This commit adds a new MCA variable to set the location of the backing
store: osc_sm_backing_directory. The default on Linux has been
changed to use /dev/shm to improve performance in cases where /tmp is
not a tmpfs.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
If component selection fails, then module->bases might be unallocated
when ompi_osc_sm_free() in invoked, so test it before trying to free()
module->bases[0].
Thanks Martin Binder for the report.
Refs open-mpi/ompi#4770
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
This commit adds support for fetch-and-op atomics. This is needed
because and and or are irreversible operations so there needs to be a
way to get the old value atomically. These are also the only semantics
supported by C11 (there is not atomic_op_fetch, just
atomic_fetch_op). The old op-and-fetch atomics have been defined in
terms of fetch-and-op.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit renames the arithmetic atomic operations in opal to
indicate that they return the new value not the old value. This naming
differentiates these routines from new functions that return the old
value.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit eliminates the old opal_atomic_bool_cmpset functions. They
have been replaced by the opal_atomic_compare_exchange_strong
functions.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit renames the atomic compare-and-swap functions to indicate
the return value. This is in preperation for adding support for a
compare-and-swap that returns the old value. At the same time the
return type has been changed to bool.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit fixes a compile issue on 32-bit systems that do not
support 64-bit atomic math. The active target path was using 64-bit
atomics exclusively to support PSCW. This commit updates the code to
use either 32 or 64-bit atomic math depending on what is available.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* Resolves#3705
* Components should link against the project level library to better
support `dlopen` with `RTLD_LOCAL`.
* Extend the `mca_FRAMEWORK_COMPONENT_la_LIBADD` in the `Makefile.am`
with the appropriate project level library:
```
MCA components in ompi/
$(top_builddir)/ompi/lib@OMPI_LIBMPI_NAME@.la
MCA components in orte/
$(top_builddir)/orte/lib@ORTE_LIB_PREFIX@open-rte.la
MCA components in opal/
$(top_builddir)/opal/lib@OPAL_LIB_PREFIX@open-pal.la
MCA components in oshmem/
$(top_builddir)/oshmem/liboshmem.la"
```
Note: The changes in this commit were automated by the script in
the commit that proceeds it with the `libadd_mca_comp_update.py`
script. Some components were not included in this change because
they are statically built only.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
This commit moves the info subscribe for the blocking_fence to after
the global_state is allocated and moves setting win->w_osc_module to
before the info subscribe for alloc_shared_contig. This fixes a SEGV
caught by MTT.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The expected sequence of events for processing info during object creation
is that if there's an incoming info arg, it is opal_info_dup()ed into the obj
at obj->s_info first. Then interested components register callbacks for
keys they want to know about using opal_infosubscribe_infosubscribe().
Inside info_subscribe_subscribe() the specified callback() is called with
whatever matching k/v is in the object's info, or with the default. The
return string from the callback goes into the new k/v stored in info, and
the input k/v is saved as __IN_<key>/<val>. It's saved the same way
whether the input came from info or whether it was a default. A null return
from the callback indicates an ignored key/val, and no k/v is stored for
it, but an __IN_<key>/<val> is still kept so we still have access to the
original.
At MPI_*_set_info() time, opal_infosubscribe_change_info() is used. That
function calls the registered callbacks for each item in the provided info.
If the callback returns non-null, the info is updated with that k/v, or if
the callback returns null, that key is deleted from info. An __IN_<key>/<val>
is saved either way, and overwrites any previously saved value.
When MPI_*_get_info() is called, opal_info_dup_mpistandard() is used, which
allows relatively easy changes in interpretation of the standard, by looking
at both the <key>/<val> and __IN_<key>/<val> in info. Right now it does
1. includes system extras, eg k/v defaults not expliclty set by the user
2. omits ignored keys
3. shows input values, not callback modifications, eg not the internal values
Currently the callbacks are doing things like
return some_condition ? "true" : "false"
that is, returning static strings that are not to be freed. If the return
strings start becoming more dynamic in the future I don't see how unallocated
strings could support that, so I'd propose a change for the future that
the callback()s registered with info_subscribe_subscribe() do a strdup on
their return, and we change the callers of callback() to free the strings
it returns (there are only two callers).
Rough outline of the smaller changes spread over the less central files:
comm.c
initialize comm->super.s_info to NULL
copy into comm->super.s_info in comm creation calls that provide info
OBJ_RELEASE comm->super.s_info at free time
comm_init.c
initialize comm->super.s_info to NULL
file.c
copy into file->super.s_info if file creation provides info
OBJ_RELEASE file->super.s_info at free time
win.c
copy into win->super.s_info if win creation provides info
OBJ_RELEASE win->super.s_info at free time
comm_get_info.c
file_get_info.c
win_get_info.c
change_info() if there's no info attached (shouldn't happen if callbacks
are registered)
copy the info for the user
The other category of change is generally addressing compiler warnings where
ompi_info_t and opal_info_t were being used a little too interchangably. An
ompi_info_t* contains an opal_info_t*, at &(ompi_info->super)
Also this commit updates the copyrights.
