1. file activity - can monitor file size, access and modification times. If these fail to change over a specified number of sampling iterations (rate is an mca param), then the errmgr is notified.
2. memory usage - checks amount of memory used by a process. Limit and sampling rate can be set.
This support must be enabled by configuring --enable-sensors.
ompi_info and orte-info have been updated to include the new framework.
Also includes some initial steps toward restoring the recovery capability. Most notably, the ODLS API has been extended to include a "restart_proc" entry for restarting a local process, and organizes the various ERRMGR framework globals into a single struct as we do in the other ORTE frameworks. Fix an oversight in the ERRMGR framework where a pointer array was constructed, but not initialized.
Implementation continues.
This commit was SVN r23043.
Aleksej Saushev.
Dont use bash or bashism in shell scripts
We should use Posix' setpgid(0,0), which is equivalent to setpgrp().
This commit was SVN r22829.
Cleanup the kill_procs command by removing a no-longer-used param. We update the process state when the proc actually exits.
This commit was SVN r22783.
Have orte call setpgrp after forking (but before exec) when
orte_forward_job_control is set. Then have it send signals to the
child's process group. This allows suspending jobs that fork.
If a SIGTSTP arrives before the processes have been launched, then
record it and suspend them right after launching.
This commit was SVN r22557.
1. ensure that orte_rmaps_base_schedule_policy does not override cmd line settings
2. when you try to bind to more cores than we have, generate a not-enough-processors error message
3. allow npersocket -bind-to-core combination - because, yes, somebody actually wants to do it.
This commit was SVN r21996.
1. default -npersocket to force -bind-to-socket
2. if we cannot get a value for cores/socket, try using #logical cpus. otherwise, default to 1 core
3. add missing error message for not-enough-processors
4. since we no longer loop through orte_register_params twice, put the auto-detect of
topology info in the rte_init for hnp and std_orted
5. fix bind-to-core, bysocket combination
This commit was SVN r21992.
The new options work by adding an ":if-avail" qualifier to the "bind-to-socket" and "bind-to-core" MCA params. If the system does not support this capability, the job will launch anyway. Without the qualifier, the job will abort with an error message indicating that the required functionality is not supported on this system.
This commit was SVN r21975.
1. finalize the logic for properly respecting externally assigned bindings. Thanks to Chris Samuel for his help with this. Still needs some acid testing, but appears to now work.
2. remove the double-logic of requiring opal_paffinity_alone AND bind-to-foo. If the user specifies bind-to-foo, trust her and just do it.
This commit was SVN r21885.
I have no machine which allows me to do external binding, so I will have to ask others to test the new logic. However, I did verify that these changes don't break the existing logic when no external bindings were present.
This commit was SVN r21842.
Adds several new mpirun options:
* -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding.
* -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned.
* -bind-to-core - currently the default behavior (maintained from prior default)
* -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile
Similar features/options are provided at the board level for multi-board nodes.
Documentation to follow...
This commit was SVN r21791.
messages when delivering a signal (like STOP or CONT)
to a non-existant process. This fixes trac:1929.
Also, only print one error message in the other cases.
This commit was SVN r21263.
The following Trac tickets were found above:
Ticket 1929 --> https://svn.open-mpi.org/trac/ompi/ticket/1929
1. replacing mpi_paffinity_alone with opal_paffinity_alone - for back-compatibility, I have aliased mpi_paffinity_alone to the new param name. This caus
es a mild abstraction break in the opal/mca/paffinity framework - per the devel discussion...live with it. :-) I also moved the ompi_xxx global variable
that tracked maffinity setup so it could be properly closed in MPI_Finalize to the opal/mca/maffinity framework to avoid an abstraction break.
2. Added code to the odls/default module to perform paffinity binding and maffinity init between process fork and exec. This has been tested on IU's odi
n cluster and works for both MPI and non-MPI apps.
3. Revise MPI_Init to detect if affinity has already been set, and to attempt to set it if not already done. I have *not* tested this as I haven't yet f
igured out a way to do so - I couldn't get slurm to perform cpu bindings, even though it supposedly does do so.
This has only been lightly tested and would definitely benefit from a wider range of evaluation...
This commit was SVN r21209.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
In case we use memcmp, strlen, strup and friends include <string.h>
Also several constants.h are not included directly
- Let's have mca_topo_base_cart_create return ompi-errors in
ompi/mca/topo/base/topo_base_cart_create.c
This commit was SVN r20773.
Without this patch, doing spawn in a loop ended up by exhausting all
available file descriptors pretty quickly. There were about 5 file
descriptors opened per spawned process. Now the number of file
descriptors managed by the process (orted or HNP)
is a lot smaller.
This commit was SVN r19864.
1. completely and cleanly separates responsibilities between the HNP, orted, and tool components.
2. removes all wireup messaging during launch and shutdown.
3. maintains flow control for stdin to avoid large-scale consumption of memory by orteds when large input files are forwarded. This is done using an xon/xoff protocol.
4. enables specification of stdin recipients on the mpirun cmd line. Allowed options include rank, "all", or "none". Default is rank 0.
5. creates a new MPI_Info key "ompi_stdin_target" that supports the above options for child jobs. Default is "none".
6. adds a new tool "orte-iof" that can connect to a running mpirun and display the output. Cmd line options allow selection of any combination of stdout, stderr, and stddiag. Default is stdout.
7. adds a new mpirun and orte-iof cmd line option "tag-output" that will tag each line of output with process name and stream ident. For example, "[1,0]<stdout>this is output"
This is not intended for the 1.3 release as it is a major change requiring considerable soak time.
This commit was SVN r19767.
Provide support for four MPIR extensions that allow specification of debugger daemon executable, argv for the debugger daemon, whether or not to forward debugger daemon IO, and whether or not debugger daemon will piggy-back on ORTE OOB network. Last is not yet implemented.
No change in behavior or operation occurs unless (a) the debugger specifically utilizes the extensions and, for co-locate while running, the user specifically enables the capability via an MCA param. Two of the MPIR extensions supported here are used in a widely-used debugger for a large-scale installation. The other two extensions are new and being utilized in prototype work by several debuggers for possible future release.
This commit was SVN r19275.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
Update the rsh tree spawn capability so we spawn the next wave of daemons before launching our own local procs.
Add an ability to encode nodenames for large clusters with contiguous node name numbering schemes - this allows communication of all node names in a few bytes instead of tens-of-bytes/node.
This commit was SVN r18338.
The bug was a race condition in the barrier operation that caused the barrier in MPI_Finalize to fail on very short programs.
Scalaiblity was improved by using the daemons to aggregate modex and barrier messages before sending them to the rank=0 proc. Improvement is proportional to ppn, of course, but there really wasn't a scaling problem at low ppn anyway. This modification also paves the way for better allgather operations since now all the data for each node is sitting at the daemon level, and the daemons are now aware that a collective operation on the OOB is underway (so they -can- participate in a collective of their own to support it).
Also added better diagnostics to map out the timing associated with MPI_Init - turned on by -mca orte_timing 1.
This commit was SVN r17988.
