* Fixed the AC_ARG_ENABLE for the oshmem option.
* Fixed the AM_CONDITIONALs values for the projects.
* Re-added (and slightly simplified) the use of PROJECT_OSHMEM in
various Makefile.am's to disable building OSHMEM stuff
Submitted by Jeff, reviewed and approved by Ralph.
cmr=v1.7.5:reviewer=ompi-gk1.7
This commit was SVN r31062.
NOTE: I transferred the oshmem-disabled-by-default from the 1.7 branch to the trunk to minimize future disruption if/when we change that option.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31006.
- -check-shmem-params is OFF by default. It checks OSHMEM API params and will abort on bad input
- hcoll do not save fallback coll pointers for unsupported collectives.
fixed by Val, Roman, reviewed by Miked/Igor
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30995.
This commit decouples OMPI deployment from the version(s) of the lower
layers of the stack by probing for UDP support.
Verbs applications assume a 40-byte header (there is no current
mechanism for querying payload offset). So to support a 42-byte UDP
header without causing existing applications like ibv_ud_pingpong or
older versions of OMPI to crash, we must inform libusnic_verbs that we
are aware of the nonstandard payload offset. We do this by overriding
the `transport_type` field of the device to be 42 before calling
`ibv_open_device`. If the library resets it to something else, then we
know the lower layers are UDP capable. Otherwise we use the older
custom-L2 format.
This necessitated some minor ugliness in common_verbs, but it's as tidy
as Jeff and I know how to make it right now.
This commit only adds support for UDP headers and connectivity over the
same L2 network, it does not touch routing or interface pairing.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30838.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
We're going to be bringing a bunch of usnic code to the SVN trunk
soon, and I basically brought this commit over out of order. So I'm
reverting it for now; the same functionality will come back shortly.
This commit was SVN r30805.
The following SVN revision numbers were found above:
r30804 --> open-mpi/ompi@5bedcc15bf
These constants are now upstream (see
https://git.kernel.org/cgit/libs/infiniband/libibverbs.git/commit/?id=f57a9c67eabb9e7f19c624ac3c8c27b7be55796c),
so let's support them properly in Open MPI.
Added bonus: consolidating these checks up in
ompi_check_openfabrics.m4 allowed removing some custom checks and
AC_DEFINE's from the usnic configure.m4 script.
Also change the usnic/configure.m4 check for IBV_EVENT_GID_CHANGE to
use AC_CHECK_DECLS (vs. AC_CHECK_DECL).
cmr=v1.7.5:reviewer=dgoodell
This commit was SVN r30804.
- Move the ptrdiff_t tests up higher in configure.ac to be with the
rest of the type tests.
- Create new OMPI_FIND_MPI_AINT_COUNT_OFFSET for finding the
corresponding types of MPI_Aint, MPI_Count, and MPI_Offset.
Consolidate all the old C and Fortran tests into this new macro (and
.m4 file).
- Fix Fortran MPI_*_KIND tests that incorrectly keyed off assumed
types (e.g., int64_t) rather than whatever the corresponding C
MPI_Aint, MPI_Count, MPI_Offset types turned out to be.
- Add new logic to ensure that sizeof(MPI_Count) <= sizeof(size_t),
because our entire PML, BTL, and convertor infrastructure requires
this. As a side effect, just like MPI_Offset the same type of
MPI_Count (because MPI_Count has to be able to hold an MPI_Offset,
so we can't let MPI_Offset be larger than a MPI_Count).
This commit was SVN r30776.
The following Trac tickets were found above:
Ticket 4205 --> https://svn.open-mpi.org/trac/ompi/ticket/4205
This particular test can leave various <foo>.mod files in the OMPI top
build dir, which leads developers to say "what are these .mod files in
my 'svn status' output?".
So make a subdir, run the tests in there, and then remove the subdir.
Reviewed by Dave Goodell.
This is not 100% necessary for OMPI 1.7.4, but it would be nice. The
goal is to have this test removed by OMPI 1.7.5 (i.e., fix ticket
4157). So I leave it up to the RM to decide whether this goes into
1.7.4 or not.