Signed-off-by: Mark Allen <markalle@us.ibm.com>
ompi_communicator_t, ompi_win_t, ompi_file_t all have a super class of type opal_infosubscriber_t instead of a base/super type of opal_object_t (in previous code comm used c_base, but file used super). It may be a bit bold to say that being a subscriber of MPI_Info is the foundational piece that ties these three things together, but if you object, then I would prefer to turn infosubscriber into a more general name that encompasses other common features rather than create a different super class. The key here is that we want to be able to pass comm, win and file objects as if they were opal_infosubscriber_t, so that one routine can heandle all 3 types of objects being passed to it.
MPI_INFO_NULL is still an ompi_predefined_info_t type since an MPI_Info is part of ompi but the internal details of the underlying information concept is part of opal.
An ompi_info_t type still exists for exposure to the user, but it is simply a wrapper for the opal object.
Routines such as ompi_info_dup, etc have all been moved to opal_info_dup and related to the opal directory.
Fortran to C translation tables are only used for MPI_Info that is exposed to the application and are therefore part of the ompi_info_t and not the opal_info_t
The data structure changes are primarily in the following files:
communicator/communicator.h
ompi/info/info.h
ompi/win/win.h
ompi/file/file.h
The following new files were created:
opal/util/info.h
opal/util/info.c
opal/util/info_subscriber.h
opal/util/info_subscriber.c
This infosubscriber concept is that communicators, files and windows can have subscribers that subscribe to any changes in the info associated with the comm/file/window. When xxx_set_info is called, the new info is presented to each subscriber who can modify the info in any way they want. The new value is presented to the next subscriber and so on until all subscribers have had a chance to modify the value. Therefore, the order of subscribers can make a difference but we hope that there is generally only one subscriber that cares or modifies any given key/value pair. The final info is then stored and returned by a call to xxx_get_info.
The new model can be seen in the following files:
ompi/mpi/c/comm_get_info.c
ompi/mpi/c/comm_set_info.c
ompi/mpi/c/file_get_info.c
ompi/mpi/c/file_set_info.c
ompi/mpi/c/win_get_info.c
ompi/mpi/c/win_set_info.c
The current subscribers where changed as follows:
mca/io/ompio/io_ompio_file_open.c
mca/io/ompio/io_ompio_module.c
mca/osc/rmda/osc_rdma_component.c (This one actually subscribes to "no_locks")
mca/osc/sm/osc_sm_component.c (This one actually subscribes to "blocking_fence" and "alloc_shared_contig")
Signed-off-by: Mark Allen <markalle@us.ibm.com>
Conflicts:
AUTHORS
ompi/communicator/comm.c
ompi/debuggers/ompi_mpihandles_dll.c
ompi/file/file.c
ompi/file/file.h
ompi/info/info.c
ompi/mca/io/ompio/io_ompio.h
ompi/mca/io/ompio/io_ompio_file_open.c
ompi/mca/io/ompio/io_ompio_file_set_view.c
ompi/mca/osc/pt2pt/osc_pt2pt.h
ompi/mca/sharedfp/addproc/sharedfp_addproc.h
ompi/mca/sharedfp/addproc/sharedfp_addproc_file_open.c
ompi/mca/topo/treematch/topo_treematch_dist_graph_create.c
ompi/mpi/c/lookup_name.c
ompi/mpi/c/publish_name.c
ompi/mpi/c/unpublish_name.c
opal/mca/mpool/base/mpool_base_alloc.c
opal/util/Makefile.am
since Open MPI now requires a C99, and ptrdiff_t type is part of C99,
there is no more need for the abstract OPAL_PTRDIFF_TYPE type.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
As we changed the ABI (forcing a major release), we can limit
the size of the predefined communicators by moving the collective
structure outside the communicator. This might have a minimal,
but unnoticeable, impact on performance. This approach has been
discussed during the January 2017 devel meeting.
Signed-off-by: George Bosilca <bosilca@icl.utk.edu>
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
add padding so the memory allocated by MPI_Win_allocate_shared()
is 64 bytes aligned.
Thanks Joseph Schuchart for the bug report
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
This commit expands the OPAL_THREAD macros to include 32- and 64-bit
atomic swap. Additionally, macro declararations have been updated to
include both OPAL_THREAD_* and OPAL_ATOMIC_*. Before this commit the
former was used with add and the later with cmpset.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
A bus error occurs in sm OSC under the following conditions.
- sparc64 or any other architectures which need strict alignment.
- `MPI_WIN_POST` or `MPI_WIN_START` is called for a window created
by sm OSC.
- The communicator size is odd and greater than 3.
The lines 283-285 in current `ompi/mca/osc/sm/osc_sm_component.c` has
the following code.
```c
module->global_state = (ompi_osc_sm_global_state_t *) (module->segment_base);
module->node_states = (ompi_osc_sm_node_state_t *) (module->global_state + 1);
module->posts[0] = (uint64_t *) (module->node_states + comm_size);
```
The size of `ompi_osc_sm_node_state_t` is multiples of 4 but not
multiples of 8. So if `comm_size` is odd, `module->posts[0]` does
not aligned to 8. This causes a bus error when accessing
`module->posts[i][j]`.
