This commit reverted pr #6199 as it introduced deadlock in some cases.
Also removed the assert as the condition is obsoleted.
Signed-off-by: Thananon Patinyasakdikul <tpatinya@utk.edu>
PR #5241 provided an MCA variable to allow multi-threaded opal_progress.
However, it allowed to update the linked list even when multiple threads was
allowed to call opal_progress. This caused a scenario when a more recent thread
could complete it's progress and fail the assert(sync ==
wait_sync_list).
Allowing to update the linked list only for the case when the number of threads
exceeds the threshold fixes the problem.
Signed-off-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@intel.com>
This commit added MCA param `opal_max_thread_in_progress` to set the
number of threads allowed to do opal_progress concurrently. The default
value is 1.
Component with multithreaded design can benefit from this change to
parallelize their component progress function.
Signed-off-by: Thananon Patinyasakdikul <tpatinya@utk.edu>
This commit disables the use of both the builtin and hand-written
atomics if proper C11 atomic support is detected. This is the first
step towards requiring the availability of C11 atomics for the C
compiler used to build Open MPI.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit updates the entire codebase to use specific opal types for
all atomic variables. This is a change from the prior atomic support
which required the use of the volatile keyword. This is the first step
towards implementing support for C11 atomics as that interface
requires the use of types declared with the _Atomic keyword.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
configure: add checks for `__thread` on top of current check for `_Thread_local` and define OPAL_HAVE_THREAD_LOCAL if the compiler support TLS.
Added `opal_thread_local` keyword to unify the definition.
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
This commit adds support for fetch-and-op atomics. This is needed
because and and or are irreversible operations so there needs to be a
way to get the old value atomically. These are also the only semantics
supported by C11 (there is not atomic_op_fetch, just
atomic_fetch_op). The old op-and-fetch atomics have been defined in
terms of fetch-and-op.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit renames the arithmetic atomic operations in opal to
indicate that they return the new value not the old value. This naming
differentiates these routines from new functions that return the old
value.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit eliminates the old opal_atomic_bool_cmpset functions. They
have been replaced by the opal_atomic_compare_exchange_strong
functions.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds a new set of compare-and-exchange functions. These
functions have a signature similar to the functions found in C11. The
old cmpset functions are now deprecated and defined in terms of the
new compare-and-exchange functions. All asm backends have been
updated.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit renames the atomic compare-and-swap functions to indicate
the return value. This is in preperation for adding support for a
compare-and-swap that returns the old value. At the same time the
return type has been changed to bool.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit adds additional atomics math operations that are needed
throughout the codebase. The semantics of the new operations are
consistent with the existing atomics (op then fetch).
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
Passed the below set of symbols into a script that added ompi_ to them all.
Note that if processing a symbol named "foo" the script turns
foo into ompi_foo
but doesn't turn
foobar into ompi_foobar
But beyond that the script is blind to C syntax, so it hits strings and
comments etc as well as vars/functions.
coll_base_comm_get_reqs
comm_allgather_pml
comm_allreduce_pml
comm_bcast_pml
fcoll_base_coll_allgather_array
fcoll_base_coll_allgatherv_array
fcoll_base_coll_bcast_array
fcoll_base_coll_gather_array
fcoll_base_coll_gatherv_array
fcoll_base_coll_scatterv_array
fcoll_base_sort_iovec
mpit_big_lock
mpit_init_count
mpit_lock
mpit_unlock
netpatterns_base_err
netpatterns_base_verbose
netpatterns_cleanup_narray_knomial_tree
netpatterns_cleanup_recursive_doubling_tree_node
netpatterns_cleanup_recursive_knomial_allgather_tree_node
netpatterns_cleanup_recursive_knomial_tree_node
netpatterns_init
netpatterns_register_mca_params
netpatterns_setup_multinomial_tree
netpatterns_setup_narray_knomial_tree
netpatterns_setup_narray_tree
netpatterns_setup_narray_tree_contigous_ranks
netpatterns_setup_recursive_doubling_n_tree_node
netpatterns_setup_recursive_doubling_tree_node
netpatterns_setup_recursive_knomial_allgather_tree_node
netpatterns_setup_recursive_knomial_tree_node
pml_v_output_close
pml_v_output_open
intercept_extra_state_t
odls_base_default_wait_local_proc
_event_debug_mode_on
_evthread_cond_fns
_evthread_id_fn
_evthread_lock_debugging_enabled
_evthread_lock_fns
cmd_line_option_t
cmd_line_param_t
crs_base_self_checkpoint_fn
crs_base_self_continue_fn
crs_base_self_restart_fn
event_enable_debug_output
event_global_current_base_
event_module_include
eventops
sync_wait_mt
trigger_user_inc_callback
var_type_names
var_type_sizes
Signed-off-by: Mark Allen <markalle@us.ibm.com>
When Java bindings are used, MPI_Init() is not invoked
by the main thread, and this causes some keys being destructed twice.
Reset the per thread values to NULL in order to correctly handle this
Fixesopen-mpi/ompi#2811
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
there is no such thing as pthread_join(main_thread), so key destructors
are never invoked on the main thread, which causes valgrind report
some memory leaks. Manually store and then invoke the key destructors and
make valgrind happy.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Prevent a race condition between a thread checking count and then
going in cond_wait, and another thread setting the count to 0 and
signaling the condition.
