1
1
Граф коммитов

44 Коммитов

Автор SHA1 Сообщение Дата
Josh Hursey
e12ca48cd9 A number of C/R enhancements per RFC below:
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php

Documentation:
  http://osl.iu.edu/research/ft/

Major Changes: 
-------------- 
 * Added C/R-enabled Debugging support. 
   Enabled with the --enable-crdebug flag. See the following website for more information: 
   http://osl.iu.edu/research/ft/crdebug/ 
 * Added Stable Storage (SStore) framework for checkpoint storage 
   * 'central' component does a direct to central storage save 
   * 'stage' component stages checkpoints to central storage while the application continues execution. 
     * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) 
     * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) 
 * Added Compression (compress) framework to support 
 * Add two new ErrMgr recovery policies 
   * {{{crmig}}} C/R Process Migration 
   * {{{autor}}} C/R Automatic Recovery 
 * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component 
 * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) 
   * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) 
   * {{{OMPI_CR_Restart}}} 
   * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) 
   * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) 
   * {{{OMPI_CR_Quiesce_start}}} 
   * {{{OMPI_CR_Quiesce_checkpoint}}} 
   * {{{OMPI_CR_Quiesce_end}}} 
   * {{{OMPI_CR_self_register_checkpoint_callback}}} 
   * {{{OMPI_CR_self_register_restart_callback}}} 
   * {{{OMPI_CR_self_register_continue_callback}}} 
 * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. 
 * Add a progress meter to: 
   * FileM rsh (filem_rsh_process_meter) 
   * SnapC full (snapc_full_progress_meter) 
   * SStore stage (sstore_stage_progress_meter) 
 * Added 2 new command line options to ompi-restart 
   * --showme : Display the full command line that would have been exec'ed. 
   * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) 
 * Deprecated some MCA params: 
   * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir 
   * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir 
   * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared 
   * snapc_base_store_in_place deprecated, replaced with different components of SStore 
   * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref 
   * snapc_base_establish_global_snapshot_dir deprecated, never well supported 
   * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem 

Minor Changes: 
-------------- 
 * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. 
 * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components 
 * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. 
 * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} 
 * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. 
 * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. 
 * Cleanup the CRS framework and components to work with the SStore framework. 
 * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). 
 * Add 'quiesce' hook to CRCP for a future enhancement. 
 * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. 
 * Add optional application level INC callbacks (registered through the CR MPI Ext interface). 
 * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. 
 * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. 
 * {{{opal-restart}}} also support local decompression before restarting 
 * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata 
 * {{{orte-restart}}} now uses the SStore framework to work with the metadata 
 * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. 
 * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. 
 * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. 
 * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. 
 * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. 
 * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. 
 * Improve the checks for 'already checkpointing' error path. 
 * A a recovery output timer, to show how long it takes to restart a job 
 * Do a better job of cleaning up the old session directory on restart. 
 * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) 
 * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. 

This commit was SVN r23587.

The following Trac tickets were found above:
  Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
  Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
  Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
  Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
  Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
  Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
  Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
Abhishek Kulkarni
afbe3e99c6 * Wrap all the direct error-code checks of the form (OMPI_ERR_* == ret) with
(OMPI_ERR_* = OPAL_SOS_GET_ERR_CODE(ret)), since the return value could be a
 SOS-encoded error. The OPAL_SOS_GET_ERR_CODE() takes in a SOS error and returns
 back the native error code.

* Since OPAL_SUCCESS is preserved by SOS, also change all calls of the form
  (OPAL_ERROR == ret) to (OPAL_SUCCESS != ret). We thus avoid having to
  decode 'ret' to get the native error code.

This commit was SVN r23162.
2010-05-17 23:08:56 +00:00
Josh Hursey
b749ecbab8 This commit fixes trac:2190.
Originally the patch was to improve the error message, but when digging into the code I found a subtle bug. If the daemon does not tell the HNP what CRS component it used, then the HNP tries to figure it out from the metadata (this is an uncommon case). The path the HNP used was not complete, so it was unable to find the metadata information. This patch fixes this by adding the 'snapshot_reference' to the 'snapshot_location' which completes the path for this search.

cmr:v1.4 (needs a custom patch)

cmr:v1.5

This commit was SVN r22479.

