http://www.open-mpi.org/community/lists/devel/2014/04/14496.php
Revamp the opal database framework, including renaming it to "dstore" to reflect that it isn't a "database". Move the "db" framework to ORTE for now, soon to move to ORCM
This commit was SVN r31557.
The problem arises when a hostfile is used, and the user provides host names without specifying the slots= paramater. In these cases, we assign slots=1, but automatically allow oversubscription since that number isn't confirmed. We then provide a separate parameter by which the user can direct that we assign the number of slots based on the sensed hardware - e.g., by telling us to set the #slots equal to the #cores on each node. However, this has been set to "off" by default.
In order to make this a little less complex for the user, set the default such that we automatically set #slots equal to #cores (or #hwt's if use_hwthreads_as_cpus has been set) only for those cases where the user provides names in a hostfile but does not provide slot information.
Also cleanup some a couple of issues in the mapping/binding system:
* ensure we only override the binding directive if we are oversubscribed *and* overload is not allowed
* ensure that the MPI procs don't attempt to bind themselves if they are launched by an orted as any binding directive (no matter what it was) would have been serviced by the orted on launch
* minor cleanup to the warning message when oversubscribed and binding was requested
cmr=v1.7.5:reviewer=rhc:subject=update mapping/binding system
This commit was SVN r30909.
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
Thanks to Tim Miller for reporting the regression from the 1.6 series
cmr=v1.7.4:reviewer=jsquyres:subject=Ensure that comm_spawn'd procs get user-specified forwarded envars
This commit was SVN r30012.
This isn't being used yet - just enabling Nathan to do what he needs.
***** NOTE: any use of the OMPI_DB_GLOBAL_RANK database key must be protected by #ifdef OMPI_DB_GLOBAL_RANK as not all RTE's will define this key. *****
This commit was SVN r29708.
Resolves problems in loop_spawn where the timer was incorrectly firing and killing the overall job.
cmr=v1.7.4:reviewer=hjelmn
This commit was SVN r29661.
This change contains a non-mandatory modification
of the MPI-RTE interface. Anyone wishing to support
coprocessors such as the Xeon Phi may wish to add
the required definition and underlying support
****************************************************************
Add locality support for coprocessors such as the Intel Xeon Phi.
Detecting that we are on a coprocessor inside of a host node isn't straightforward. There are no good "hooks" provided for programmatically detecting that "we are on a coprocessor running its own OS", and the ORTE daemon just thinks it is on another node. However, in order to properly use the Phi's public interface for MPI transport, it is necessary that the daemon detect that it is colocated with procs on the host.
So we have to split the locality to separately record "on the same host" vs "on the same board". We already have the board-level locality flag, but not quite enough flexibility to handle this use-case. Thus, do the following:
1. add OPAL_PROC_ON_HOST flag to indicate we share a host, but not necessarily the same board
2. modify OPAL_PROC_ON_NODE to indicate we share both a host AND the same board. Note that we have to modify the OPAL_PROC_ON_LOCAL_NODE macro to explicitly check both conditions
3. add support in opal/mca/hwloc/base/hwloc_base_util.c for the host to check for coprocessors, and for daemons to check to see if they are on a coprocessor. The former is done via hwloc, but support for the latter is not yet provided by hwloc. So the code for detecting we are on a coprocessor currently is Xeon Phi specific - hopefully, we will find more generic methods in the future.
4. modify the orted and the hnp startup so they check for coprocessors and to see if they are on a coprocessor, and have the orteds pass that info back in their callback message. Automatically detect that coprocessors have been found and identify which coprocessors are on which hosts. Note that this algo isn't scalable at the moment - this will hopefully be improved over time.
5. modify the ompi proc locality detection function to look for coprocessor host info IF the OMPI_RTE_HOST_ID database key has been defined. RTE's that choose not to provide this support do not have to do anything - the associated code will simply be ignored.
6. include some cleanup of the hwloc open/close code so it conforms to how we did things in other frameworks (e.g., having a single "frame" file instead of open/close). Also, fix the locality flags - e.g., being on the same node means you must also be on the same cluster/cu, so ensure those flags are also set.
cmr:v1.7.4:reviewer=hjelmn
This commit was SVN r29435.
So we now allow singletons to start on their own, only spawning an HNP when initiating an operation that actually requires it.
cmr:v1.7.4:reviewer=jsquyres
This commit was SVN r29354.
Create a new required key in the OMPI layer for retrieving a "node id" from the database. ALL RTE'S MUST DEFINE THIS KEY. This allows us to compute locality in the MPI layer, which is necessary when we do things like intercomm_create.
cmr:v1.7.4:reviewer=rhc:subject=Cleanup handling of modex data
This commit was SVN r29274.
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***
Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.
***************************************************************************************
I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.
