- fix the Fortran layer to use new macros to convert Fortran-to-C status
- change the C internals to pull out old OMPI_SET_STATUS* macros
Also, change name of "status" argument in topo_test_f.c to "topo_type".
This commit was SVN r27403.
* Add OMPI_COMMON_VERBS_FLAGS_NOT_RC, which looks for a device that
does ''not'' support RC
* Add ompi_common_verbs_find_max_inline(), and remove that code from
the openib BTL component
This commit was SVN r27393.
ompi/mca/sbgp/basesmsocket
orte/mca/rmaps/lama
Remove stale configure.params files from the sbgp framework as the OMPI build system no longer looks at those files.
This commit was SVN r27377.
1. Multiple aggregator with non-contiguous datatype,
2. Memory corruption bugs.
Cleaned version, with proper initialization and memory management.
This commit was SVN r27370.
* Moved "check basics" sanity check from openib BTL to common/verbs
(which also allows us to have openib ''not'' include
<infiniband/driver.h>, which is a Very Good Thing)
* Add new ompi_common_verbs_qp_test() function, which tests to see
whether a device supports RC and/or UD QPs. The openib BTL now
uses this function to ensure that the device supports RC QPs.
* Rename ompi_common_verbs_find_ibv_ports() to be
ompi_common_verbs_find_ports() -- the "ibv" was redundant.
* Re-work ompi_common_verbs_find_ports() to use
ompi_common_verbs_qp_test() instead of testing for RC/UD QPs itself
* Add bunches of opal_output_verbose() to the find_ports() routine
(to help diagnosing connectivity problems -- imaging running with
--mca btl_base_verbose 10; you'll see all the find_ports() test
results)
* Make ompi_common_verbs_qp_test() warn if devices/ports are supplied
in the if_include/if_exclude strings that do not exists (quite
similar to what the openib BTL does today).
* Add ompi_common_verbs_mca_register() function, which registers
common verbs MCA params. It will also register MCA param synonyms
for thse MCA params to upper-level components (e.g.,
btl_<upper-level-component>_<the-mca-param>).
* common_verbs_warn_nonexistent_if: warn if
if_include/if_exclude-specified devices or ports do not exist.
This commit was SVN r27332.
- otfaux:
- fixed build error on Solaris and NetBSD (removed -lm from library dependencies)
Changes to VT:
- vtunify:
- disable OpenMP parallelization if PGI compiler version < 9 is used (threadprivate not supported)
This commit was SVN r27316.
* Minor man page tweaks
* Use existing ompi_mpi_thread_requested global
This commit was SVN r27308.
The following Trac tickets were found above:
Ticket 3309 --> https://svn.open-mpi.org/trac/ompi/ticket/3309
We ran into a case where the OMPI SVN trunk grew a new acceptable MCA
parameter value, but this new value was not accepted on the v1.6
branch (hwloc_base_mem_bind_failure_action -- on the trunk it accepts
the value "silent", but on the older v1.6 branch, it doesn't). If you
set "hwloc_base_mem_bind_failure_action=silent" in the default MCA
params file and then accidentally ran with the v1.6 branch, every OMPI
executable (including ompi_info) just failed because hwloc_base_open()
would say "hey, 'silent' is not a valid value for
hwloc_base_mem_bind_failure_action!". Kaboom.
The only problem is that it didn't give you any indication of where
this value was being set. Quite maddening, from a user perspective.
So we changed the ompi_info handles this case. If any framework open
function return OMPI_ERR_BAD_PARAM (either because its base MCA params
got a bad value or because one of its component register/open
functions return OMPI_ERR_BAD_PARAM), ompi_info will stop, print out
a warning that it received and error, and then dump out the parameters
that it has received so far in the framework that had a problem.
At a minimum, this will show the user the MCA param that had an error
(it's usually the last one), and ''where it was set from'' (so that
they can go fix it).