The following Trac tickets were found above:
  Ticket 2190 --> https://svn.open-mpi.org/trac/ompi/ticket/2190
2010-01-25 20:28:38 +00:00
Josh Hursey
5406fdfb80 Add support for sending SIGSTOP the MPI job after the checkpoint is taken (uses a BLCR feature for the option).
This commit looks larger than it really is since it includes a fair amount of code cleanup.

The SIGSTOP/SIGCONT+checkpointing work uses some of the functionality in r20391. Basic use case below (note that the checkpoint generated is useable as usual if the stopped application is terminated).
{{{
shell 1) mpirun -np 2 -am ft-enable-cr my-app
... running ...

shell 2) ompi-checkpoint --stop -v MPIRUN_PID
[localhost:001300] [  0.00 /   0.20]                 Requested - ...
[localhost:001300] [  0.00 /   0.20]                   Pending - ...
[localhost:001300] [  0.01 /   0.21]                   Running - ...
[localhost:001300] [  1.01 /   1.22]                   Stopped - ompi_global_snapshot_1234.ckpt
Snapshot Ref.: 0 ompi_global_snapshot_1234.ckpt

shell 2) killall -CONT mpirun

... Application Continues execution in shell 1 ...
}}}

Other items in this commit are mostly cleanup that has been sitting off-trunk for too long:
 * Add a new {{{opal_crs_base_ckpt_options_t}}} type that encapsulates the various options that could be passed to the CRS. Currently only TERM and STOP, but this makes adding others ''much'' easier.
 * Eliminate ORTE_SNAPC_CKPT_STATE_PENDING_TERM, since it served a redundant purpose with the new options type.
 * Lay some basic ground work for some future features.

This commit was SVN r21995.

The following SVN revision numbers were found above:
  r20391 --> open-mpi/ompi@0704b98668
2009-09-22 18:26:12 +00:00
George Bosilca
3e971e61f3 The system headers are supposed to be protected by #ifdef and not by #if.
This commit was SVN r21700.
2009-07-16 18:27:33 +00:00
Josh Hursey
91c4869cdc Use {{{ORTE_*_VERSION}}} instead of {{{OMPI_*_VERSION}}} in orte
This commit was SVN r21558.
2009-06-29 12:53:23 +00:00
Shiqing Fan
9f624cd9a2 A small fix, the right one to use in orte.
This commit was SVN r21213.
2009-05-12 09:53:34 +00:00
Josh Hursey
d920a302f3 Some more C/R related commits that have been sitting off-trunk for a while.
* Pass the sequence number of the checkpoint along with reference from the global to the local coordinator.
 * 'orte-restart --apponly' now just generates the app context file, and does not run with it. This provides the user the ability to edit the file before launching. 
 * Add a OPAL_CRS_NONE state
 * Split the INC into three distinct parts.
 * Implement a restart mechanism for the 'none' component. If given a context it simply execvp()'s it.

This commit was SVN r21195.
2009-05-08 20:51:13 +00:00
Josh Hursey
5d0607395d A couple of C/R related commits that have been sitting off-trunk for a while.
* Add 'orte-checkpoint -l' option that lists all checkpoints currently available on the system.
 * Add 'orte-restart -i' which prints information regarding the checkpoint targeted for restart.
 * Add ability to extract the timing metadata.
 * Fix show_help() in the orte-checkpoint and orte-restart tools. They should be using the opal versions instead of the orte versions (otherwise nothing is printed).

This commit was SVN r21194.
2009-05-08 19:41:11 +00:00
Josh Hursey
0deb009225 A bunch of improvements focused on Snapshot Coordination (SnapC) and File Management (FileM).
* Improved timing in SnapC Full Global Coordinator
 * Improved scalability of the SnapC Full protocol
 * Minor improvements to the error reporting mechanisms in SnapC and FileM
 * Improved the memory usage of the metadata routines - now the owner of the data is more explicit.
 * Added a FileM hint to indicate when files stored locally can be moved to/from a globally mounted file system using just the 'cp' command instead of the 'rcp/scp' command. Slightly improves performance, but not too drastically. Can be set using the following SnapC MCA parameter: {{{snapc_base_global_shared=1}}}
 * Implement the ability to throttle the number of outgoing connections in FileM. At larger scales this type of explicit throttling helps prevent overwhelming the HNP machine. Default: 10, set via MCA parameter: {{{filem_rsh_max_outgoing}}}
 * Add a few diagnostic/debugging features to SnapC and FileM.

