Basically, the method employed here is to have a recv create a zero-time timer event that causes the event library to execute a function that processes the message once the recv returns. Thus, any action taken as a result of processing the message occur outside of a recv.
Created two new macros to assist:
ORTE_MESSAGE_EVENT: creates the zero-time event, passing info in a new orte_message_event_t object
ORTE_PROGRESSED_WAIT: while waiting for specified conditions, just calls progress so messages can be recv'd.
Also fixed the failed_launch function as we no longer block in the orted callback function. Updated the error messages to reflect revision. No change in API to this function, but PLM "owners" may want to check their internal error messages to avoid duplication and excessive output.
This has been tested on Mac, TM, and SLURM.
This commit was SVN r17647.
methods (in order of precedence):
1. #pragma ident <ident string> (e.g., Intel and Sun)
1. #ident <ident string> (e.g., GCC)
1. static const char ident[] = <ident string> (all others)
By default, the ident string used is the standard Open MPI version string. Only
the following libraries will get the embedded version strings (e.g., DSOs will
not):
* libmpi.so
* libmpi_cxx.so
* libmpi_f77.so
* libopen-pal.so
* libopen-rte.so
* Added two new configure options:
* `--with-package-name="STRING"` (defaults to "Open MPI username@hostname
Distribution"). `STRING` is displayed by `ompi_info` next to the "Package"
heading.
* `--with-ident-string="STRING"` (defaults to the standard Open MPI version
string - e.g., X.Y.Zr######). `%VERSION%` will expand to the Open MPI
version string if it is supplied to this configure option.
This commit was SVN r16644.
This commit introduces the necessary logic to avoid that conflict. If a PLS component can identify that a daemon has failed, then we will set a flag indicating that fact. The xcast system will subsequently check that flag and, if it is set, will send all messages direct to the recipient. In the case of "kill local procs" and "terminate", the messages will go directly to each orted, thus bypassing any orted that has failed.
In addition, the xcast system will -not- wait for the messages to complete, but will return immediately (i.e., operate in non-blocking mode). Orterun will wait (via an event timer) for a period of time based on the number of daemons in the system to allow the messages to attempt to be delivered - at the end of that time, orterun will simply exit, alerting the user to the problem and -strongly- recommending they run orte-clean.
I could only test this on slurm for the case where all daemons unexpectedly died - srun apparently only executes its waitpid callback when all launched functions terminate. I have asked that Jeff integrate this capability into the OOB as he is working on it so that we execute it whenever a socket to an orted is unexpectedly closed. Meantime, the functionality will rarely get called, but at least the logic is available for anyone whose environment can support it.
This commit was SVN r16451.
* Fix some missing includes in a few places.
* Add the cr_request() functionality to the BLCR CRS component.
We are now dependent upon the 0.6.* series of BLCR.
* Made the CR notification mechanism a registered function.
This way we can have an OPAL-only version and it can be replaced at
runtime with the ORTE version.
* Add a 'opal_cr_allow_opal_only' parameter that will enable OPAL-only
CR functionality when the user wants it. Default: Disabled.
* Fix the placement of a checkpoint request check in MPI_Init
* Pull the OPAL notification mechanism into the SnapC framework.
* We no longer fork/exec the 'opal-checkpoint' command for local
checkpointing, the Local coordinator in the orted does this directly.
* The Local and Application coordinator talk together bypassing the OPAL
notifiation mechanism.
* Optimized the Local <-> App Coordinator communication.
* Improved the structure used to track vpid_snapshots in the local coord.
* Fix a race condition in which an application under heavy communication load
may produce an inconsistent global checkpoint.
This commit was SVN r16389.
The commit has been tested for C/R and Cray operations, and on Odin (SLURM, rsh) and RoadRunner (TM). I tried to update all environments, but obviously could not test them. I know that Windows needs some work, and have highlighted what is know to be needed in the odls process component.
This represents a lot of work by Brian, Tim P, Josh, and myself, with much advice from Jeff and others. For posterity, I have appended a copy of the email describing the work that was done:
As we have repeatedly noted, the modex operation in MPI_Init is the single greatest consumer of time during startup. To-date, we have executed that operation as an ORTE stage gate that held the process until a startup message containing all required modex (and OOB contact info - see #3 below) info could be sent to it. Each process would send its data to the HNP's registry, which assembled and sent the message when all processes had reported in.
In addition, ORTE had taken responsibility for monitoring process status as it progressed through a series of "stage gates". The process reported its status at each gate, and ORTE would then send a "release" message once all procs had reported in.
The incoming changes revamp these procedures in three ways:
1. eliminating the ORTE stage gate system and cleanly delineating responsibility between the OMPI and ORTE layers for MPI init/finalize. The modex stage gate (STG1) has been replaced by a collective operation in the modex itself that performs an allgather on the required modex info. The allgather is implemented using the orte_grpcomm framework since the BTL's are not active at that point. At the moment, the grpcomm framework only has a "basic" component analogous to OMPI's "basic" coll framework - I would recommend that the MPI team create additional, more advanced components to improve performance of this step.
The other stage gates have been replaced by orte_grpcomm barrier functions. We tried to use MPI barriers instead (since the BTL's are active at that point), but - as we discussed on the telecon - these are not currently true barriers so the job would hang when we fell through while messages were still in process. Note that the grpcomm barrier doesn't actually resolve that problem, but Brian has pointed out that we are unlikely to ever see it violated. Again, you might want to spend a little time on an advanced barrier algorithm as the one in "basic" is very simplistic.
