- the registration array is now global instead of one by BTL.
- each framework have to declare the entries in the registration array reserved. Then
it have to define the internal way of sharing (or not) these entries between all
components. As an example, the PML will not share as there is only one active PML
at any moment, while the BTLs will have to. The tag is 8 bits long, the first 3
are reserved for the framework while the remaining 5 are use internally by each
framework.
- The registration function is optional. If a BTL do not provide such function,
nothing happens. However, in the case where such function is provided in the BTL
structure, it will be called by the BML, when a tag is registered.
Now, it's time for the second step... Converting OB1 from a switch based PML to an
active message one.
This commit was SVN r17140.
for dynamic selection of cpc methods based on what is available. It
also allows for inclusion/exclusions of methods. It even futher allows
for modifying the priorities of certain cpc methods to better determine
the optimal cpc method.
This patch also contains XRC compile time disablement (per Jeff's
patch).
At a high level, the cpc selections works by walking through each cpc
and allowing it to test to see if it is permissable to run on this
mpirun. It returns a priority if it is permissable or a -1 if not. All
of the cpc names and priorities are rolled into a string. This string
is then encapsulated in a message and passed around all the ompi
processes. Once received and unpacked, the list received is compared
to a local copy of the list. The connection method is chosen by
comparing the lists passed around to all nodes via modex with the list
generated locally. Any non-negative number is a potentially valid
connection method. The method below of determining the optimal
connection method is to take the cross-section of the two lists. The
highest single value (and the other side being non-negative) is selected
as the cpc method.
svn merge -r 16948:17128 https://svn.open-mpi.org/svn/ompi/tmp-public/openib-cpc/ .
This commit was SVN r17138.
Also introduces work in progress "convertor" sender based copy algorithm. This algorithm cannot be selected without other modifications in the convertor (not currently available in trunk). The default old synchronous copy algorithm is selected by default.
This commit was SVN r17063.
(sometimes after the merge with the ORTE branch), the opal_pointer_array
will became the only pointer_array implementation (the orte_pointer_array
will be removed).
This commit was SVN r17007.
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
such a way that converter will not be able to pack some of it. This commit adds
handling of such cases. If converter can't pack any data for a BTL the data is
sent over another BTL that has data to send.
This commit was SVN r16493.
PML base will take care of the registration with the event library.
Otherwise, (and this apply for the CM case) the MTL are in charge of
registering their own progress function.
This commit was SVN r16415.
* Fix some missing includes in a few places.
* Add the cr_request() functionality to the BLCR CRS component.
We are now dependent upon the 0.6.* series of BLCR.
* Made the CR notification mechanism a registered function.
This way we can have an OPAL-only version and it can be replaced at
runtime with the ORTE version.
* Add a 'opal_cr_allow_opal_only' parameter that will enable OPAL-only
CR functionality when the user wants it. Default: Disabled.
* Fix the placement of a checkpoint request check in MPI_Init
* Pull the OPAL notification mechanism into the SnapC framework.
* We no longer fork/exec the 'opal-checkpoint' command for local
checkpointing, the Local coordinator in the orted does this directly.
* The Local and Application coordinator talk together bypassing the OPAL
notifiation mechanism.
* Optimized the Local <-> App Coordinator communication.
* Improved the structure used to track vpid_snapshots in the local coord.
* Fix a race condition in which an application under heavy communication load
may produce an inconsistent global checkpoint.
This commit was SVN r16389.
The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component.
This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done:
As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in.
In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in.
The incoming changes revamp these procedures in three ways:
1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step.
The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic.
Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure.
2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed.
The size of this data has been reduced in three ways:
(a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes.
To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose.
(b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction.
(c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using.
While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly.
3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup.
It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging.
Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future.
There are a few minor additional changes in the commit that I'll just note in passing:
* propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details.
* requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details.
* cleanup of some stale header files
This commit was SVN r16364.
NOTE: This build system does not work with the current autogen.sh. Modified one is under heavy testing to make sure it does not have side effects
This commit was SVN r16110.
no more work associated with this request. No more outstanding completions or
packets and send scheduling isn't running in another thread.
This commit was SVN r16013.
the ompi_convertor_need_buffers function to only return 0 if the convertor
is homogeneous (which it never does on the trunk, but does to on v1.2, but
that's a different issue). Only enable the heterogeneous rdma code for
a btl if it supports it (via a flag), as some btls need some work for this
to work properly. Currently only TCP and OpenIB extensively tested
This commit was SVN r15990.
side too. Otherwise a content of the recvreq->req_rdma array is replaced later
without freeing previous content and refcount on registration in mpool become
wrong.
This commit was SVN r15978.
from the posted generic_recv-queue.