This patch fixes the alignment of `module->posts[0]` by setting
`module->posts[0]` first.
`MPI_WIN_TEST` must update the `flag` parameter to 0 when not all
origin processes called `MPI_WIN_COMPLETE`. But sm OSC doesn't.
If the caller initialize the `flag` argument to a non-0 value,
the caller will receive the non-0 `flag` value.
The osc/sm component was using a simple counter to determine if all
expected posts had arrived to start a PSCW access epoch. This is
incorrect as a post may arrive from a peer that isn't part of the
current start group. There are many ways this could have been fixed.
This commit adds an n^2 bitmap. When a process posts it sets a bit in
the bitmap associated with the access rank to indicate the post is
complete. The access rank checks for and clears the bits associated
with all the processes in the start group.
The bitmap requires comm_size ^ 2 bits of space. This should be
managable as most nodes have relatively small numbers of processes. If
this changes another algorigthm can be implemented.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
- MPI_Compare_and_swap
- MPI_Fetch_and_op
- MPI_Raccumulate
- MPI_Win_detach
Thanks to Michael Knobloch and Takahiro Kawashima for bringing this
to our attention
Based on some on-list and IM discussion with @hjelmn about
open-mpi/ompi@40b7643119, change the testing to a switch/case. If we
fall into the default case, assert() error (because it's an OMPI
developer programming error).
Use of the old ompi_free_list_t and ompi_free_list_item_t is
deprecated. These classes will be removed in a future commit.
This commit updates the entire code base to use opal_free_list_t and
opal_free_list_item_t.
Notes:
OMPI_FREE_LIST_*_MT -> opal_free_list_* (uses opal_using_threads ())
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds an owner file in each of the component directories
for each framework. This allows for a simple script to parse
the contents of the files and generate, among other things, tables
to be used on the project's wiki page. Currently there are two
"fields" in the file, an owner and a status. A tool to parse
the files and generate tables for the wiki page will be added
in a subsequent commit.
Initialize the blocking_fence flag to false as the code logic indicates that it should only be set if someone provides that flag.
Thanks to Lisandro Dalcin for reporting it
cmr=v1.8.4:reviewer=hjelmn
This commit was SVN r32812.
WHAT: Open our low-level communication infrastructure by moving all necessary components (btl/rcache/allocator/mpool) down in OPAL
All the components required for inter-process communications are currently deeply integrated in the OMPI layer. Several groups/institutions have express interest in having a more generic communication infrastructure, without all the OMPI layer dependencies. This communication layer should be made available at a different software level, available to all layers in the Open MPI software stack. As an example, our ORTE layer could replace the current OOB and instead use the BTL directly, gaining access to more reactive network interfaces than TCP. Similarly, external software libraries could take advantage of our highly optimized AM (active message) communication layer for their own purpose. UTK with support from Sandia, developped a version of Open MPI where the entire communication infrastucture has been moved down to OPAL (btl/rcache/allocator/mpool). Most of the moved components have been updated to match the new schema, with few exceptions (mainly BTLs where I have no way of compiling/testing them). Thus, the completion of this RFC is tied to being able to completing this move for all BTLs. For this we need help from the rest of the Open MPI community, especially those supporting some of the BTLs. A non-exhaustive list of BTLs that qualify here is: mx, portals4, scif, udapl, ugni, usnic.
This commit was SVN r32317.
Brad correctly pointed out that the total window size should not be an
int. Changed it to an unsigned long.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32010.
Only one field is valid for RMA requests: MPI_ERROR. This field is set
to the correct value in ompi_request_empty so there is no reason to
allocate and keep track of osc/sm requests because they are always
complete on return. Since we are no longer using the osc/sm request
structure or free list they are now removed.
Closes trac:4723
Tracking this issue with the CMR. Brad, can you verify the issue is indeed fixed.
cmr=v1.8.2:reviewer=bbenton
This commit was SVN r32009.
The following Trac tickets were found above:
Ticket 4723 --> https://svn.open-mpi.org/trac/ompi/ticket/4723
While testing one-sided on LANL systems I found a couple more OSC
bugs that were not caught during the initial testing:
- In the passive target code we read the read lock count as a
char instead of the intended uint32_t. This causes lock to
lockup when using shared locks after 127 iterations.
- The post code used the wrong group when trying to increment post
counters. This causes a segmentation fault.
- Both the post and wait code used the wrong check in the inner
loop leading to an infinite loop.
cmr=v1.8.1:reviewer=jsquyres
This commit was SVN r31354.
Fixed two bugs:
- Use module->comm NOT comm to get the CID for the shared memory backing
file. This fixes the case where there are multiple shared memory windows
at the same time.
- Remember to unlink the shared memory backing file.
Refs trac:4438
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31227.
The following Trac tickets were found above:
Ticket 4438 --> https://svn.open-mpi.org/trac/ompi/ticket/4438
Dave Goodell correctly pointed out that it is unusual to return MPI
error classes from internal ompi functions. Correct this in the RMA
case by adding an internal error code to match MPI_ERR_RMA_SYNC.
This does change OMPI_ERR_MAX. I don't think this will cause any
problems with ABI.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31012.