This commit was SVN r21131.
2009-04-30 16:55:39 +00:00
Rainer Keller
221fb9dbca ... Delayed due to notifier commits earlier this day ...
- Delete unnecessary header files using
   contrib/check_unnecessary_headers.sh after applying
   patches, that include headers, being "lost" due to
   inclusion in one of the now deleted headers...

   In total 817 files are touched.
   In ompi/mpi/c/ header files are moved up into the actual c-file,
   where necessary (these are the only additional #include),
   otherwise it is only deletions of #include (apart from the above
   additions required due to notifier...)

 - To get different MCAs (OpenIB, TM, ALPS), an earlier version was
   successfully compiled (yesterday) on:
   Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
   Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
   Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled

This commit was SVN r21096.
2009-04-29 01:32:14 +00:00
Rainer Keller
d8cf4c0fec - Get pgcc on XT to complain less:
In case we use memcmp, strlen, strup and friends include <string.h>
   Also several constants.h are not included directly
 - Let's have mca_topo_base_cart_create  return ompi-errors in
   ompi/mca/topo/base/topo_base_cart_create.c

This commit was SVN r20773.
2009-03-13 02:10:32 +00:00
Rainer Keller
a94438343b - Revert r20740
This commit was SVN r20741.

The following SVN revision numbers were found above:
  r20740 --> open-mpi/ompi@2a70618a77
2009-03-05 21:50:47 +00:00
Rainer Keller
2a70618a77 - Second patch, as discussed in Louisville.
Replace short macros in orte/util/name_fns.h
   to the actual fct. call.

 - Compiles on linux/x86-64

This commit was SVN r20740.
2009-03-05 21:14:18 +00:00
Rainer Keller
d81443cc5a - On the way to get the BTLs split out and lessen dependency on orte:
Often, orte/util/show_help.h is included, although no functionality
   is required -- instead, most often opal_output.h, or               
   orte/mca/rml/rml_types.h                                           
   Please see orte_show_help_replacement.sh commited next.            

 - Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
   actually showed two *missing* #include "orte/util/show_help.h"     
   in orte/mca/odls/base/odls_base_default_fns.c and                  
   in orte/tools/orte-top/orte-top.c                                  
   Manually added these.                                              

   Let's have MTT the last word.

This commit was SVN r20557.
2009-02-14 02:26:12 +00:00
Jeff Squyres
0af7ac53f2 Fixes trac:1392, #1400
* add "register" function to mca_base_component_t
   * converted coll:basic and paffinity:linux and paffinity:solaris to
     use this function
   * we'll convert the rest over time (I'll file a ticket once all
     this is committed)
 * add 32 bytes of "reserved" space to the end of mca_base_component_t
   and mca_base_component_data_2_0_0_t to make future upgrades
   [slightly] easier
   * new mca_base_component_t size: 196 bytes
   * new mca_base_component_data_2_0_0_t size: 36 bytes
 * MCA base version bumped to v2.0
   * '''We now refuse to load components that are not MCA v2.0.x'''
 * all MCA frameworks versions bumped to v2.0
 * be a little more explicit about version numbers in the MCA base
   * add big comment in mca.h about versioning philosophy

This commit was SVN r19073.

The following Trac tickets were found above:
  Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
2008-07-28 22:40:57 +00:00
Ralph Castain
0532d799d6 Complete implementation of the --without-rte-support configure option. Working with Brian, this has been tested on RedStorm.
Some minor changes to help facilitate debugger support so that both mpirun and yod can operate with it. Still to be completed.

This commit was SVN r18664.
2008-06-18 03:15:56 +00:00
Ralph Castain
9613b3176c Effectively revert the orte_output system and return to direct use of opal_output at all levels. Retain the orte_show_help subsystem to allow aggregation of show_help messages at the HNP.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.

I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.

This commit was SVN r18619.
2008-06-09 14:53:58 +00:00
Josh Hursey
1de50b523c Fix some Coverity 'Event set_but_not_used' highlights.
Thanks to Jeff for bringing them to my attention.

This commit was SVN r18606.
2008-06-06 14:38:41 +00:00
Ralph Castain
c992e99035 Remove the tags from orte_output_open and the filtering operation from orte_output - this will be handled differently to improve the XML output interface
This commit was SVN r18557.
2008-06-03 14:24:01 +00:00
Jeff Squyres
e7ecd56bd2 This commit represents a bunch of work on a Mercurial side branch. As
such, the commit message back to the master SVN repository is fairly
long.