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r30524.
Ensure that these two flags are in all of mpif.h, the mpi module, and
the mpi_f08 module. Thanks to Rolf Rabenseifner for pointing out the
issue.
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r30519.
for 32-bit architectures.
This commit also modifies _OMPI_CHECK_HEADER to use AC_CHECK_HEADERS instead
of AC_CHECK_HEADER. This allows components to check for multiple headers
instead of just one. The new semantics of the header check in OMPI_CHECK_PACKAGE
are to return success if at least one of the specified headers exists. The new
semantics will not break current usage.
cmr=v1.7.5:ticket=trac:4053
This commit was SVN r30476.
The following Trac tickets were found above:
Ticket 4053 --> https://svn.open-mpi.org/trac/ompi/ticket/4053
implementation does (that is not quite adherant to the Fortran
standard). If a compiler allows this behavior, build the mpi_f08
wrapper. For example, ifort allows it, but Pathscale/EKOPath 5.0 is
stricter in its Fortran compliance and disallows it.
This test is temporary; the real fix is to make OMPI adhere to Fortran
properly (i.e., see #4157). Once we fix#4157, this test should be
removed. The main reason for committing this test is to put it into
v1.7.4 so that we can release, but with the intent to remove it by
1.7.5 (or 1.8.x at the latest!).
Refs trac:4157
cmr=v1.7.4:reviewer=ompi-rm1.7:subject=Add mpi_f08-(non)compliance configure test
This commit was SVN r30440.
The following Trac tickets were found above:
Ticket 4157 --> https://svn.open-mpi.org/trac/ompi/ticket/4157
names longer than 32 characters.
Per discussion on the devel list starting here:
http://www.open-mpi.org/community/lists/devel/2014/01/13799.php we
need a new litmus test to disqualify older Fortran compilers (e.g.,
Pathscale 4.0.12) that *seem* to support all the Right Things, but a)
do not support BIND(C, name="super_long_name") or b) run into an
internal error when compiling our mpi_f08 module.
Testing for b) is sketchy at best. But OMPI has some BIND(C) names
that are >32 characters, and the same compilers that exhibit b) also
seem to not support BIND(C) names that are >32 characters (i.e., a)).
Hence, the following BIND(C) test checks to ensure that BIND(C,
name="foo") works, where "foo" is actually a name >32 characters.
cmr=v1.7.4:reviewer=rhc:subject=Update Fortran configure test to exclude older pathscale/open64 compilers from mpi_f08
This commit was SVN r30421.
fix the case, to enable oshmem-fortran when "with-shmem" was specified and "ompi-fortran" was enabled and happy.
fixed by Roman, reviewed by Miked
Refs trac:3763
This commit was SVN r30391.
The following Trac tickets were found above:
Ticket 3763 --> https://svn.open-mpi.org/trac/ompi/ticket/3763
As discovered by the nightly build, r30379 broke the case where
configure does not find a fortran compiler, and no form of
--enable-mpi-fortran was specified.
This commit specifically calls out the difference between a user
specifying that they want Fortran bindings and the default "try to
compile all the Fortran bindings" cases.
cmr=v1.7.4:ticket=4162
This commit was SVN r30386.
The following SVN revision numbers were found above:
r30379 --> open-mpi/ompi@7b28af54bb
The following Trac tickets were found above:
Ticket 4162 --> https://svn.open-mpi.org/trac/ompi/ticket/4162
So just take out this useless warning.
cmr=v1.7.5:ticket=4163
This commit was SVN r30383.
The following Trac tickets were found above:
Ticket 4163 --> https://svn.open-mpi.org/trac/ompi/ticket/4163
Each Fortran bindings layer builds on the other. Specifically:
* You can build just mpif.h support
* You can build mpif.h and "use mpi" support
* You can build mpif.h and "use mpi" and "use mpi_f08" support
You cannot build mpif.h and "use mpi_f08" support without also
building "use mpi" support.
This new functionality adds new capabilities to the existing
--enable-fortran-mpi switch. You can now pass the following values:
* --enable-fortran-mpi=no or none: synonyms for --disable-fortran-mpi
(i.e., build no Fortran bindings).
