It's still not very clean as we still lock the mvapi_btl mutex inside a critical section
protected by the endpoint mutex ...
This commit was SVN r8810.
- Remove printing of CFLAGS in configure.m4
- Set MCA_BTL_FLAGS_SEND flag
- Improved error handling during module initialization
- Extract the address of each interface with dat_ia_query
- Start playing around with fragment stuff - probably wrong
- Misc code cleanup (removal of GM-specific code)
This commit was SVN r8801.
- Move mca_btl_udapl_error/mca_btl_module_init to mca_btl_udapl.c and rename it
- White space cleanups
- Free the uDAPL evd and ia handles in mca_btl_udapl_finalize
This commit was SVN r8705.
- Borrow configure.m4 from the mvapi btl. One of the uDAPL headers emits a
warning when -pedantic is enabled, so strip it out.
- Change function check in ompi_check_dapl.m4 from dat_ia_open to
dat_registry_list_providers.. dat_ia_open wasn't working right
- Make the references to prepare_dst, put, and get NULL for now
- Add opal_output() calls in all the udapl interface functions for debugging
- Add evd_qlen component parameter to control event dispatcher queue length
- First stab at component_init and module_init
- Misc cleanups - whitespace, dead code removal
- Update copyrights to 2006
This commit was SVN r8701.
On some systems (like windows) qsort can modify the order of modules when the
comparaison function return 0. As we expect to have the
mca_btl_sm_add_procs_same_base_addr called before mca_btl_sm_add_procs we have
force the qsort to return the SM modules in the correct order. Giving to the
same_addr module a slightly higher priority solve this problem.
This commit was SVN r8620.
- Copied the template BTL and renamed everything
- Compiles and shows up correctly in ompi_info, not tested past that
- Should be ignored for everyone but me
This commit was SVN r8544.
empty for non threaded builds, but somehow just by moving the code a
little bit around and removing 2 call to lock/unlock the latency for TCP
went down by 2 micro-seconds ...
This commit was SVN r8426.
number of recv system call by caching the data. Each endpoint has a buffer
(the size is an MCA parameter) that can be use as a cache. Before each receive
operation this buffer is added at the end of the iovec list. All data that are
not expected by the fragment will go in this cache. If the cache contain data
all subsequent receive will just memcpy the data into the BTL buffers.
The only drawback is that we will spin around the receive_handle until all the
cached data is readed by the PML layer. This limitation come from the fact that
the event library is unable to call us if there is no events on the socket.
Therefore we are unable to keep the data in the cache until the next loop
into the progress engine.
This commit was SVN r8398.
increase the previous connection code was broken. It can take as much as 60 seconds to connect
64 processes. Now we do not create the connections when we add the procs but only when we send
them the first message. Now it take only 1.6 seconds to setup a 64 procs MPI job over MX (doing a 2 steps barrier in order to insure that we create all the connections).
This commit was SVN r8252.
* turns out (duh!) that there was a reason that the <projectdir>dir
variable was set in the AM conditional. If not, stupid directories
are created and not needed... duh.
This commit was SVN r8205.
component/base Makefile.am files, reducing the time configure spends
stamping out Makefiles at the end
* Install base_impl.h file when devel-headers are being installed
This commit was SVN r8200.
is labeled as internal so the users will not see it but it is not read-only so we can still
play with it (that's for our internal tests). This is supposed to dissapear later after the
next (or next next) release of the MX library, but we need it now as a quick fix before the
release.
This commit was SVN r8161.
- Add big comment about a general overview of what the sm btl is doing
- random small code cleanups
- fix instances of mca_btl_sm[0] to mca_btl_sm[1] where relevant
- remove a lot of unused, confusing, and incorrect interface functions
from ompi_fifo.h and ompi_circular_buffer.h. These functions, if
they were used, would not work properly with the scheme that the sm
btl uses with the fifos (i.e., receiver makes right -- if necessary)
- add some missing offset computations in the fifo and circular buffers
- change the types of offsets to be ssize_t, not size_t
- remove an offset parameter from a function that didn't need it
This commit was SVN r8135.
