* add a new MCA param orte_hostname_cutoff to specify the number of nodes at which we stop including hostnames. This defaults to INT_MAX => always include hostnames. If a value is given, then we will include hostnames for any allocation smaller than the given limit.
* remove ompi_proc_get_hostname. Replace all occurrences with a direct link to ompi_proc_t's proc_hostname, protected by appropriate "if NULL"
* modify the OMPI-ORTE integration component so that any call to modex_recv automatically loads the ompi_proc_t->proc_hostname field as well as returning the requested info. Thus, any process whose modex info you retrieve will automatically receive the hostname. Note that on-demand retrieval is still enabled - i.e., if we are running under direct launch with PMI, the hostname will be fetched upon first call to modex_recv, and then the ompi_proc_t->proc_hostname field will be loaded
* removed a stale MCA param "mpi_keep_peer_hostnames" that was no longer used anywhere in the code base
* added an envar lookup in ess/pmi for the number of nodes in the allocation. Sadly, PMI itself doesn't provide that info, so we have to get it a different way. Currently, we support PBS-based systems and SLURM - for any other, rank0 will emit a warning and we assume max number of daemons so we will always retain hostnames
This commit was SVN r29052.
This creates a really bad scaling behavior. Users have found a nearly 20% launch time differential between mpirun and PMI, with PMI being the slower method. Some of the problem is attributable to poor exchange algorithms in RM's like Slurm and Alps, but we make things worse by calling "get" so many times.
Nathan (with a tad advice from me) has attempted to alleviate this problem by reducing the number of "get" calls. This required the following changes:
* upon first request for data, have the OPAL db pmi component fetch and decode *all* the info from a given remote proc. It turned out we weren't caching the info, so we would continually request it and only decode the piece we needed for the immediate request. We now decode all the info and push it into the db hash component for local storage - and then all subsequent retrievals are fulfilled locally
* reduced the amount of data by eliminating the exchange of the OMPI_ARCH value if heterogeneity is not enabled. This was used solely as a check so we would error out if the system wasn't actually homogeneous, which was fine when we thought there was no cost in doing the check. Unfortunately, at large scale and with direct launch, there is a non-zero cost of making this test. We are open to finding a compromise (perhaps turning the test off if requested?), if people feel strongly about performing the test
* reduced the amount of RTE data being automatically fetched, and fetched the rest only upon request. In particular, we no longer immediately fetch the hostname (which is only used for error reporting), but instead get it when needed. Likewise for the RML uri as that info is only required for some (not all) environments. In addition, we no longer fetch the locality unless required, relying instead on the PMI clique info to tell us who is on our local node (if additional info is required, the fetch is performed when a modex_recv is issued).
Again, all this only impacts direct launch - all the info is provided when launched via mpirun as there is no added cost to getting it
Barring objections, we may move this (plus any required other pieces) to the 1.7 branch once it soaks for an appropriate time.
This commit was SVN r29040.
The orte rte component checks the orte_standalone_operation to decide
if it should wait for a message from the hnp or wait on the debugger.
This variable needed to be set to true in ess/pmi to enable the
correct path when direct launching.
cmr=v1.7.3:reviewer=rhc
cmr=v1.6.6:reviewer=rhc
This commit was SVN r29013.
This commit reintroduces key compression into the pmi db. This feature
compresses the keys stored into the component into a small number of
PMI keys by serializing the data and base64 encoding the result. This
will avoid issues with Cray PMI which restricts us to ~ 3 PMI keys per
rank.
This commit was SVN r28993.
George and I were talking about ORTE's error handling the other day in regards to the right way to deal with errors in the updated OOB. Specifically, it seemed a bad idea for a library such as ORTE to be aborting the job on its own prerogative. If we lose a connection or cannot send a message, then we really should just report it upwards and let the application and/or upper layers decide what to do about it.
The current code base only allows a single error callback to exist, which seemed unduly limiting. So, based on the conversation, I've modified the errmgr interface to provide a mechanism for registering any number of error handlers (this replaces the current "set_fault_callback" API). When an error occurs, these handlers will be called in order until one responds that the error has been "resolved" - i.e., no further action is required - by returning OMPI_SUCCESS. The default MPI layer error handler is specified to go "last" and calls mpi_abort, so the current "abort" behavior is preserved unless other error handlers are registered.