- Move the PERUSE_COMM_MSG_MATCH_POSTED_REQ from
MCA_PML_OB1_RECV_REQUEST_MATCHED to
mca_pml_ob1_recv_frag_match() as suggested by Terry Dontje
Only post, if this is not a probe/iprobe request.
- Do not post PERUSE_COMM_REQ_MATCH_UNEX for probes / iprobes and
do in correct order before PERUSE_COMM_MSG_REMOVE_FROM_UNEX_Q
This commit was SVN r15947.
PERUSE_COMM_REQ_ACTIVATE event.
Therefore move the PERUSE_TRACE_COMM_EVENT for this event from
MCA_PML_BASE_SEND_REQUEST_INIT / MCA_PML_BASE_RECV_REQUEST_INIT
to the proper places into pml_ob1_isend.c / pml_ob1_irecv.c right
after the MCA_PML_OB1_SEND_REQUEST_INIT /
MCA_PML_OB1_RECV_REQUEST_INIT.
This commit was SVN r15945.
on a parameter and are determined in runtime. r15346 removed calculation of
correct sizes for this structures. This patch adds it back and fixes trac:1116, #1114.
This commit was SVN r15932.
The following SVN revision numbers were found above:
r15346 --> open-mpi/ompi@433f8a7694
The following Trac tickets were found above:
Ticket 1116 --> https://svn.open-mpi.org/trac/ompi/ticket/1116
A subset of this patch needs to be applied to v1.2
Refs trac:928
This commit was SVN r15918.
The following Trac tickets were found above:
Ticket 928 --> https://svn.open-mpi.org/trac/ompi/ticket/928
* Code cleanup and rationalization
* Fixed: mca_pml_base_send/recv_request are now allocated before recreation by the PML-V
* Fixed: pointer arithmetic bug in sender based that crashed
* Changed: directory structure. This is one step forward using autogen.sh to build static-components.h (it needs to have the directory structure of a mca framework for this).
This commit was SVN r15878.
Fixed: All copyrights are now correct up to 2007
Fixed: Build system now works with VPATHs
Changed: protocol_example is now ignored by default
This commit was SVN r15627.
* General TCP cleanup for OPAL / ORTE
* Simplifying the OOB by moving much of the logic into the RML
* Allowing the OOB RML component to do routing of messages
* Adding a component framework for handling routing tables
* Moving the xcast functionality from the OOB base to its own framework
Includes merge from tmp/bwb-oob-rml-merge revisions:
r15506, r15507, r15508, r15510, r15511, r15512, r15513
This commit was SVN r15528.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15506
r15507
r15508
r15510
r15511
r15512
r15513
Cleanup ALL instances of output involving the printing of orte_process_name_t structures using the ORTE_NAME_ARGS macro so that the number of fields and type of data match. Replace those values with a new macro/function pair ORTE_NAME_PRINT that outputs a string (using the new thread safe data capability) so that any future changes to the printing of those structures can be accomplished with a change to a single point.
Note that I could not possibly find outputs that directly print the orte_process_name_t fields, but only dealt with those that used ORTE_NAME_ARGS. Hence, you may still have a few outputs that bark during compilation. Also, I could only verify those that fall within environments I can compile on, so other environments may yield some minor warnings.
This commit was SVN r15517.
have to construct/destruct only once. Therefore, the construction will
happens before digging for a PML, while the destruction just before
finalizing the component.
Add some OPAL_LIKELY/OPAL_UNLIKELY.
This commit was SVN r15347.
receive queues are shared among all PMLs, they are declared in the base PML,
and the selected PML is in charge of initializing and releasing them.
The CM PML is slightly different compared with OB1 or DR. Internally it use
2 different types of requests: light and heavy. However, now with this patch
both types of requests are stored in the same queue, and cast appropriately
on the allocation macro. This means we might use less memory than we allocate,
but in exchange we got full support for most of the parallel debuggers.
Another thing with this patch, is that now for all PML (CM included) the basic
PML requests start with the same fields, and they are declared in the same order
in the request structure. Moreover, the fields have been moved in such a way
that only one volatile/atomic will exist per line of cache (hopefully).
This commit was SVN r15346.
than just the PML/BTLs these days. Also clean up the code so that it
handles the situation where not all nodes register information for a given
node (rather than just spinning until that node sends information, like
we do today).
Includes r15234 and r15265 from the /tmp/bwb-modex branch.
This commit was SVN r15310.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15234
r15265
relative bandwidths of each BTL. Precalculate what part of a message should
be send via each BTL in advance instead of doing it during scheduling.
This commit was SVN r15248.
each BTL. Precalculate what part of a message should be send via each BTL in
advance instead of doing it during scheduling.
