Adds several new mpirun options:
* -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding.
* -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned.
* -bind-to-core - currently the default behavior (maintained from prior default)
* -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile
Similar features/options are provided at the board level for multi-board nodes.
Documentation to follow...
This commit was SVN r21791.
Remove all architecture references from ORTE and put them back in the modex using modex_send/recv calls.
Hetero operations are now fully supported again. Comm_spawn now works up to the point where it segfaults due to an error in the CID code - which now allows Edgar to dig further! :-)
This commit was SVN r21655.
the message to update the structures, but instead use the information from
the URI. The reason is that even the launch report messages can get routed.
Deal with the orted_cmd_line in a single location.
This commit was SVN r21513.
that now the HNP send the messages using the routed component. In the case
of tree spawn, when a intermediary node spawn a child it doesn't know how
to forward a message to it, so when the node-map message is coming from
the HNP (as there is nothing yet in the contact/routing table) the message
is sent back the way it came. As a result the node-map message keeps jumping
between the HNP and the first level orteds.
The solution is to add a new option to the children orte_parent_uri, which
is only set when the orted is _not_ directly spawned by the HNP. When this
option is present on the argument list, the orted will add the parent to
its routing, and force the parent to update his routes (by sending the URI).
With this approach, the routing tree is build in same time as the processes
are spawned, and all messages from the HNP can be routed to the leaves.
However, this is far from an optimal solution. Right now, this so called tree
spawn, only spawn the children in a tree without doing anything about the
"connect back to the HNP" step. The HNP is flooded with reports from all the
orted. The total number of messages is higher than in the non tree startup
scheme, so we do not expect this approach to be scalable in the current
incarnation. A complete overhaul of the tree startup is required in order
improve the scalability. Stay tuned!
This commit was SVN r21504.
Add a new tm ess module that exploits this capability.
Update the various plm modules to enable it - just a minor change reflecting an added param to a plm base function.
Additional fixes included:
1. remove an erroneous cleanup of session directories in the tool finalize procedure - tools don't create session directories to begin with!
2. fix a duplicate free when attempting to execute a non-existent app
3. cleanup an typo in the comm utilities
4. fix comm_spawn - was perturbed by the changes in pack/unpack of orte_job_t to properly support orte-ps
Been tested on slurm and tm machines, using all tests in orte/test/mpi. May run into issue with command line length on large jobs due to inclusion of node info to support static ports - will fix this next with addition of regexp generator to compress that info.
This commit was SVN r21248.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
This patch contains the following items:
* Fix the flag passed to open() for the read side of the named pipe between the local and app coordinator. There is a race condition when using O_RDWR on a named pipe (not sure how that bug got in there in the first place).
* Adjust control in the C/R thread timing
* Clarify return code in BLCR component
* Allow the user to adjust the max wait time for the named pipes in the FileM local coordinator by using the MCA parameter "snapc_full_max_wait_time" (Default: 20 seconds)
* If the application terminates while there are active FileM operations, force mpirun to wait on these operations to complete.
* Allow the user to set the local copy command (Default: cp) via MCA parameter "filem_rsh_cp"
* Implement the ability to throttle the number of outgoing connections in FileM. At larger scales this type of explicit throttling helps prevent overwhelming the HNP machine. Default: 10, set via MCA parameter: {{{filem_rsh_max_outgoing}}}
This commit was SVN r21167.
The following SVN revision numbers were found above:
r21131 --> open-mpi/ompi@0deb009225
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
several header files (previously included by header-files)
now have to be moved "upward".
This is mainly system headers such as string.h, stdio.h and for
networking, but also some orte headers.
This commit was SVN r21095.
- This patch solely _adds_ required headers and is rather localized
The next patch (after RFC) heavily removes headers (based on script)
- ompi/communicator/communicator.h: For sources that use
ompi_mpi_comm_world, don't require them to include "mpi.h"
- ompi/debuggers/ompi_common_dll.c: mca_topo_base_comm_1_0_0_t needs
#include "ompi/mca/topo/topo.h"
- ompi/errhandler/errhandler_predefined.h:
ompi/communicator/communicator.h depends on this header file!
To prevent recursion just have fwd declarations.
#include "ompi/types.h" for fwd declarations of the main structs.
- ompi/mca/btl/btl.h: #include "opal/types.h" for ompi_ptr_t
- ompi/mca/mpool/base/mpool_base_tree.c: We use ompi_free_list_t and
ompi_rb_tree_t, so have the proper classes
- ompi/mca/op/op.h:
Op is pretty self-contained: Nobody up to now has done
#include "opal/class/opal_object.h"
- ompi/mca/osc/pt2pt/osc_pt2pt_replyreq.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/base/base.h:
We use opal_lists
- ompi/mca/pml/dr/pml_dr_vfrag.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/ob1/pml_ob1_hdr.h:
#include "ompi/mca/btl/btl.h" for mca_btl_base_segment_t
- opal/dss/dss_unpack.c:
#include "opal/types.h"
- opal/mca/base/base.h:
#include "opal/util/cmd_line.h" for opal_cmd_line_t
- orte/mca/oob/tcp/oob_tcp.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp.h:
#include "opal/threads/threads.h" for opal_thread_t
- orte/mca/oob/tcp/oob_tcp_msg.c:
#include "opal/types.h"
- orte/mca/oob/tcp/oob_tcp_peer.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp_send.c:
#include "opal/types.h"
- orte/mca/plm/base/plm_base_proxy.c:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
- orte/mca/rml/base/rml_base_receive.c:
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/mca/rml/oob/rml_oob_recv.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/mca/rml/oob/rml_oob_send.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/runtime/orte_data_server.c
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/runtime/orte_globals.h:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
Tested on Linux/x86-64
This commit was SVN r20817.
In case we use memcmp, strlen, strup and friends include <string.h>
Also several constants.h are not included directly
- Let's have mca_topo_base_cart_create return ompi-errors in
ompi/mca/topo/base/topo_base_cart_create.c
This commit was SVN r20773.