We updated ompi_info to check for O???_ERR_BAD_PARAM from each from
the framework opens. Also updated the doxygen docs in mca.h for this
O???_BAD_PARAM behavior. And we noticed that mca.h had MCA_SUCCESS
and MCA_ERR_??? codes. Why? I think we used them in exactly one
place in the code base (mca_base_components_open.c). So we deleted
those and just used the normal OPAL_* codes instead.
While we were doing this, we also cleaned up a little memory
management during ompi_info/orte-info/opal-info finalization.
Valgrind still reports a truckload of memory still in use at ompi_info
termination, but they mostly look to be components not freeing
memory/resources properly (and outside the scope of this fix).
This commit was SVN r27306.
The following Trac tickets were found above:
Ticket 3275 --> https://svn.open-mpi.org/trac/ompi/ticket/3275
- configure: do not build OpenMP support if CFLAGS contains a compiler flag for disabling handling OpenMP directives (e.g. -fno-openmp, -nomp, -hnoomp)
Fixes trac:3117
This commit was SVN r27282.
The following Trac tickets were found above:
Ticket 3117 --> https://svn.open-mpi.org/trac/ompi/ticket/3117
- general:
- incremented version number ro 1.11.3openmpi
- otfaux:
- fixed build error when using the Oracle compiler on Solaris. (removed usage of too recent rint() function)
Fixes trac:3257
This commit was SVN r27279.
The following Trac tickets were found above:
Ticket 3257 --> https://svn.open-mpi.org/trac/ompi/ticket/3257
patch that helped them test (r27184). Thanks Abosoft!
This commit was SVN r27277.
The following SVN revision numbers were found above:
r27184 --> open-mpi/ompi@a951a5ee99
ompi_comm_split(), and the entire set of periods from the old
communicator have already been copied to the new communicator. But up
here in mca_topo_base_cart_sub(), we need to subset the periods that
are actually stored on the new communicator according to remain_dims
(just like we did for the set of dimensions).
This commit renames a few variables to be a little less misleading,
and then adds a loop to copy over the periods information. I could
have added this into the first loop (that subset-copies the
dimensions), but this code is already confusing enough and this is not
a performance-critical section: so I made it a new loop.
Note that all the topo code will be revamped a bit when the new
MPI-2.2 topo stuff (currently off in a mercurial branch) finally makes
it back to the SVN trunk. But that new stuff will only get to v1.7 --
this commit will need to be CMR'ed to v1.6.x.
cmr:v1.7
cmr:v1.6.2
This commit was SVN r27248.
The following Trac tickets were found above:
Ticket 3294 --> https://svn.open-mpi.org/trac/ompi/ticket/3294
some new common OpenFabrics functionality to ompi/mca/common/verbs.
Also move everything that was in ompi/mca/common/ofautils under
ompi/mca/common/verbs.
* Move ofautils -> verbs
* Add new functionality in ompi/mca/common/verbs (see doxygen
* comments in ompi/mca/common/verbs/common_verbs.h for details):
* ompi_common_verbs_find_ibv_ports()
* ompi_common_verbs_port_bw()
* ompi_common_verbs_mtu()
* '''If you're writing verbs-based code, you should be using this
common functionality'''
* Adapt openib BTL to use some trivial common functionality in
common/verbs
* Don't use "#ifdef OMPI_HAVE_RDMAOE",use
"#if defined(HAVE_IBV_LINK_LAYER_ETHERNET)"
* Update the following to include/link against common/verbs
* bcol/iboffload
* sbgp/ibnet
* btl/openib
This commit was SVN r27212.
Absoft has determined exactly what the problem is (private members in
derived data typed when compiled with -g), but does not yet have a
timeline for fixing it.
Add a temporary override for Absoft until they are able to fix their
compiler. This switch will at least allow us to MTT test the rest of
the mpi_f08 functionality with Absoft.
This commit was SVN r27184.
The following Trac tickets were found above:
Ticket 3248 --> https://svn.open-mpi.org/trac/ompi/ticket/3248