= ORTE Job-Level Output Messages =

Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):

 * orte_output(): (and corresponding friends ORTE_OUTPUT,
   orte_output_verbose, etc.)  This function sends the output directly
   to the HNP for processing as part of a job-specific output
   channel.  It supports all the same outputs as opal_output()
   (syslog, file, stdout, stderr), but for stdout/stderr, the output
   is sent to the HNP for processing and output.  More on this below.
 * orte_show_help(): This function is a drop-in-replacement for
   opal_show_help(), with two differences in functionality:
   1. the rendered text help message output is sent to the HNP for
      display (rather than outputting directly into the process' stderr
      stream)
   1. the HNP detects duplicate help messages and does not display them
      (so that you don't see the same error message N times, once from
      each of your N MPI processes); instead, it counts "new" instances
      of the help message and displays a message every ~5 seconds when
      there are new ones ("I got X new copies of the help message...")

opal_show_help and opal_output still exist, but they only output in
the current process.  The intent for the new orte_* functions is that
they can apply job-level intelligence to the output.  As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.

=== New code ===

For ORTE and OMPI programmers, here's what you need to do differently
in new code:

 * Do not include opal/util/show_help.h or opal/util/output.h.
   Instead, include orte/util/output.h (this one header file has
   declarations for both the orte_output() series of functions and
   orte_show_help()).
 * Effectively s/opal_output/orte_output/gi throughout your code.
   Note that orte_output_open() takes a slightly different argument
   list (as a way to pass data to the filtering stream -- see below),
   so you if explicitly call opal_output_open(), you'll need to
   slightly adapt to the new signature of orte_output_open().
 * Literally s/opal_show_help/orte_show_help/.  The function signature
   is identical.

=== Notes ===

 * orte_output'ing to stream 0 will do similar to what
   opal_output'ing did, so leaving a hard-coded "0" as the first
   argument is safe.
 * For systems that do not use ORTE's RML or the HNP, the effect of
   orte_output_* and orte_show_help will be identical to their opal
   counterparts (the additional information passed to
   orte_output_open() will be lost!).  Indeed, the orte_* functions
   simply become trivial wrappers to their opal_* counterparts.  Note
   that we have not tested this; the code is simple but it is quite
   possible that we mucked something up.

= Filter Framework =

Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr.  The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations.  The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc.  This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).

Filtering is not active by default.  Filter components must be
specifically requested, such as:

{{{
$ mpirun --mca filter xml ...
}}}

There can only be one filter component active.

= New MCA Parameters =

The new functionality described above introduces two new MCA
parameters:

 * '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
   help messages will be aggregated, as described above.  If set to 0,
   all help messages will be displayed, even if they are duplicates
   (i.e., the original behavior).
 * '''orte_base_show_output_recursions''': An MCA parameter to help
   debug one of the known issues, described below.  It is likely that
   this MCA parameter will disappear before v1.3 final.

= Known Issues =

 * The XML filter component is not complete.  The current output from
   this component is preliminary and not real XML.  A bit more work
   needs to be done to configure.m4 search for an appropriate XML
   library/link it in/use it at run time.
 * There are possible recursion loops in the orte_output() and
   orte_show_help() functions -- e.g., if RML send calls orte_output()
   or orte_show_help().  We have some ideas how to fix these, but
   figured that it was ok to commit before feature freeze with known
   issues.  The code currently contains sub-optimal workarounds so
   that this will not be a problem, but it would be good to actually
   solve the problem rather than have hackish workarounds before v1.3 final.

This commit was SVN r18434.
2008-05-13 20:00:55 +00:00
Josh Hursey
da2f1c58e2 Some checkpoint/restart cleanup.
* Remove the opal_only option. This was suffering from bit rot, and no one uses it. It can be added back fairly easily if wanted.
 * Cleanup metadata interactions at the local level.
 * Touch up some of the INC funcitonality (fix typos and a minor ordering issue)

This commit was SVN r18416.
2008-05-08 18:47:47 +00:00
Josh Hursey
9971bc9d95 Merge in the mca_base_select changes per RFC:
http://www.open-mpi.org/community/lists/devel/2008/04/3779.php

{{{
svn merge -r 18276:18380 https://svn.open-mpi.org/svn/ompi/tmp-public/jjh-mca-play .
}}}

Any components not in the trunk, but in one of the effected frameworks *must* be
updated. Contact the list, look at the RFC, or look at the diff for how to do this.