The code is in https://bitbucket.org/rhc/ompi-oob2
WHAT: Rewrite of ORTE OOB
WHY: Support asynchronous progress and a host of other features
WHEN: Wed, August 21
SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:
* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)
* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.
* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients
* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort
* only one transport (i.e., component) can be "active"
The revised OOB resolves these problems:
* async progress is used for all application processes, with the progress thread blocking in the event library
* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")
* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.
* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.
* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object
* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions
* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel
* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport
* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active
* all blocking send/recv APIs have been removed. Everything operates asynchronously.
KNOWN LIMITATIONS:
* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline
* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker
* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways
* obviously, not every error path has been tested nor necessarily covered
* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.
* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways
* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC
This commit was SVN r29058.
So shift the cutoff param to the MPI layer, and have it solely determine whether or not we call modex_recv on the hostname. If comm_world is of size greater than the cutoff, then we don't automatically retrieve the hostname when we build the ompi_proc_t for a process - instead, we fill the hostname entry on first call to modex_recv for that process.
The param is now "ompi_hostname_cutoff=N", where N=number of procs for cutoff.
Refs trac:3729
This commit was SVN r29056.
The following Trac tickets were found above:
Ticket 3729 --> https://svn.open-mpi.org/trac/ompi/ticket/3729
* add a new MCA param orte_hostname_cutoff to specify the number of nodes at which we stop including hostnames. This defaults to INT_MAX => always include hostnames. If a value is given, then we will include hostnames for any allocation smaller than the given limit.
* remove ompi_proc_get_hostname. Replace all occurrences with a direct link to ompi_proc_t's proc_hostname, protected by appropriate "if NULL"
* modify the OMPI-ORTE integration component so that any call to modex_recv automatically loads the ompi_proc_t->proc_hostname field as well as returning the requested info. Thus, any process whose modex info you retrieve will automatically receive the hostname. Note that on-demand retrieval is still enabled - i.e., if we are running under direct launch with PMI, the hostname will be fetched upon first call to modex_recv, and then the ompi_proc_t->proc_hostname field will be loaded
* removed a stale MCA param "mpi_keep_peer_hostnames" that was no longer used anywhere in the code base
* added an envar lookup in ess/pmi for the number of nodes in the allocation. Sadly, PMI itself doesn't provide that info, so we have to get it a different way. Currently, we support PBS-based systems and SLURM - for any other, rank0 will emit a warning and we assume max number of daemons so we will always retain hostnames
This commit was SVN r29052.
There is no good way to recover from this scenario, and from past experience, using the user's name in the session directory (as opposed to the uid) is very helpful when things go wrong. So print a help message when this happens (it is extremely rare, but has happened at least once now) and return an error.
cmr:v1.7.3,reviewer=jsquyres
cmr:v1.6.5,reviewer=jsquyres
This commit was SVN r28658.
Notes:
- This commit also eliminates the need for an available components list in use
in several frameworks. None of the code in question was making use of the
priority field of the priority component list item so these extra lists were
removed.
- Cleaned up selection code in several frameworks to sort lists using opal_list_sort.
- Cleans up the ompi/orte-info functions. Expose the functions that construct the
list of params so they can be used elsewhere.
patches for mtl/portals4 from brian
missed a few output variables in openib
This commit was SVN r28241.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
A few changes were required to support this move:
1. the PMI component used to identify rte-related data (e.g., host name, bind level) and package them as a unit to reduce the number of PMI keys. This code was moved up to the ORTE layer as the OPAL layer has no understanding of these concepts. In addition, the component locally stored data based on process jobid/vpid - this could no longer be supported (see below for the solution).
2. the hash component was updated to use the new opal_identifier_t instead of orte_process_name_t as its index for storing data in the hash tables. Previously, we did a hash on the vpid and stored the data in a 32-bit hash table. In the revised system, we don't see a separate "vpid" field - we only have a 64-bit opaque value. The orte_process_name_t hash turned out to do nothing useful, so we now store the data in a 64-bit hash table. Preliminary tests didn't show any identifiable change in behavior or performance, but we'll have to see if a move back to the 32-bit table is required at some later time.
3. the db framework was a "select one" system. However, since the PMI component could no longer use its internal storage system, the framework has now been changed to a "select many" mode of operation. This allows the hash component to handle all internal storage, while the PMI component only handles pushing/pulling things from the PMI system. This was something we had planned for some time - when fetching data, we first check internal storage to see if we already have it, and then automatically go to the global system to look for it if we don't. Accordingly, the framework was provided with a custom query function used during "select" that lets you seperately specify the "store" and "fetch" ordering.
4. the ORTE grpcomm and ess/pmi components, and the nidmap code, were updated to work with the new db framework and to specify internal/global storage options.
No changes were made to the MPI layer, except for modifying the ORTE component of the OMPI/rte framework to support the new db framework.
This commit was SVN r28112.
