base/paffinity_base_service.c:153: warning: 'phys_core' may be used uninitialized in this function
base/paffinity_base_service.c:153: note: 'phys_core' was declared here
This commit was SVN r19580.
See opal/mca/paffinity/paffinity.h for explanation as to the physical vs logical nature of the params used in the API.
Fixes trac:1435
This commit was SVN r19391.
The following Trac tickets were found above:
Ticket 1435 --> https://svn.open-mpi.org/trac/ompi/ticket/1435
Bring in a new version of PLPA (v1.2b2) with some new capabilities for
offline processors and mapping of the Nth processor/socket/core to its
corresponding Linux processor/socket/core ID.
(Sorry for the configure change in the middle of the day, folks -- I
need it to be able to continue to integrate paffinity changes for
#1435...)
This commit was SVN r19282.
The following Trac tickets were found above:
Ticket 1435 --> https://svn.open-mpi.org/trac/ompi/ticket/1435
* Make the results of the top-level configure.ac test for
_SC_NPROCESSORS_ONLN be cached so that we can check for it
elsewhere (e.g., opal/mca/paffinity/posix/configure.m4)
* Update top-level configure.ac test for _SC_NPROCESSORS_ONLN: stamp
out another AC_TRY_COMPILE
* Ensure paffinity:posix doesn't even try to compile if we don't
have _SC_NPROCESSORS_ONLN
* Minor style updates
This commit was SVN r19118.
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
Modify the odls to remove a (size_t) typecast in front of the num_processors variable just in case it is returned negative. This usually is accompanied by an opal_error, so this shouldn't make any difference - but it is more technically correct.
This commit was SVN r19008.
* Fix linux paffinity component to make a "best" guess when PLPA
can't find topology information in the Linux kernel. That is, if
PLPA can't tell us the max_processor_id, just assume that it's the
same as the number of processors. If you have a more complex
system than that (e.g., you have holes in your available processor
IDs), you'll likely be running a Linux kernel that supports the
topology information, and this problem won't happen.
* Make sure to conver the return codes from PLPA to OPAL_ERR* codes.
This commit was SVN r19001.
The following Trac tickets were found above:
Ticket 1250 --> https://svn.open-mpi.org/trac/ompi/ticket/1250
For now, hide the OSX component with .ompi_ignore so only I can see it until I can ensure that it doesn't inadvertently interfere with Linux and Solaris support.
This clears the conflict with Windows.
This commit was SVN r18989.
Short version: remove opal_paffinity_alone and restore
mpi_paffinity_alone. ORTE makes various information available for the
MPI layer to decide what it wants to do in terms of processor
affinity.
Details:
* remove opal_paffinity_alone MCA param; restore mpi_paffinity_alone
MCA param
* move opal_paffinity_slot_list param registration to paffinity base
* ompi_mpi_init() calls opal_paffinity_base_slot_list_set(); if that
succeeds use that. If no slot list was set, see if
mpi_paffinity_alone was set. If so, bind this process to its Node
Local Rank (NLR). The NLR is the ORTE-maintained slot ID; if you
COMM_SPAWN to a host in this ORTE universe that already has procs
on it, the NLR for the new job will start at N (not 0). So this is
slightly better than mpi_paffinity_alone in the v1.2 series.
* If a slot list is specified *and* mpi_paffinity_alone is set, we
display an error and abort.
* Remove calls from rmaps/rank_file component to register and lookup
opal_paffinity mca params.
* Remove code in orte/odls that set affinities - instead, have them
just pass a slot_list if it exists.
* Cleanup the orte/odls code that determined
oversubscribed/want_processor as these were just opposites of each
other.
This commit was SVN r18874.
The following Trac tickets were found above:
Ticket 1383 --> https://svn.open-mpi.org/trac/ompi/ticket/1383
1. If we don't have the topology information, don't bother trying to
create cross-referencing information
1. Ensure to only check for valid processor ID's
This commit was SVN r18462.
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php
{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}
Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.
Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.
This commit was SVN r18381.
1. applied prefix rule to functions and variables of RMAPS rank_file component
2. cleaned ompi_mpi_init.c from paffinity code
3. paffinity code moved to new opal/mca/paffinity/base/paffinity_base_service.c file
4. added opal_paffinity_slot_list mca parameter
This commit was SVN r18019.
Greatly reduce the number of "foo" -> "opal_foo" symbol renames in the
libevent source, and instead greatly expand the event_rename.h file
that uses preprocessor macros to make all public symbols be
"opal_foo".
This commit was SVN r17923.
map_to_processor_id,
map_to_socket_core,
max_processor_id,
max_socket,
max_core.
In OS other then Linux, those functions will return OPAL_ERR_NOT_SUPPORTED.
--This Line, and those below, will be ignored--
M paffinity/linux/paffinity_linux_module.c
M paffinity/paffinity.h
M paffinity/base/base.h
M paffinity/base/paffinity_base_wrappers.c
M paffinity/windows/paffinity_windows_module.c
M paffinity/solaris/paffinity_solaris_module.c
This commit was SVN r17173.
about linkers, have all OPAL, ORTE, and OMPI components '''not'' link
against the OPAL, ORTE, or OMPI libraries.