* --enable-fortran-mpi=mpifh: build only mpif.h support
* --enable-fortran-mpi=usempi: build mpif.h and "use mpi" support
* --enable-fortran-mpi=usempif08: build mpif.h, "use mpi", and "use
mpi_f08" support
* --enable-fortran-mpi=yes or all: synonyms for --enable-fortran-mpi
(i.e., no argument), which will attempt to build all 3 Fortran
bindings
cmr=v1.7.4:ticket=4162
This commit was SVN r30379.
The following Trac tickets were found above:
Ticket 4162 --> https://svn.open-mpi.org/trac/ompi/ticket/4162
The check to enable shmem fortran was too early, MPI can disable fortran but SHMEM fortran check was already done.
Refs trac:3763
This commit was SVN r30340.
The following Trac tickets were found above:
Ticket 3763 --> https://svn.open-mpi.org/trac/ompi/ticket/3763
Add a configure test to see if the Fortran compiler supports the
PROTECTED keyword. If it does, use in mpi-f08-types.F90 (via a macro
defined in configure-fortran-output-bottom.h).
This is needed to support the PGI 9 Fortran compiler, which does not
support the PROTECTED keyword.
Note that regardless of whether we want to support the PGI 9 Fortran
compiler + mpi_f08, we need to correctly detect whether PROTECTED
works or not, and then use that determination as a criteria for
building the mpi_f08 module. Previously, mpi-f08-types.F90 used
PROTECTED unconditionally, and we didn't test for it in configure. So
if a compiler (e.g., PGI 9) supported everything else but didn't
support PROTECTED, it would try to compile the mpi_f08 stuff and choke
on the use of PROTECTED.
Refs trac:4093
This commit was SVN r30273.
The following Trac tickets were found above:
Ticket 4093 --> https://svn.open-mpi.org/trac/ompi/ticket/4093
Just some minor updates to make some Fortran test outputs be a bit
more consistent with each other. This can definitely wait until
1.7.5, unless it causes conflicts with other changes that need to come
into 1.7.4.
cmr=v1.7.5:reviewer=dgoodell
This commit was SVN r30271.
This configure option was only relevant when we were generating TKR
"use mpi" interfaces for MPI subroutines with choice buffers. Now
that we aren't, the only interface that needs to accept a choice
buffer is MPI_SIZEOF (which we have to provide).
And since there's now only several dozen interfaces in the "mpi" TKR
module, there's no reason to not generate ''all'' possible array rank
values (when there were thousands of interfaces, generating 4-vs-7
array ranks per interface per type was a big deal). The default used
to be 4; now we can just hard-code it to 7, the max possible value for
Fortran 2003 (I think the max was raised ?to 11? in F2008, but let's
not go there for now).
cmr=v1.7.5:reviewer=dgoodell:subject=Remove even more dead Fortran configury
This commit was SVN r30257.
BIND(C), but not ''all'' of it. So expand our configure checks to
look for multiple different forms of BIND(C):
* ISO_C_BINDING
* SUBROUTINE ... BIND(C)
* TYPE, BIND(C)
* TYPE(foo), BIND(C, name="bar")
If the compiler supports all of these, then declare that we support
BIND(C), and the rest of the mpi_f08 checks can continue. If we miss
any one of those, don't bother continuing -- we won't build the
mpi_f08 module.
Also push the results of all of these tests down to ompi_info so that
they can be reported easily (e.g., "Hey, why doesn't my OMPI
installation have the mpi_f08 module?").
cmr=v1.7.4:reviewer=jsquyres:subject=Expand Fortran BIND(C) configure checks
This commit was SVN r30247.
This should have been part of r30151/#4057. Oops.
cmr=v1.7.4:reviewer=dgoodell
This commit was SVN r30246.
The following SVN revision numbers were found above:
r30151 --> open-mpi/ompi@52b5e17d97
upcoming GCC/gfortran 4.9's ignore TKR interface.
