#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
udapl/openib/vapi/gm mpools a deprecated. rdma mpool has parameter that allows
to limit its size mpool_rdma_rcache_size_limit (default is 0 - unlimited).
This commit was SVN r12878.
I've introduced a race condition - seeing occasional LOCAL_LENGTH errors on the receive side. I think I'm mixing up eager/max somehow - will look at it more on monday.
This commit was SVN r10690.
1. ompi/mca/btl/udapl/btl_udapl_proc.c should be including
btl_udapl_endpoint.h for mca_btl_udapl_proc_insert function.
2. btl_udapl_endpoint.c it looks like you are using
&endpoint->endpoint_lock when you should use &ep->endpoint_lock in a
OPAL_THREAD_LOCK call.
3. btl_udapl_frag.h has a couple opal_list_item_t's that should be
ompi_free_list_item_t in the _FRAG_ALLOC_{EAGER,MAX} macros.
This commit was SVN r10442.
- Added some basic flow control to limit number of posted sends.
- Merged endpoint send/recv lock into single endpoint lock.
- Set the LMR triplet length in the send path, not at allocation time.
This has to be done because upper layers might send less than the
amount allocated.
- Alter the tie-breaker if statement protecting the second call
to dat_ep_connect(). The logic was reversed compared to the tie-
breaker for the first dat_ep_connect(), making it possible for
3 or more processes to form a deadlock loop.
- Some asserts were added for debugging purposes.. leaving them
in place for now.
This commit was SVN r10317.
Trying to remember what I did here.. eager/max messages should work now, no RDMA yet. A number of other fixes and cleanups.
I do know of two problems:
Bad stuff happens when flooded with send frags too quickly - the BTL doesn't handle flow control.
Certain IBM tests turn up a length assertion in the datatype engine - needs more investigation.
This commit was SVN r10070.
- Grab the mpool_registration in _frag_common_constructor()
- Save the LMR context in the segment key
- No need for cookie variables - can just cast the frag
- No need to memcpy() data when recv'ing
- Add an LMR triplet to the fragment structure and initialize it
in btl_udapl_alloc().
- Whitespace/typo fixes, remove some opal_output() calls
Looks like I can use triplets describing sub-regions of registered LMR's. So I
do this - prior to this patch I was sending the entire free list memory over,
which isn't correct :)
Back to an earlier problem - when sending address information right after
connection establishment, the receiving end receives a DTO completion event and
appears to have good data. But the sending end never receives a DTO completion
event indicating the send completed, and never completes the client side of the
connection.
This commit was SVN r9386.
In short, I'm very close to having connection establishment and eager send/recv working.
Part of the connection process involves sending address information from the
client to server. For some reason, I am never receiving an event indicating
completetion of the send on the client side. Otherwise, connection
establishment is working and eager send/recv should be trivial from here.
Some more detailed changes:
- Send partially implemented, just handles starting up new connections.
- Several support functions implemented for establishing connection. Client
side code went in btl_udapl_endpoint.c, server side in btl_udapl_component.c
- Frags list and send/recv locks added to the endpoint structure.
- BTL sets up a public service point, which listens for new connections.
Steps over ports that are already bound, iterating through a range of ports.
- Remove any traces of recv frags, don't think I need them after all.
- Pieces of component_progress() implemented for connection establishment.
- Frags have two new types for connection establishment - CONN_SEND and
CONN_RECV.
- Many other minor cleanups not affecting functionality
This commit was SVN r9345.
- Start filling in the progress function, focusing on connection establishment.
- Initialize udapl mpool and free lists
- Create/destroy a protection zone with each IA
- Misc organization as I learn how things work
This commit was SVN r8969.
- Remove printing of CFLAGS in configure.m4
- Set MCA_BTL_FLAGS_SEND flag
- Improved error handling during module initialization
- Extract the address of each interface with dat_ia_query
- Start playing around with fragment stuff - probably wrong
- Misc code cleanup (removal of GM-specific code)
This commit was SVN r8801.
- Copied the template BTL and renamed everything
- Compiles and shows up correctly in ompi_info, not tested past that
- Should be ignored for everyone but me
This commit was SVN r8544.