In the register_callback function, I provide an "order" param so you can specify "this callback must come first" or "this callback must come last". Seemed to me that we will probably have different code areas registering callbacks, and one might require it go first (the default "abort" will always require it go last). So you can append and prepend, or go first. Note that only one registration can declare itself "first" or "last", and since the default "abort" callback automatically takes "last", that one isn't available. :-)
The errhandler callback function passes an opal_pointer_array of structs, each of which contains the name of the proc involved (which can be yourself for internal errors) and the error code. This is a change from the current fault callback which returned an opal_pointer_array of just process names. Rationale is that you might need to see the cause of the error to decide what action to take. I realize that isn't a requirement for remote procs, but remember that we will use the SAME interface to report RTE errors internal to the proc itself. In those cases, you really do need to see the error code. It is legal to pass a NULL for the pointer array (e.g., when reporting an internal failure without error code), so handlers must be prepared for that possibility. If people find that too burdensome, we can remove it.
Should we ever decide to create a separate callback path for internal errors vs remote process failures, or if we decide to do something different based on experience, then we can adjust this API.
This commit was SVN r28852.
All builds since r28682 configured with '--without-hwloc' fail at "make"
time without this fix.
Reviewed by rhc@
This commit was SVN r28769.
The following SVN revision numbers were found above:
r28682 --> open-mpi/ompi@446e33a5d8
To resolve this situation, add the ability to specify a backend topology file that mpirun shall use for its mapping operations. Create a new "set_topology" function in opal hwloc to support it.
This commit was SVN r28682.
- orte_debugger_init_after_spawn was not being called for debuggers that
use the MPIR_attach_fifo to co-locate debugger daemons.
- MPIR_Breakpoint was not getting called if a debugger reattached. Add
a job state (ORTE_JOB_STATE_DEBUGGER_DETACH) to reset mpir_breakpoint_fired
to false when a debugger detaches to ensure MPIR_Breakpoint is called if
another debugger attaches. Tested with STAT 2.0/launchmon 1.0.
cmr:v1.7
This commit was SVN r28665.
some relevant updates/new functionality in the opal/mca/hwloc and
orte/mca/rmaps bases. This work was mainly developed by Mellanox,
with a bunch of advice from Ralph Castain, and some minor advice from
Brice Goglin and Jeff Squyres.
Even though this is mainly Mellanox's work, Jeff is committing only
for logistical reasons (he holds the hg+svn combo tree, and can
therefore commit it directly back to SVN).
-----
Implemented distance-based mapping algorithm as a new "mindist"
component in the rmaps framework. It allows mapping processes by NUMA
due to PCI locality information as reported by the BIOS - from the
closest to device to furthest.
To use this algorithm, specify:
{{{mpirun --map-by dist:<device_name>}}}
where <device_name> can be mlx5_0, ib0, etc.
There are two modes provided:
1. bynode: load-balancing across nodes
1. byslot: go through slots sequentially (i.e., the first nodes are
more loaded)
These options are regulated by the optional ''span'' modifier; the
command line parameter looks like:
{{{mpirun --map-by dist:<device_name>,span}}}
So, for example, if there are 2 nodes, each with 8 cores, and we'd
like to run 10 processes, the mindist algorithm will place 8 processes
to the first node and 2 to the second by default. But if you want to
place 5 processes to each node, you can add a span modifier in your
command line to do that.
If there are two NUMA nodes on the node, each with 4 cores, and we run
6 processes, the mindist algorithm will try to find the NUMA closest
to the specified device, and if successful, it will place 4 processes
on that NUMA but leaving the remaining two to the next NUMA node.
You can also specify the number of cpus per MPI process. This option
is handled so that we map as many processes to the closest NUMA as we
can (number of available processors at the NUMA divided by number of
cpus per rank) and then go on with the next closest NUMA.
The default binding option for this mapping is bind-to-numa. It works
if you don't specify any binding policy. But if you specified binding
level that was "lower" than NUMA (i.e hwthread, core, socket) it would
bind to whatever level you specify.
This commit was SVN r28552.
functions will now show_help() their own error messages if something
goes wrong (per r28470).
This commit was SVN r28471.
The following SVN revision numbers were found above:
r28470 --> open-mpi/ompi@2ff95a7739