This was originally committed in a side mercurial repo, but I sadly
completely forgot about it until Tobias reminded me.
cmr=v1.7.5:reviewer=dgoodell:subject=Add support for gfortran 4.9 Fortran ignore TKR
This commit was SVN r30152.
This commit adds support for placing the send memory segment in a
traditional shared memory segment when XPMEM is not available. The
current default is to reserve 4MB for shared memory on each process.
The latest benchmarks show vader performing better than sm on both
Intel and AMD CPUs.
For large messages vader will now use CMA if it is available (and
XPMEM is not).
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r30123.
r30016 was not enough to solve the issue.
So properly prefix all the shell variables used in opal_setup_java.m4
(one of them had an orte_ prefix -- oops!). Now we won't get any
conflicts.
Refs trac:4015
This commit was SVN r30037.
The following SVN revision numbers were found above:
r30016 --> open-mpi/ompi@35dfd26f9e
The following Trac tickets were found above:
Ticket 4015 --> https://svn.open-mpi.org/trac/ompi/ticket/4015
This *should* fix following situation:
1 mxm.rpm puts /etc/ld.so.conf.d/mxm.conf file during rpm install with libpath to /opt/mellanox/mxm/lib
2 some1 can extract mxm.rpm into $HOME/mxm and compile OMPI with new mxm location
3 during runtime, OMPI from prev step will pick MXM from step (1) instead of from step (2)
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r30005.
got linked together (work on one caused work in the other):
* Clean up a bunch of VAR_SCOPE issues in configure. This includes:
* Using VAR_SCOPE_PUSH and VAR_SCOPE_POP in more places
* Cleaning up the use of some shell variables (e.g., name them better)
* Add support for external libevent via
--with-libevent=<dir-to-libevent-install-tree>, as specifically
asked for by downstream packagers.
* Revamp how wrapper compiler RPATH (and RUNPATH) support is done.
The external libevent work exposed weakenesses in how the original
RPATH/RUNPATH work was done, so we had to re-do it to be a bit more
robust.
This work has not yet been tested on Solaris.
Refs trac:3694
This commit was SVN r29899.
The following Trac tickets were found above:
Ticket 3694 --> https://svn.open-mpi.org/trac/ompi/ticket/3694
more:
- Remove OPAL_ENABLE_MULTI_THREADS, since it didn't really do anything
correctly. Opal always has threads enabled at this point.
- Remove OMPI_ENABLE_PROGRESS_THREADS, since this hasn't worked in
8 years and it has performance issues we'll never be able to
overcome. Note that we have plans for re-adding async progress, using
a hybrid protocol of async and sync sends.
- OMPI_ENABLE_THREAD_MULTIPLE now determines whether the thread lock
macros do the check or not.
- Condition variables are ALWAYS polling right now, which fixes the thread
live-lock currently found when THREAD_MULTIPLE is turned on.
This commit was SVN r29891.
http://www.open-mpi.org/community/lists/users/2013/10/22882.php, fix
the value of MPI_STATUS_SIZE for the -i8 case. Thanks to Jim Parker
for bringing up the issue and providing the patch.
Separate patches are required for v1.6 and v1.7 (and will be attached
to their respective tickets), because this breaks ABI, so we need a
non-default configure option to fix the issue but knowingly break ABI.
cmr=v1.7.4:reviewer=bosilca:subject=Fix MPI_STATUS_SIZE for -i8 case
cmr=v1.6.6:reviewer=bosilca:subject=Fix MPI_STATUS_SIZE for -i8 case
This commit was SVN r29858.
r29830 -- Jeff will straighten this out with Alexander in person next
week (I can't test this myself because I have no access to libhcoll).
Sorry for the hassle...
Refs trac:3694
This commit was SVN r29842.
The following SVN revision numbers were found above:
r29830 --> open-mpi/ompi@3bd9c603ff
The following Trac tickets were found above:
Ticket 3694 --> https://svn.open-mpi.org/trac/ompi/ticket/3694
needed in the global scope ($ompi_check_fca_dir). This commit removes
it from the OPAL_VAR_SCOPE, so it should be fixed now.