Sorry for the early commit of this, but I wanted to get it in today (per RFC) and
didn't know if I would have a chance later today.

This commit was SVN r18381.
2008-05-06 18:08:45 +00:00
Josh Hursey
cc83d41ad9 Merge in tmp/jjh-scratch
{{{
 svn merge -r 18218:18240 https://svn.open-mpi.org/svn/ompi/tmp/jjh-scratch .
}}}

Contains:
 * Primarily a fix for a user reported problem where a cached file descriptor is causing a SIGPIPE on restart.
 * Cleanup some small memory leaks from using mca_base_param_env_var() - Thanks Jeff
 * Cleanup ORTE FT tool compilation in non-FT builds - Thanks Tim P.
 * Cleanup mpi interface with missplaced {{{OPAL_CR_ENTER_LIBRARY}}} - Thanks Terry
 * Some other sundry cleanup items all dealing with C/R functionality in the trunk.

This commit was SVN r18241.
2008-04-23 00:17:12 +00:00
George Bosilca
ee784b601e For consistency reasons always use opal_home_directory and
opal_tmp_directory.

This commit was SVN r18043.
2008-03-31 18:13:41 +00:00
George Bosilca
493677426d Use the OPAL function to retrieve the HOME and TMP environment values.
This commit was SVN r18037.
2008-03-31 17:10:08 +00:00
Josh Hursey
3b4073e32c This commit fixes the checkpoint/restart functionality on the trunk. Included in this commit are:
* Extension to the ESS framework to support C/R
 * Fixed support for {{{snapc_base_establish_global_snapshot_dir}}}
 * Fixed FileM support
 * Misc. minor code modifications

There are some outstanding visability issues that I want to fix next.

This commit was SVN r17725.
2008-03-05 04:57:23 +00:00
Ralph Castain
d70e2e8c2b Merge the ORTE devel branch into the main trunk. Details of what this means will be circulated separately.
Remains to be tested to ensure everything came over cleanly, so please continue to withhold commits a little longer

This commit was SVN r17632.
2008-02-28 01:57:57 +00:00
Josh Hursey
a287c9cb65 This commit distinguishes the file transfer stage from the finish stage.
This commit also cleans up the checkpoint and terminate case making it more
precise than before. Previously the application could make a small amount of
progress between checkpoint completion and application termination. Now the
application will make no progress at all in this time span.

Additional minor change:
 - Start using OPAL_INT_TO_BOOL instead of if/else logic

This commit was SVN r16952.
2007-12-13 14:37:17 +00:00
Josh Hursey
0bf61a1b84 Move in some accumulated small features and minor bug fixes for C/R support.
{{{
svn merge -r 16447:16475 https://svn.open-mpi.org/svn/ompi/tmp/jjh-fgs .
}}}

This commit was SVN r16478.
2007-10-17 13:47:36 +00:00
Josh Hursey
f16a42947a Change some default MCA parameters:
- Global snapshot directory = $HOME
 - FileM 'rsh' = 'ssh'
 - FileM 'rcp' = 'scp'

This commit was SVN r16444.
2007-10-15 15:21:17 +00:00
Josh Hursey
729c63cf9d Fix invalid MCA 'base' names so they appear in ompi_info.
A subset of this patch needs to be applied to v1.2

Refs trac:928

This commit was SVN r15918.

The following Trac tickets were found above:
  Ticket 928 --> https://svn.open-mpi.org/trac/ompi/ticket/928
2007-08-18 03:05:45 +00:00
Josh Hursey
a24e530f8e Some C/R fixes (more to come)
r15390 - Changed the paradigm in which the runtime worked by enabling the mpirun
process to become an orted and spawn processes. This broke the C/R for this 
special case as it required that the orted start the process, and that 
the hierarchy remains.
The fix was to allow the global coordinator to be a local coordinator as well
for this case.

r15528 - Changed the selection logic for the RML. This caused the application to
segv if the 'ftrm' wrapper component was selected as it tried to modify a NULL
pointer.
The fix was to move the 'module swap' code into the init() function, and swap
when passed a NULL pointer. It sounds bad, but actually cleans up the code a bit
more.