Thanks to Pascal Deveze for catching up the bug and for
the initial patch.
WAIT_SYNC_INIT(sync,0); WAIT_SYNC_RELEASE(sync);
hanged because sync->signaled was initialised to true, and
there is no reason to invoke WAIT_SYNC_SIGNALED(sync) before
WAIT_SYNC_RELEASE(sync)
this commit initializes sync->signaled to true unless the count is zero.
Thanks George for the review and guidance.
This commit expands the OPAL_THREAD macros to include 32- and 64-bit
atomic swap. Additionally, macro declararations have been updated to
include both OPAL_THREAD_* and OPAL_ATOMIC_*. Before this commit the
former was used with add and the later with cmpset.
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit adds opal_using_threads() protection around the atomic
operation in OBJ_RETAIN/OBJ_RELEASE. This resolves the performance
issues seen when running psm with MPI_THREAD_SINGLE.
To avoid issues with header dependencies opal_using_threads() has been
moved to a new header (thread_usage.h). The OPAL_THREAD_ADD* and
OPAL_THREAD_CMPSET* macros have also been relocated to this header.
This commit is cherry-picked off a fix that was submitted for the v1.8
release series but never applied to master. This fixes part of the
problem reported by @nysal in #1902.
(cherry picked from commit open-mpi/ompi-release@ce91307918)
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
This commit fixes a race condition discovered by @artpol84. The race
happens when a signalling thread decrements the sync count to 0 then
goes to sleep. If the waiting thread runs and detects the count == 0
before going to sleep on the condition variable it will destroy the
condition variable while the signalling thread is potentially still
processing the completion. The fix is to add a non-atomic member to
the sync structure that indicates another process is handling
completion. Since the member will only be set to false by the
initiating thread and the completing thread the variable does not need
to be protected. When destoying a condition variable the waiting
thread needs to wait until the singalling thread is finished.
Thanks to @artpol84 for tracking this down.
Fixes#1813
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The OPAL_ENABLE_MULTI_THREADS macro is always defined as 1. This was
causing us to always use the multi-thread path for synchronization
objects. The code has been updated to use the opal_using_threads()
function. When MPI_THREAD_MULTIPLE support is disabled at build time
(2.x only) this function is a macro evaluating to false so the
compiler will optimize out the MT-path in this case. The
OPAL_ATOMIC_ADD_32 macro has been removed and replaced by the existing
OPAL_THREAD_ADD32 macro.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
* Remodel the request.
Added the wait sync primitive and integrate it into the PML and MTL
infrastructure. The multi-threaded requests are now significantly
less heavy and less noisy (only the threads associated with completed
requests are signaled).
* Fix the condition to release the request.
This commit removes the --with-mpi-thread-multiple option and forces
MPI_THREAD_MULTIPLE support. This cleans up an abstration violation
in opal where OMPI_ENABLE_THREAD_MULTIPLE determines whether the
opal_using_threads is meaningful. To reduce the performance hit on
MPI_THREAD_SINGLE programs an OPAL_UNLIKELY is used for the
check on opal_using_threads in OPAL_THREAD_* macros.
This commit does not clean up the arguments to the various functions
that take whether muti-threading support is enabled. That should be
done at a later time.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This new class is the same as the opal_mutex_t class but has a
different constructor. This constructor adds the recursive flag to the
mutex attributes for the lock. This class can be used where there may
be re-enty into the lock from within the same thread.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit does two things. It removes checks for C99 required
headers (stdlib.h, string.h, signal.h, etc). Additionally it removes
definitions for required C99 types (intptr_t, int64_t, int32_t, etc).
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
These two macros set the prefix for the OPAL and ORTE libraries,
respectively. Specifically, the OPAL library will be named
libPREFIXopen-pal.la and the ORTE library will be named
libPREFIXopen-rte.la.
These macros must be called, even if the prefix argument is empty.
The intent is that Open MPI will call these macros with an empty
prefix, but other projects (such as ORCM) will call these macros with
a non-empty prefix. For example, ORCM libraries can be named
liborcm-open-pal.la and liborcm-open-rte.la.
This scheme is necessary to allow running Open MPI applications under
systems that use their own versions of ORTE and OPAL. For example,
when running MPI applications under ORTE, if the ORTE and OPAL
libraries between OMPI and ORCM are not identical (which, because they
are released at different times, are likely to be different), we need
to ensure that the OMPI applications link against their ORTE and OPAL
libraries, but the ORCM executables link against their ORTE and OPAL
libraries.
the OPAL and ORTE libraries. This is required by projects such as ORCM
that have their own ORTE and OPAL libraries in order to avoid library
confusion. By renaming their version of the libraries, the OMPI
applications can correctly dynamically load the correct one for their
build."
This reverts commit 63f619f871.
more:
- Remove OPAL_ENABLE_MULTI_THREADS, since it didn't really do anything
correctly. Opal always has threads enabled at this point.
- Remove OMPI_ENABLE_PROGRESS_THREADS, since this hasn't worked in
8 years and it has performance issues we'll never be able to
overcome. Note that we have plans for re-adding async progress, using
a hybrid protocol of async and sync sends.
- OMPI_ENABLE_THREAD_MULTIPLE now determines whether the thread lock
macros do the check or not.
- Condition variables are ALWAYS polling right now, which fixes the thread
live-lock currently found when THREAD_MULTIPLE is turned on.
This commit was SVN r29891.