Sorry about that, folks! :-(
This commit was SVN r29838.
The following SVN revision numbers were found above:
r29830 --> open-mpi/ompi@3bd9c603ff
This is helpful in the work for #3694: ensure that many places that
eventually end up in configure don't overly-pollute the global shell
variable space (because debugging accidental shell variable pollution
can be a real pain).
Refs trac:3694
This commit was SVN r29830.
The following Trac tickets were found above:
Ticket 3694 --> https://svn.open-mpi.org/trac/ompi/ticket/3694
This prevents bazillions of warnings from clang tha -Wno-long-double
isn't supported.
The warning that clang issues when it see -Wno-long-double is does not
use any of the words we were looking for, so I added "unknown" to the
list of words to look for. I also re-indented the two m4 tests so
that they're a bit more readable.
cmr=v1.7.4:reviewer=brbarret:subject=Update -Wno-long-double test to support clang
This commit was SVN r29681.
patch. See ticket #3885, comment 10 for an explination of why calling
_STRINGIFY on something that's not a numerical constant is always a bad idea.
This commit was SVN r29613.
The following SVN revision numbers were found above:
r29608 --> open-mpi/ompi@b71bd51cdd
OSX atomic support is disabled by default. Enable with --enable-osx-builtin-atomics.
Fixes trac:2120
This commit was SVN r29568.
The following Trac tickets were found above:
Ticket 2120 --> https://svn.open-mpi.org/trac/ompi/ticket/2120
Apologies for the breakage, I did my test build in the wrong window...
No reviewer.
cmr=v1.7.4:ticket=3865
This commit was SVN r29492.
The following SVN revision numbers were found above:
r29488 --> open-mpi/ompi@25dd719d4d
The following Trac tickets were found above:
Ticket 3865 --> https://svn.open-mpi.org/trac/ompi/ticket/3865
First cut does not attempt any "cross-check". As we discover compilers
which complain about __noinline__, we will add specific cross checks to
handle those cases.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29488.
Reworked ompi_info tool to be close with orte_info implementation.
ompi_info_register_types(), ompi_info_close_components() and
ompi_info_show_ompi_version() are moved to runtime/ompi_info_support.c.
Added runtime/oshmem_info_support layer that exports following api to be
used into oshmem_info tool as
oshmem_info_register_types()
oshmem_info_register_framework_params()
oshmem_info_close_components()
oshmem_info_show_oshmem_version()
These functions call ompi_info_support related interfaces as long as
Oshmem supports Open MPI/SHMEM combination.
Now orte_info/ompi_info/oshmem_info have identical implementation approach.
Possible improvement:
OSHMEM processing of --config option is the same as OMPI`s (code is duplicated).
Probably list of info_support interfaces can be extended by xxx_info_do_config().
developed by Igor, reviewed by miked
This commit was SVN r29429.
(http://www.open-mpi.org/community/lists/devel/2013/09/12889.php), I
renamed all "f77" and "f90" directory/file names to "fortran"
(including removing shmemf77 / shmemf90 wrapper compilers and
replacing them with "shmemfort").
2. Fixed several Fortran coding errors.
3. Removed lots of old/stale comments that were clearly the result of
copying from the OMPI layer and then not cleaning up afterwards (i.e.,
the comments were wholly inaccurate in the oshmem layer).
4. Removed both redundant and harmful code from oshmem_config.h.in.
5. Temporarily slave building the oshmem Fortran bindings to
--enable-mpi-fortran. This doesn't seem like a good long-term
solution, but at least you can now build all Fortran bindings (MPI +
oshmem) or not. *** SEE MY NOTE IN config/oshmem_configure_options.m4
FOR WORK THAT STILL NEEDS TO BE DONE!
This commit was SVN r29165.
configure-time dynamic allocation of flags. The net result for platforms
which only support BTL-based communication is a reduction of 8*nprocs bytes
per process. Platforms which support both MTLs and BTLs will not see
a space reduction, but will now be able to safely run both the MTL and BTL
side-by-side, which will prove useful.
This commit was SVN r29100.
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***
Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.