- Ensure to convert base_shared_mem_flags to be a relative offset in
the global storage, and then to convert that back to an absolute
virtual address before we try to use it
- Don't double increment n_local_procs when calculating the peer rank
during bootstrapping of the different base address case
Something else is still wrong; if mmap() returns a different base
address, things don't work (i.e., segv or hang forever when you try to
send a message). More specifically, the bootstrapping now seems to
correctly handle the case when mmap() base addresses are different,
but the message passing does *not* -- it always assumes that the
mmap() base addresses are the same.
Still working on the fix for that -- want to checkpoint what has been
done so far to facilitate working on different machines...
This commit was SVN r8134.
- first we setup the connections in the begining with all the peers
- MX does not handle well the case where several peers make connections to the same
destination simultaneously.
So I change the order in which we connect. First we compute our rank in the array,
then in a round-robin fashion we setup connection starting with our left neighboard.
This commit was SVN r8075.
larger than 32K for inter-nodes transfert ... and then they do not support iovecs larger than
16K for inter-node transfert. Therefore we have to set the size of our first fragment to
16K to match both cases.
This commit was SVN r7926.
to be supported by mellanox vapi.. perhaps this will be supported in the near
future, for now it doesn't hurt to have it in the trunk
Also cleanup the receive descriptor posting macro's..
This commit was SVN r7903.
Note, we are failing the ring tests in the intel p2p test suite, but we seem
to fail the same tests under the current trunk.. will look into this further.
This commit was SVN r7823.
memory initialization, call opal_progress() to push any pending events
around and possibly yield the processor if nothing entertaining is happening.
This should probably go to the 1.0 branch.
This commit was SVN r7808.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
on others as an char*. Thus the right side of all assignment should be explicitly casted to an void* in
order to avoid any casting complaints from the compilers.
This commit was SVN r7607.
On thor, if IB is down, we get NULL back from ibv_get_devices(), which then
caused segfaults in dlist_start().
* Pretty-print error message if no HCAs found
This commit was SVN r7557.
any NICs to use
* Make mvapi, gm, and mx components all publish information, even if there
are no NICs available so that modex_recv doesn't hang. If there are no
NICs available, don't set the reachable bit, but don't do anything
to fail. This unfortunately doesn't cover the hangs that will result if
different procs load different sets of components, but it's a start
This commit was SVN r7550.
Try to detect which form this version of Open IB uses, defaulting to the 5
version if we can't figure it out (the new version has 5 params)
* Only add -lcm if it exists on the system - some versions of Open IB
apparently don't need it.
This commit was SVN r7542.
searching the tree. Modified the memory callback to search the tree at each
page boundary for registrations. This is necessary as an application may
malloc memory and send out of any portion of that memory, even discontiguous
regions.
This commit was SVN r7510.
add misc asserts to check for proper reference counting.
ugly hack 1 -- use mallopt to never release memory ala sbrk - this is
commented out in mca_btl_mvapi_component_init
ugly hack 2 -- test registrations comming out of the tree via rcache_find, for
an unknown reason the tree is returning registrations where the address is not
within the base or bound of the registration. If this happens, we return
NULL.
comment out code to enable mem hooks if leave_pinned is set, note we can do
this via an mca param and will default it to leave_pinned with mem_hooks when
we iron out these issues.
I am adding a unit test for the rcache. Note that we have a unit test for the
rb tree but the compare function is significantly different than that used for
registrations. After we have tracked down the issues with rcache_rb we will
remove the above hacks.
This commit was SVN r7499.
Red Storm is complaining about invalid memory pointer (need to go back
to Linux and look at this with valgrind)
* Turn off send in place for now, so I can run the tests on RS and see if
everything else is ok
This commit was SVN r7497.
* fix dumb bug in btl_portals_get where I using the dest descriptor key instead
of the source descriptor key for the match bits, resulting in a PtlGet() with
the wrong match bits
This commit was SVN r7496.
Correct the spring of the vpid problem (similar to the one in the SM PTL).
Add one more argument to the MCA_BTL_SM_FIFO_WRITE macro who will get passed down to the
MCA_BTL_SM_SIGNAL_PEER macro to allow it to have the fifo_fd file descriptor.
This commit was SVN r7305.
a constructor, like the rest of the code base
- Convert usage in the tree to use the constructor to zero out an
instance of opal_output_stream_t
- Still need to re-enable output files
This commit was SVN r7253.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
