I have added a new MCA param (hey, you can't have too many!) called OMPI_MCA_orte_timing. If set to anything other than zero, the system will report out critical timing loops. At the moment, this includes three measurements:
1. Time spent going through the RDS->RAS->RMAPS, setting up triggers, etc. prior to calling the actual PLS launch function. This is reported out as time to setup job.
2. Time spent in MPI_Init from start of that function (well, right after opal_init) to the place where we send all of our info the registry. Reported out as time from start to exec_compound_cmd
3. Time actually spent executing the compound cmd. Reported out as time to exec_compound_cmd.
A few additional timing points will be added shortly.
These may eventually be removed or (better) setup with a conditional compile flag.
This commit was SVN r11892.
- use the OPAL functions for PATH and environment variables
- make all headers C++ friendly
- no unamed structures
- no implicit cast.
Plus a full implementation for the orte_wait functions.
This commit was SVN r11347.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
Other changes:
1. Remove the old xcpu components as they are not functional.
2. Fix a "bug" in orterun whereby we called dump_aborted_procs even when we normally terminated. There is still some kind of bug in this procedure, however, as we appear to be calling the orterun job_state_callback function every time a process terminates (instead of only once when they have all terminated). I'll continue digging into that one.
This will require an autogen/configure, I'm afraid.
This commit was SVN r11228.
Clean up the remainder of the size_t references in the runtime itself. Convert to orte_std_cntr_t wherever it makes sense (only avoid those places where the actual memory size is referenced).
Remove the obsolete oob barrier function (we actually obsoleted it a long time ago - just never bothered to clean it up).
I have done my best to go through all the components and catch everything, even if I couldn't test compile them since I wasn't on that type of system. Still, I cannot guarantee that problems won't show up when you test this on specific systems. Usually, these will just show as "warning: comparison between signed and unsigned" notes which are easily fixed (just change a size_t to orte_std_cntr_t).
In some places, people didn't use size_t, but instead used some other variant (e.g., I found several places with uint32_t). I tried to catch all of them, but...
Once we get all the instances caught and fixed, this should once and for all resolve many of the heterogeneity problems.
This commit was SVN r11204.
correctly with MPI_Comm_spawn.
The problem wiht MPI_Comm_spawn was that the 'parent' process was
rmgr.create'ing and then rmgr.launch'ing the children via the rmgr proxy
component. The HNP saw these commands and processed them normally, but
since we never went through the HNP's rmgr (urm component) spawn()
logic the triggers and key/value pairs were never created. So the
children were launched correctly, but since the HNP did not
have any triggers setup, never triggered the xcast for the
children to finish orte_init().
This fix puts the trigger and key/value pair initialization in
rmgr_urm_spawn() for the 'mpirun a.out' case, *and* in the
rmgr_base_unpack routine that deals with the creation of the
job for the child as requested by the proxy component. This
will allow the triggers to be registered for the proxy's request
which only happens during MPI_Comm_spawn*
Small change for a lot of debugging. Notice that his reverts r11037
to its previous version, and adds a newline to handle the spawn
cases.
This commit was SVN r11046.
The following SVN revision numbers were found above:
r11037 --> open-mpi/ompi@5813fb7d2a
By reverting this file (changeset from commit r10708) to its previous
version fixes the problem.
This should be moved to the v1.1 branch where it is also broken.
This commit was SVN r11037.
The following SVN revision numbers were found above:
r10708 --> open-mpi/ompi@febc143d8c
Update the help text to report errors when not following that rule.
Also updated the RMAPS help text to reflect the reorganization of some of the round-robin code into the base.
The new functionality has been tested under Mac OS-X and on Odin using an MPI program. Both byslot and bynode mapping have been checked and verified. Operational support for other systems needs to be verified - I respectfully request people's help in doing so.
This commit was SVN r10708.
This commit will apply cleanly to the v1.1 branch, and should
be moved over once I get someone to verify it.
The problem is outlined in the bug. The fix was to move the
setting of the app context index (idx) before we put it in the
GPR so that it is propogated to the gpr.
The reason this hasn't bitten us before is because we init
app->idx to 0, which is true most of the time. Except that is
when MPI_Comm_spawn_multiple in which we put in more than
one app context, thus care about correct indexing.