***************************************************************************************
I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.
The code is in https://bitbucket.org/rhc/ompi-oob2
WHAT: Rewrite of ORTE OOB
WHY: Support asynchronous progress and a host of other features
WHEN: Wed, August 21
SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:
* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)
* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.
* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients
* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort
* only one transport (i.e., component) can be "active"
The revised OOB resolves these problems:
* async progress is used for all application processes, with the progress thread blocking in the event library
* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")
* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.
* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.
* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object
* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions
* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel
* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport
* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active
* all blocking send/recv APIs have been removed. Everything operates asynchronously.
KNOWN LIMITATIONS:
* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline
* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker
* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways
* obviously, not every error path has been tested nor necessarily covered
* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.
* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways
* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC
This commit was SVN r29058.
Commit r27211 missed a config file change which broke ompi over
iwarp transports.
This fixes trac:3726 and should be added to cmr:v1.7.3:reviewer=jsquyres
This commit was SVN r29049.
The following SVN revision numbers were found above:
r27211 --> open-mpi/ompi@b27862e5c7
The following Trac tickets were found above:
Ticket 3726 --> https://svn.open-mpi.org/trac/ompi/ticket/3726
in generated executables on systems that support it. Use
--disable-wrapper-rpath to disable this behavior. See text in
README about --disable-wrapper-rpath for more details.
This commit was SVN r28479.
The following Trac tickets were found above:
Ticket 376 --> https://svn.open-mpi.org/trac/ompi/ticket/376
A few changes were required to support this move:
1. the PMI component used to identify rte-related data (e.g., host name, bind level) and package them as a unit to reduce the number of PMI keys. This code was moved up to the ORTE layer as the OPAL layer has no understanding of these concepts. In addition, the component locally stored data based on process jobid/vpid - this could no longer be supported (see below for the solution).
2. the hash component was updated to use the new opal_identifier_t instead of orte_process_name_t as its index for storing data in the hash tables. Previously, we did a hash on the vpid and stored the data in a 32-bit hash table. In the revised system, we don't see a separate "vpid" field - we only have a 64-bit opaque value. The orte_process_name_t hash turned out to do nothing useful, so we now store the data in a 64-bit hash table. Preliminary tests didn't show any identifiable change in behavior or performance, but we'll have to see if a move back to the 32-bit table is required at some later time.
3. the db framework was a "select one" system. However, since the PMI component could no longer use its internal storage system, the framework has now been changed to a "select many" mode of operation. This allows the hash component to handle all internal storage, while the PMI component only handles pushing/pulling things from the PMI system. This was something we had planned for some time - when fetching data, we first check internal storage to see if we already have it, and then automatically go to the global system to look for it if we don't. Accordingly, the framework was provided with a custom query function used during "select" that lets you seperately specify the "store" and "fetch" ordering.
4. the ORTE grpcomm and ess/pmi components, and the nidmap code, were updated to work with the new db framework and to specify internal/global storage options.
No changes were made to the MPI layer, except for modifying the ORTE component of the OMPI/rte framework to support the new db framework.
This commit was SVN r28112.
configure test to ensure that the Fortran compiler supports BIND(C)
with LOGICAL parameters (per
http://lists.mpi-forum.org/mpi-comments/2013/02/0076.php).
This may become moot shortly -- Pathscale tells me that they intend
upgrade their compiler to support BIND(C) with default LOGICAL in the
very near term (this week?). But we still want this configure test so
that Open MPI won't even try to build the F08 bindings with older
versions of the Pathscale compilers (or any compiler that doesn't
support BIND(C) and LOGICAL parameters).
This commit was SVN r28110.
The following Trac tickets were found above:
Ticket 3523 --> https://svn.open-mpi.org/trac/ompi/ticket/3523
* Clean up ${includedir} and ${libdir} for script wrapper compilers
* Update script wrapper compilers to work like the C wrapper compilers w.r.t static and dynamic linking
* Remove the ORTE script wrapper compilers since they didn't support the ${includedir} stuff and Ralph said they weren't used anymore.
This commit was SVN r28052.
