls
Looks like I can use triplets describing sub-regions of registered LMR's. So I
do this - prior to this patch I was sending the entire free list memory over,
which isn't correct :)
Back to an earlier problem - when sending address information right after
connection establishment, the receiving end receives a DTO completion event and
appears to have good data. But the sending end never receives a DTO completion
event indicating the send completed, and never completes the client side of the
connection.
This commit was SVN r9386.
to let the PML (or io, more generally the low level request manager)
to have it's own release function (what was before the req_fini). This
function will only be called from the low level while the req_free will
be called from the upper level (MPI layer) in order to mark the request
as not used by the user anymore.
From the request point of view the requests will be marked as inactive
everytime we read their status (true for persistent as well). As
MPI_REQUEST_NULL is already marked as inactive, the test and wait functions
are simpler. The drawback is that now we have to change in the
ompi_request_{test|wait} the req_status of the request once we get it's
status.
This commit was SVN r9290.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
deallocation came from the allocator (malloc, fee, etc) or somewhere
else (the user calling mmap/munmap, etc). Going to be used by Galen
to determine if it is worth searching the allocations tree
Set flag if it is possible to intercept mmap (not always possible
due to a circular dependency between mmap, dlsym, and calloc)
This commit was SVN r8521.
* turns out (duh!) that there was a reason that the <projectdir>dir
variable was set in the AM conditional. If not, stupid directories
are created and not needed... duh.
This commit was SVN r8205.
component/base Makefile.am files, reducing the time configure spends
stamping out Makefiles at the end
* Install base_impl.h file when devel-headers are being installed
This commit was SVN r8200.
When compiling C++ code that includes something that looks for the C++
header file "memory" (stupid C++ headers not having .h extensions), it
goes through the header file search path, which includes $(topsrcdir)/opal,
so it finds the directory $(topsrcdir)/opal/memory/ and tries to load
that as the memory header file and all goes downhill.
This commit was SVN r8111.
--with-devel-headers is given to configure:
* allocator, rcache, and mpool were putting things in the wrong place
* timer wasn't installing the inline implementations at all
This commit was SVN r7805.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
- corrected memory hook callback to catch all allocations (need to optimize this)
- don't attempt to consolidate allocations
This commit was SVN r7600.
searching the tree. Modified the memory callback to search the tree at each
page boundary for registrations. This is necessary as an application may
malloc memory and send out of any portion of that memory, even discontiguous
regions.
This commit was SVN r7510.
add misc asserts to check for proper reference counting.
ugly hack 1 -- use mallopt to never release memory ala sbrk - this is
commented out in mca_btl_mvapi_component_init
ugly hack 2 -- test registrations comming out of the tree via rcache_find, for
an unknown reason the tree is returning registrations where the address is not
within the base or bound of the registration. If this happens, we return
NULL.
comment out code to enable mem hooks if leave_pinned is set, note we can do
this via an mca param and will default it to leave_pinned with mem_hooks when
we iron out these issues.
I am adding a unit test for the rcache. Note that we have a unit test for the
rb tree but the compare function is significantly different than that used for
registrations. After we have tracked down the issues with rcache_rb we will
remove the above hacks.
This commit was SVN r7499.
be used in MPI_Alloc_mem operations. Note that we found an interesting bug in
which if memory was allocated by the sm mpool (via mmap) and then registered
via the mvapi mpool, the registration would fail on certain systems.
Added mca param mpool_base_use_mem_hooks, set to 1 to enable the memory hooks
so that memory is deregistered if the user frees it behind our back. This is
only useful if the mca param mpi_leave_pinned is also set to 1. Otherwise all
registrations are deregistered within the MPI library or via
MPI_Free_buf. After testing we should probably set both mpi_leave_pinned and
mpool_base_use_mem_hooks to default to 1.
This commit was SVN r7415.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
add a -I to find the included ltdl.h (vs. a system-installed ltdl.h)
- Clean up kruft in a bunch of Makefile.am's to remove now-unnecessary
AM_CPPFLAGS settings to get static-components.h for each framework
- Move the component_repository API functions out of opal/mca/base/base.h
and into opal/mca/base/mca_base_component_repository.h in order to
decrease unnecessary dependencies (e.g., before this, almost
everything in the tree depended on ltdl.h, which is unnecessary --
only a small number of files really need ltdl.h)
This commit was SVN r7127.
issue so PUT is default.. We are determining if this is an openib issue or a
btl issue as we have seen performance increases on mvapi.
This commit was SVN r6928.
Fixed receive descriptor counts that limited mvapi and openib to 2 procs.
Begin porting error messages to use the BTL_ERROR macro.
This commit was SVN r6554.
multiple components to share a single mpool module (e.g., the
ptl/btl and coll sm components).
- Re-tool the ptl, btl, and coll sm components to first look for the
target mpool module, and if they don't find it, to create it.
- coll sm component now correctly identifies when it is supposed to
run or not (i.e., if all the processes in the communicator are on
the same host). Now we just need to fill in some algorithms. :-)
This commit was SVN r6530.
corrected free and realloc in mpool. Added alloc_base to
mca_mpool_base_registration_t to be used as the actual alloc'd base address,
which may be different from the reported base address due to page allignment.
This commit was SVN r6524.
Red Storm. Add stub functions to ompi_config_bottom.h when they are
around
* Add protection for a bunch of #include <netinet/in.h>s
* Fix up the Portals BTL so that it compiles on Red Storm and has the
right mojo for initialization on Red Storm
* Add some important comments to ompi_check_package and mvapi configures
* Add support for platforms without getpwuid() (aka, Red Storm).
This commit was SVN r6478.
sockaddr_in - seems to be a good indicator)
* disable util/if code if no inet devices (again, no sockaddr_in)
* add enable/disable flag to disable stacktrace pretty-print code
(defaults to enabled). Seems there's something funky going on with
the preprocessor on Red Storm that was causing problems - this was
the easiest fix
* clean up a bunch of the configure.m4 files to remove bogus comments,
properly comment them, fix the dumb logic for happy/unhappy
* Create a macro for testing both header and library for a package,
since we seem to do this kind of test quite often. Handles the
-I and -L search paths properly (including stripping out /usr and
/usr/local if not needed)
* Converted mvapi components to configure.m4, using the nice new
ompi_check_package macro (above)
This commit was SVN r6454.
threads (basically, same as before, but we now link the right thread
libraries).
* Add disable-io-romio flag to disable compiling ROMIO
* Migrathe mvapi btl from configure.stub to configure.m4
This commit was SVN r6453.
