args from the old data-type. As this args are only read-only, I don't want to have several
copies around, so I add a reference count to them and simply attach them to the new
datatype. The args array now get freed only when the last reference dissapear.
This commit was SVN r9191.
you can't be in a post and a start at the same time, and that is clearly
legal to do
* Fix interptretation of when the epochs start for MPI_Fence. Only start
an epoch if communication actually occurs, otherwise it isn't actually
an epoch. I don't know who thought that wording in the MPI standard
was a good idea, but can't change it now...
This commit was SVN r9139.
MPI-2:6.3.4 says about reduction operations
* Have the point-to-point one-sided component spew a warning and return
an error if a non-predefined datatype is used with an MPI_OP other
than MPI_REPLACE. Yes, this violates the MPI standard, but it's the
best we can do until George and I implement support for figuring out
where all the locations to update are..
This commit was SVN r9134.
Note, the checksums are not enabled currently, setting to zero as the
convertor is not ready for checksums yet.
Also, we can't call unpack/pack on convertor with 0 bytes, otherwise it
crashes.
This commit was SVN r9062.
- Add more checks on the params to ensure that the user conformed to
MPI-2 (i.e., can have MPI_UNDEFINED for p *or* r in the real/complex
functions, but not both)
- Always return MPI_ERR_ARG, not MPI_ERR_OTHER -- seems to make a
little more sense here, since any errors that are returned are
solely because of the arguments that were passed into the function
This commit was SVN r9037.
support for Fortran 90 module flags in the wrapper compilers when I
re-wrote them to be less project-specific. Re-add that support and drop
the ugly install in include hack I had done.
This commit was SVN r9003.
changes. The two Big Changes are elegance (much more re-use of code
rather than cut-n-pasting the same code over and over and over and...)
and enabling cross-compilation for F77 and F90 (because we actually
have to *run* some compiled F77 and F90 programs for some of the
tests, which obviously won't work in a cross-compilation environment
-- so enable the use of config.cache to load such values in
cross-compiling environments).
This commit was SVN r8991.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
* Implement win_lock and win_unlock in the pt2pt component. Not well
tested, but appears to move bits if properly motivated...
This commit was SVN r8922.
It appears that some compilers look in the library paths and others in
the include paths, so just have both available and save ourselves the
trouble.
This commit was SVN r8897.
Granger for bringing this to our attention.
This needs to be modified slightly to go to the v1.0 branch. Will
submit patch via e-mail.
This commit was SVN r8872.
* Implement fortran handle -> c handle tracking
* Remove some unneeded locking around free lists (the free list
macros do their own locking)
* Try to be a bit more memory friendly with the w_mode setting /
checking
This commit was SVN r8865.
complete, but stable enough that it will have no impact on general development,
so into the trunk it goes. Changes in this commit include:
- Remove the --with option for disabling MPI-2 onesided support. It
complicated code, and has no real reason for existing
- add a framework osc (OneSided Communication) for encapsulating
all the MPI-2 onesided functionality
- Modify the MPI interface functions for the MPI-2 onesided chapter
to properly call the underlying framework and do the required
error checking
- Created an osc component pt2pt, which is layered over the BML/BTL
for communication (although it also uses the PML for long message
transfers). Currently, all support functions, all communication
functions (Put, Get, Accumulate), and the Fence synchronization
function are implemented. The PWSC active synchronization
functions and Lock/Unlock passive synchronization functions are
still not implemented
This commit was SVN r8836.
implementation was not thread safe). See lengthy comment in
ompi/mpi/cxx/intercepts.cc::ompi_mpi_cxx_op_intercept() for a full
explanation.
This commit was SVN r8606.
confuses the Lahey compiler (because it doesn't want to name a module
mpi_kinds.ompi_module). We shouldn't need this because we're already
touching a sentinel file (mpi_kinds.ompi_module) for make
dependencies; we don't need the compiler-generated module to be named
that.
This commit was SVN r8571.
- Fix some typos from last commit
- Add collectives of intercommunicators
- Move the static current_op member from Intracomm to Comm
--> this is still a remaining problem: the global variable
current_op is not thread safe!
This commit was SVN r8520.
functionality. This is a global registration, so all components have to be made
aware of the registration -- therefore, do things at the component level, not the
module level.
This commit was SVN r8314.
case of:
sizeof(MPI_Flogical) != sizeof (int)
and
Fortran value of .TRUE. != 1
as is often the case.
- Check in configure the value of .TRUE., the C-type coresponding to
logical and check, that fortran compiler does not do something strange
with arrays of logicals
- Convert all occurrences of logicals in the fortran wrappers, only
in case it is needed.
*Please note* Implementation of MPI_Cart_sub needed special treatment.
- Output these value in ompi_info -a
- Clean up the prototypes_mpi.h to just have a single definition and
thereby deleting the necessity for prototypes_pmpi.h
- configured, compiled and tested with F90-program, which uses
MPI_Cart_create and MPI_Cart_get:
linux ia32, gcc (no testing, as no f90)
linux ia32, gcc --disable-mpi-f77 --disable-mpi-f90 (had a bug there)
linux ia32, icc-8.1
linux opteron, gcc-3.3.5, pgcc, pathccx/pathf90 (tested just
pgi-compiler)
linux em64t, gcc, icc-8.1 (tested just icc)
This commit was SVN r8254.
argument is defined to be
integer (KIND=MPI_ADDRESS_KIND)
we have to map that to an MPI_Aint in the f->c interface, else the
typecast back from the C to the Fortran interface will be wrong as well.