This was causing down the line memory corruption by overrunning
the mapping array. This commit also puts in a check to make
sure that we error out if we ever try to do that again.
This commit was SVN r10380.
1. Changed the RMGR and PLS APIs to add "signal_job" and "signal_proc" entry points. Only the "signal_job" entries are implemented - none of the components have implementations for "signal_proc" at this time. Thus, you can signal all of the procs in a job, but cannot currently signal only one specific proc.
2. Implemented those new API functions in all components except xgrid (Brian will do so very soon). Only the rsh/ssh and fork modules have been tested, however, and only under OS-X.
3. Added signal traps and callback functions for SIGUSR1/2 to orterun/mpirun that catch those signals and call the appropriate commands to propagate them out to all processes in the job.
4. Added a new test directory under the orte branch to (eventually) hold unit and system level tests for just the run-time. Since our test branch of the repository is under restricted access, people working on the RTE were continually developing their own system-level tests - thus making it hard to help diagnose problems. I have moved the more commonly-used functions here, and added one specifically for testing the SIGUSR1/2 functionality.
I will be contacting people directly to seek help with testing the changes on more environments. Other than compile issues, you should see absolutely no change in behavior on any of your systems - this additional functionality is transparent to anyone who does not issue a SIGUSR1/2 to mpirun.
Ralph
This commit was SVN r10258.
exit out, rather than trying to have the pls exit. Since singletons
weren't started with a pls, there's no way the pls is going to be
able to kill the process. So just exit and save the error message.
This commit was SVN r9859.
* Add a platform spec for using the portals reference implementation's
RTE instead of our own to make local testing easier.
* Add a cnos rmgr component so that 1) we don't have to build nearly
as many components (no need for ras,rds,pls,etc.) and 2) calls
to MPI_ABORT() won't print error messages about not being able to
contact the daemon. Still need to fill in some of the terminate
stuff with calls from cnos, but will come in time.
* Make gpr_null use the base code for creating value and keyval
structures so that we don't segfault in ompi_mpi_init().
This commit was SVN r9510.
for the type to be packed / unpacked when dealing with sized types (like
size_t) so that the dss_unpack code to deal with types of different sizes is
activated. Necessary for proper 32/64 interoperability.
This commit was SVN r9475.
argv[0] and the cwd on the target node (i.e., the node where the
executable will be running in all systems except BProc, where the
searches are run on the node where orterun is invoked).
- fork pls now does cwd and argv[0] search in orted
- bproc pls does cwd and argv[0] search in orterun
- cwd behavior slightly different:
- if user specifies a -wdir to orterun, we chdir() to there; if we
can't for some reason, abort
- if user does not specify a -wdir, try to chdir() to the dir where
orterun was invoked. If we can't for some reason (e.g., it
doesn't exist on the target node), then try to chdir($HOME). If
we can't do that, then just live with whatever default directory
we were put in.
This commit was SVN r9068.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
* turns out (duh!) that there was a reason that the <projectdir>dir
variable was set in the AM conditional. If not, stupid directories
are created and not needed... duh.
This commit was SVN r8205.
component/base Makefile.am files, reducing the time configure spends
stamping out Makefiles at the end
* Install base_impl.h file when devel-headers are being installed
This commit was SVN r8200.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
command:
svn merge -r 7567:7663 https://svn.open-mpi.org/svn/ompi/tmp/jjhursey-rmaps .
(where "." is a trunk checkout)
The logs from this branch are much more descriptive than I will put
here (including a *really* long description from last night). Here's
the short version:
- fixed some broken implementations in ras and rmaps
- "orterun --host ..." now works and has clearly defined semantics
(this was the impetus for the branch and all these fixes -- LANL had
a requirement for --host to work for 1.0)
- there is still a little bit of cleanup left to do post-1.0 (we got
correct functionality for 1.0 -- we did not fix bad implementations
that still "work")
- rds/hostfile and ras/hostfile handshaking
- singleton node segment assignments in stage1
- remove the default hostfile (no need for it anymore with the
localhost ras component)
- clean up pls components to avoid duplicate ras mapping queries
- [possible] -bynode/-byslot being specific to a single app context
This commit was SVN r7664.
will fire some subscriptions that will eventually result in invoking
terminate_job (i.e., terminate anything that may have been
successfully started by launch).
This commit was SVN r7622.