Still have to fix the 'routed' framework.

This commit was SVN r15566.

The following SVN revision numbers were found above:
  r15390 --> open-mpi/ompi@bd65f8ba88
  r15528 --> open-mpi/ompi@39a6057fc6
2007-07-23 20:13:37 +00:00
Brian Barrett
5b9fa7e998 reapply r15517 and r15520, which were removed in r15527 so that I could get
the RML/OOB merge in slightly easier

This commit was SVN r15530.

The following SVN revision numbers were found above:
  r15517 --> open-mpi/ompi@41977fcc95
  r15520 --> open-mpi/ompi@9cbc9df1b8
  r15527 --> open-mpi/ompi@2d17dd9516
2007-07-20 02:34:29 +00:00
Brian Barrett
39a6057fc6 A number of improvements / changes to the RML/OOB layers:
* General TCP cleanup for OPAL / ORTE
  * Simplifying the OOB by moving much of the logic into the RML
  * Allowing the OOB RML component to do routing of messages
  * Adding a component framework for handling routing tables
  * Moving the xcast functionality from the OOB base to its own framework

Includes merge from tmp/bwb-oob-rml-merge revisions:

    r15506, r15507, r15508, r15510, r15511, r15512, r15513

This commit was SVN r15528.

The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
  r15506
  r15507
  r15508
  r15510
  r15511
  r15512
  r15513
2007-07-20 01:34:02 +00:00
Brian Barrett
2d17dd9516 temporarily back our r15517 and 15520 so that I can get the RML / OOB changes
to cleanly apply

This commit was SVN r15527.

The following SVN revision numbers were found above:
  r15517 --> open-mpi/ompi@41977fcc95
2007-07-20 01:10:34 +00:00
Ralph Castain
41977fcc95 Remove the cellid field from the orte_process_name_t structure. This only affects a handful of files in itself, but...
Cleanup ALL instances of output involving the printing of orte_process_name_t structures using the ORTE_NAME_ARGS macro so that the number of fields and type of data match. Replace those values with a new macro/function pair ORTE_NAME_PRINT that outputs a string (using the new thread safe data capability) so that any future changes to the printing of those structures can be accomplished with a change to a single point.

Note that I could not possibly find outputs that directly print the orte_process_name_t fields, but only dealt with those that used ORTE_NAME_ARGS. Hence, you may still have a few outputs that bark during compilation. Also, I could only verify those that fall within environments I can compile on, so other environments may yield some minor warnings.

This commit was SVN r15517.
2007-07-19 20:56:46 +00:00
Josh Hursey
84f102c343 Fix/Cleanup the Checkpoint Error propagation through the Snapc Full component.
This commit was SVN r15175.
2007-06-22 16:14:25 +00:00
Josh Hursey
b9da59ebc3 Fix the way we determine which sequence number to restart with.
Create a sentinel value in the metadata file to clearly indicate
that the sequence number is complete (versus in progress). This
way we do not try to restart from an invalid sequence number
which can lead to badness.

This commit was SVN r14423.
2007-04-19 15:04:27 +00:00
Josh Hursey
6ee0c641fd Cleanup the output from orte-checkpoint so it is a bit more clear and references
the sequence number.

Before:
[...] Finished - Global Snapshot Reference: ompi_global_snapshot_1234.ckpt

After:
Snashot Ref.:   1 ompi_global_snapshot_1234.ckpt

This commit was SVN r14381.
2007-04-15 14:28:56 +00:00
George Bosilca
01a4f56369 Mostly DECLSPEC cleanups and some include corrections.
This commit was SVN r14186.
2007-04-01 16:08:27 +00:00
Josh Hursey
101a2abd09 - Be more careful with parens
- Run the destructor *before* shutting things down.

This commit was SVN r14064.
2007-03-19 17:33:20 +00:00
Josh Hursey
d03073e87d Make sure to protect the finalize call so tools like ompi_info
do not segv.

This commit was SVN r14054.
2007-03-17 19:47:54 +00:00
Josh Hursey
dadca7da88 Merging in the jjhursey-ft-cr-stable branch (r13912 : HEAD).
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.

This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.

This commit closes trac:158

More details to follow.

This commit was SVN r14051.

The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
  r13912

The following Trac tickets were found above:
  Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
2007-03-16 23:11:45 +00:00