This commit was SVN r15247.
reason it's that we don't have the nice configure stuff, so detecting
when to enable the CR PML it's kind of hard. Keep it defined and at
least it compile smoothly.
This commit was SVN r15116.
single threaded builds. In its default configuration, all this does
is ensure that there's at least a good chance of threads building
based on non-threaded development (since the variable names will be
checked). There is also code to make sure that a "mutex" is never
"double locked" when using the conditional macro mutex operations.
This is off by default because there are a number of places in both
ORTE and OMPI where this alarm spews mega bytes of errors on a
simple test. So we have some work to do on our path towards
thread support.
Also removed the macro versions of the non-conditional thread locks,
as the only places they were used, the author of the code intended
to use the conditional thread locks. So now you have upper-case
macros for conditional thread locks and lowercase functions for
non-conditional locks. Simple, right? :).
This commit was SVN r15011.
that allows to send any range of a request by send/recv instaed of RDMA
and use it to send data from the end of a request in pipeline protocol.
This commit was SVN r14841.
This is required to tighten up the BTL semantics. Ordering is not guaranteed,
but, if the BTL returns a order tag in a descriptor (other than
MCA_BTL_NO_ORDER) then we may request another descriptor that will obey
ordering w.r.t. to the other descriptor.
This will allow sane behavior for RDMA networks, where local completion of an
RDMA operation on the active side does not imply remote completion on the
passive side. If we send a FIN message after local completion and the FIN is
not ordered w.r.t. the RDMA operation then badness may occur as the passive
side may now try to deregister the memory and the RDMA operation may still be
pending on the passive side.
Note that this has no impact on networks that don't suffer from this
limitation as the ORDER tag can simply always be specified as
MCA_BTL_NO_ORDER.
This commit was SVN r14768.
The primary change that underlies all this is in the OOB. Specifically, the problem in the code until now has been that the OOB attempts to resolve an address when we call the "send" to an unknown recipient. The OOB would then wait forever if that recipient never actually started (and hence, never reported back its OOB contact info). In the case of an orted that failed to start, we would correctly detect that the orted hadn't started, but then we would attempt to order all orteds (including the one that failed to start) to die. This would cause the OOB to "hang" the system.
Unfortunately, revising how the OOB resolves addresses introduced a number of additional problems. Specifically, and most troublesome, was the fact that comm_spawn involved the immediate transmission of the rendezvous point from parent-to-child after the child was spawned. The current code used the OOB address resolution as a "barrier" - basically, the parent would attempt to send the info to the child, and then "hold" there until the child's contact info had arrived (meaning the child had started) and the send could be completed.
Note that this also caused comm_spawn to "hang" the entire system if the child never started... The app-failed-to-start helped improve that behavior - this code provides additional relief.
With this change, the OOB will return an ADDRESSEE_UNKNOWN error if you attempt to send to a recipient whose contact info isn't already in the OOB's hash tables. To resolve comm_spawn issues, we also now force the cross-sharing of connection info between parent and child jobs during spawn.
Finally, to aid in setting triggers to the right values, we introduce the "arith" API for the GPR. This function allows you to atomically change the value in a registry location (either divide, multiply, add, or subtract) by the provided operand. It is equivalent to first fetching the value using a "get", then modifying it, and then putting the result back into the registry via a "put".
This commit was SVN r14711.
We eagerly send data up to btl_*_eager_limit with the match
Upon ACK of the MATCH we start using send/receives of size
btl_*_max_send_size up to the btl_*_rdma_pipeline_offset
After the btl_*_rdma_pipeline_offset we begin using RDMA writes of
size btl_*_rdma_pipeline_frag_size.
Now, on a per message basis we only use the above protocol if the
message is larger than btl_*_min_rdma_pipeline_size
btl_*_eager_limit - > same
btl_*_max_send_size -> same
btl_*_rdma_pipeline_offset -> btl_*_min_rdma_size
btl_*_rdma_pipeline_frag_size -> btl_*_max_rdma_size
btl_*_min_rdma_pipeline_size is new..
This patch also moves all BTL common parameters initialisation into
btl_base_mca.c file.
This commit was SVN r14681.
via the visibility feature that is provided by some compilers.
Per default this feature is disabled, to enable it you need to
configure with --enable-visibility and obviously you need a compiler
with visibility support. Please refer to the wiki for more information.
https://svn.open-mpi.org/trac/ompi/wiki/Visibility
This commit was SVN r14582.
with RDMAing the rest of it. Also more than one RDMA writes can be performed
simultaneously by different threads. To make this code thread safe this patch
clones original request convertor for each RDMA fragment.
This commit was SVN r14574.