See ttp://www.open-mpi.org/community/lists/users/2007/10/4220.php for
details (or https://svn.open-mpi.org/trac/ompi/wiki/Linkers for a
better-formatted version of the same info).
This commit was SVN r16968.
A subset of this patch needs to be applied to v1.2
Refs trac:928
This commit was SVN r15918.
The following Trac tickets were found above:
Ticket 928 --> https://svn.open-mpi.org/trac/ompi/ticket/928
Ensure that the AM_CONDITIONALs are ''always'' run, even if we
--enable-mca-no-build the paffinity/linux component.
This commit was SVN r15095.
The following Trac tickets were found above:
Ticket 1057 --> https://svn.open-mpi.org/trac/ompi/ticket/1057
re-enabling compilation of this component.
However, it still won't compile because this component provides a
module finalize function which apparently somehow got dropped from the
paffinity base. Support for the paffinity module finalize function
needs to be re-added.
This commit was SVN r14915.
* Enable VPATH builds to work (slight tweak of r14895 -- mainly
because I already had it done when George committed :-) )
* Enable "make dist" to work properly for PLPA included mode
* Update plpa.h.in
* Update svn:ignore
Took relevant changes back to the main PLPA SVN as well.
This commit was SVN r14896.
The following SVN revision numbers were found above:
r14895 --> open-mpi/ompi@bb7b04e875
Changes paffinity interface to use a cpu mask for available/preferred cpus
rather than the current coarse grained paffinity that lets the OS choose
which processor.
Macros for setting and clearing masks are provided.
Solaris and windows changes have not been made. Solaris subdirectory has some
suggested changes - however the relevant man pages for the Solaris 10 APIs
have some ambiguity regarding order in which one create and sets a processor
set. As we did not have access to a solaris 10 machine we could not test to
see the correct way to do the work under solaris.
This commit was SVN r14887.
Per discussions with Brian and Ralph, make a slight correction in
where components are installed. Use $pkglibdir, not $libdir/openmpi,
so that when compiled in the orte trunk, components are installed to
the right directory (because the component search patch is checking
$pkglibdir).
This commit was SVN r14345.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r14289
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
components that use configure.m4 for configuration or are always built.
The macro has not been needed since moving to configure types other than
configure.stub
Fixes trac:590
This commit was SVN r13031.
The following Trac tickets were found above:
Ticket 590 --> https://svn.open-mpi.org/trac/ompi/ticket/590
The same treatement will happens on all sub-projects. The .h files
have to be C++ compatibles and all symbols with an external visibility
have to get the {PROJECT}_DECLSPEC in front of the prototype.
This commit was SVN r11340.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
So define the constant if it isn't already defined. Something else
includes stdio.h, which has a bunch of declarations that really
confuse non-GNU compilers, so be sure to include that one before
setting __USE_GNU.
refs trac:280
This commit was SVN r11265.
The following Trac tickets were found above:
Ticket 280 --> https://svn.open-mpi.org/trac/ompi/ticket/280
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
- fall back to compile test for windows paffinity component
when cross compiling
- fall back to platform guess when checking for threads having
different pids with pthreads (yes on linux, no elsewhere)
- pass the proper host, target, and build flags to the
ROMIO configure script
With these changes, cross-compiling should be possible with the exception
of the Fortran 77 and Fortran 90 bindings. Fortran 77 can be cross-
compiled if cache values are provided for type sizes and alignment.
This commit was SVN r8702.
* turns out (duh!) that there was a reason that the <projectdir>dir
variable was set in the AM conditional. If not, stupid directories
are created and not needed... duh.
This commit was SVN r8205.
component/base Makefile.am files, reducing the time configure spends
stamping out Makefiles at the end
* Install base_impl.h file when devel-headers are being installed
This commit was SVN r8200.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
Makefile.options
- Sample in each of the three projects of how to link againt the
relevant libraries so that when components are loaded into a parent
process' space, we don't rely on the libopal/liborte/libmpi symbols
being in the parent's public symbol namespace -- instead,
dynamically link to the relevant libraries, allowing the dynamic
linker to pull those libraries in at run-time, if needed
This commit was SVN r7397.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
all the different cases (curses to RedHat for continually changing
the glibc API!)
- Minor fixes for the Solaris paffinity component
This commit was SVN r6894.
* Add base to memory framework so that we can do something sane with
ompi_info
* Updated ompi_info to print components for memory framework and
show whether we have memory hooks active or not.
This commit was SVN r6861.
- Simple components for getting and setting processor affinity of a
process; does *not* include scheduling decisions
- No one in the OMPI code base invokes the framework yet
- Added linux component for using sched_setaffinity()
- Added shell solaris component that will use processor_bind()
(currently .ompi_ignore'd)
This commit was SVN r6854.