The same holds (at least) for all other new MPI-2 datatype functions
which take a byte-displacement or an address as an argument.
This commit was SVN r8243.
functions (e.g., MPI_REDUCE). We don't generate the back-end
subroutines for them (because it makes an expontential number of
subroutines, and compilers literally will segv), so we shouldn't
generate the f90 interfaces for them, either. This allows user's MPI
F90 apps to automaitcally fall through to the F77 bindings for these
functions.
This commit was SVN r8094.
name was changed to shorten it too early (and then not restored), so
the "interface" name was not output correctly into
mpi-f90-interfaces.h. Change to make it like the other long functions
-- temporarily change it to a shorter name while outputing the
subroutines, and then revert it when outputting the end interface.
This commit was SVN r8086.
This flag is inherited by all datatypes create with unavailable datatypes. Basically, we let the user create the wrong datatype but we dont let him using it for any pt2pt communications or any pack/unpack.
This commit was SVN r8069.
one that does not return any value. There are 2 exceptions MPI_Wtick and MPI_Wtime.
For these 2 we can insert the bindings manually.
This commit was SVN r8016.
restoring the PMPI version. A variety of reasons for this:
- mpi.h was blinding using inline in a C header without the configrue mojo
properly set it, as mpi.h doesn't include ompi_config.h. This eventually
would have caused a borked build.
- mpi.h and mpif.h were never updated to not include PMPI_W{tick,time} as
a proper prototype
- The C++ and F90 bindings didn't do the right things when there was no
PMPI version of the C call, but profiling was enabled
- Since we only use gettimeofday, the function call overhead really doesn't
matter
This should probably go to the 1.0 branch
This commit was SVN r8014.
REDUCE_SCATTER to more thoroughly check the datatype/op combination
to see if it's valid or not. If it's not, print a meaningful error
message rather than "Invalid MPI_Op" indicating what specifically
was wrong (therefore hopefully helping users track down where in the
code the problem is, and/or telling us that there's a reduction
operation combo that we don't support that we should)
- The check for whether a datatype is intrinsic needed to be updated
-- it's not sufficient to check that dtype->id < DT_MAX_PREDEFINED;
you really need to check the PREDEFINED flag on the datatype.
Thanks to George for this fix (only intrinsics have a meaningful
value in dtype->id).
This commit was SVN r7923.
at the top-level MPI API function. This allows two kinds of
scenarios:
1. MPI_Ireduce(..., op, ...);
MPI_Op_free(op);
MPI_Wait(...);
For the non-blocking collectives that we're someday planning -- to
make them analogous to non-blocking point-to-point stuff.
2. Thread 1:
MPI_Reduce(..., op, ...);
Thread 2:
MPI_Op_free(op);
Granted, for #2 to occur would tread a fine line between a correct and
erroneous MPI program, but it is possible (as long as the Op_free was
*after* MPI_reduce() had started to execute). It's more realistic
with case #1, where the Op_free() could be executed in the same thread
or a different thread.
This commit was SVN r7870.
the same (since those are both mandated by MPI and <31 characters),
but change some of the back-end subroutine names so that they are <31
characters and therefore obey the F90 standard. Remove an outdated /
useless (and confusing) script.
This commit was SVN r7764.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
mpi_kinds.ompi_module before the rest which depends on it. Fix suffix
rules, add suffix rule for libtool objects for testing. Fix for VPATH
builds.
This commit was SVN r7048.
- fix the --with-f90-max-array-dim configure switch
- fix configure test to find the supported f90 linker switch to find
fortran modules
- Unbelievably, some versions of sh (cough cough Solaris 9 cough
cough) actually seem to internally perform a "cd" into a
subdirectory when you run "./foo/bar", such that if you try to
source a script in the top-level directory in the bar script (i.e.,
". some_script" in the bar script), it will try to run it in the
"foo" subdirectory, rather than the top-level directory! #$@#$%#$%
So we have to pass in the pwd to the scripts so that they know where
some_script is.
- Reworked much of ompi/mpi/f90/Makefile.am for lots of reasons. See
the internal comments (mostly having to do with dependency stuff --
Libtool does not apparently support F90, so we can only build the
F90 library statically.
This commit was SVN r6993.
* don't know what I was thinking, but can't use the MCA_PML_CALL macro on
the two data values, as they don't have things that the macro can
expand into
This commit was SVN r6868.
the values to the PML structure. This will allow PMLs that want to do
hardware matching at the cost of a smaller range of valid tags and cids.
Updated all the places that used the MPI_TAG_UB_VALUE constant to instead
look at the pml struct.
This commit was SVN r6778.
Any non-blocking P2P function should set the request to something else
then MPI_REQUEST_NULL, when passed a source/dest of MPI_PROC_NULL.
Introduce a new ompi_request_empty, which returns the
MPI_SOURCE=MPI_PROC_NULL, MPI_TAG=MPI_ANY_TAG, count=0 as specified by
the MPI-standard.
This commit was SVN r6611.
the external32 conversions (as specified in the MPI standard) the other one is the local
convertor that can be used for MPI_Pack and MPI_Unpack functions.
This commit was SVN r6375.
* rename ompi_basename to opal_basename
* rename ompi bitop functions to opal
* rename ompi_cmd_line to opal_cmd_line
* rename ompi_sizet2int to opal_sizet2int
* rename orte_daemon_init to opal_daemon_init
* rename ompi_few to opal_few
This commit was SVN r6330.