Summarizing this change: ORTE no longer tracks process state nor has direct responsibility for synchronizing jobs. This is now done via collective operations within the MPI layer, albeit using ORTE collective communication services. I -strongly- urge the MPI team to implement advanced collective algorithms to improve the performance of this critical procedure.
2. reducing the volume of data exchanged during modex. Data in the modex consisted of the process name, the name of the node where that process is located (expressed as a string), plus a string representation of all contact info. The nodename was required in order for the modex to determine if the process was local or not - in addition, some people like to have it to print pretty error messages when a connection failed.
The size of this data has been reduced in three ways:
(a) reducing the size of the process name itself. The process name consisted of two 32-bit fields for the jobid and vpid. This is far larger than any current system, or system likely to exist in the near future, can support. Accordingly, the default size of these fields has been reduced to 16-bits, which means you can have 32k procs in each of 32k jobs. Since the daemons must have a vpid, and we require one daemon/node, this also restricts the default configuration to 32k nodes.
To support any future "mega-clusters", a configuration option --enable-jumbo-apps has been added. This option increases the jobid and vpid field sizes to 32-bits. Someday, if necessary, someone can add yet another option to increase them to 64-bits, I suppose.
(b) replacing the string nodename with an integer nodeid. Since we have one daemon/node, the nodeid corresponds to the local daemon's vpid. This replaces an often lengthy string with only 2 (or at most 4) bytes, a substantial reduction.
(c) when the mca param requesting that nodenames be sent to support pretty error messages, a second mca param is now used to request FQDN - otherwise, the domain name is stripped (by default) from the message to save space. If someone wants to combine those into a single param somehow (perhaps with an argument?), they are welcome to do so - I didn't want to alter what people are already using.
While these may seem like small savings, they actually amount to a significant impact when aggregated across the entire modex operation. Since every proc must receive the modex data regardless of the collective used to send it, just reducing the size of the process name removes nearly 400MBytes of communication from a 32k proc job (admittedly, much of this comm may occur in parallel). So it does add up pretty quickly.
3. routing RML messages to reduce connections. The default messaging system remains point-to-point - i.e., each proc opens a socket to every proc it communicates with and sends its messages directly. A new option uses the orteds as routers - i.e., each proc only opens a single socket to its local orted. All messages are sent from the proc to the orted, which forwards the message to the orted on the node where the intended recipient proc is located - that orted then forwards the message to its local proc (the recipient). This greatly reduces the connection storm we have encountered during startup.
It also has the benefit of removing the sharing of every proc's OOB contact with every other proc. The orted routing tables are populated during launch since every orted gets a map of where every proc is being placed. Each proc, therefore, only needs to know the contact info for its local daemon, which is passed in via the environment when the proc is fork/exec'd by the daemon. This alone removes ~50 bytes/process of communication that was in the current STG1 startup message - so for our 32k proc job, this saves us roughly 32k*50 = 1.6MBytes sent to 32k procs = 51GBytes of messaging.
Note that you can use the new routing method by specifying -mca routed tree - if you so desire. This mode will become the default at some point in the future.
There are a few minor additional changes in the commit that I'll just note in passing:
* propagation of command line mca params to the orteds - fixes ticket #1073. See note there for details.
* requiring of "finalize" prior to "exit" for MPI procs - fixes ticket #1144. See note there for details.
* cleanup of some stale header files
This commit was SVN r16364.
int to void. This function call exit at the end, so there is no way to
return from there. Apply the same thing to the errmsg_abort function and
update all components.
This commit was SVN r15704.
* General TCP cleanup for OPAL / ORTE
* Simplifying the OOB by moving much of the logic into the RML
* Allowing the OOB RML component to do routing of messages
* Adding a component framework for handling routing tables
* Moving the xcast functionality from the OOB base to its own framework
Includes merge from tmp/bwb-oob-rml-merge revisions:
r15506, r15507, r15508, r15510, r15511, r15512, r15513
This commit was SVN r15528.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15506
r15507
r15508
r15510
r15511
r15512
r15513
Cleanup ALL instances of output involving the printing of orte_process_name_t structures using the ORTE_NAME_ARGS macro so that the number of fields and type of data match. Replace those values with a new macro/function pair ORTE_NAME_PRINT that outputs a string (using the new thread safe data capability) so that any future changes to the printing of those structures can be accomplished with a change to a single point.
Note that I could not possibly find outputs that directly print the orte_process_name_t fields, but only dealt with those that used ORTE_NAME_ARGS. Hence, you may still have a few outputs that bark during compilation. Also, I could only verify those that fall within environments I can compile on, so other environments may yield some minor warnings.
This commit was SVN r15517.
We no longer store whether we are a singleton in a MCA parameter, we now use a global constant. So all references to the MCA parameter must be removed.
This commit was SVN r15408.
The following SVN revision numbers were found above:
r15390 --> open-mpi/ompi@bd65f8ba88
The problem stemmed from no longer launching a local orted on the same node as mpirun. The orted would save and reuse the base environment. Mpirun didn't do that, and the odls was using the orted's globally saved environment (which wasn't being set).
This fix establishes a globally accessible base launch environment that both the orted and mpirun can utilize. Since we now use that, we don't need to pass it to the odls_launch_proc function, so remove that param from the API (and modify all components to handle the change).
This commit was SVN r15405.
Short description: major changes include -
1. singletons now fork/exec a local daemon to manage their operations.
2. the orte daemon code now resides in libopen-rte
3. daemons no longer use the orte triggering system during startup. Instead, they directly call back to their parent pls component to report ready to operate. A base function to count the callbacks has been provided.
I have modified all the pls components except xcpu and poe (don't understand either well enough to do it). Full functionality has been verified for rsh, SLURM, and TM systems. Compile has been verified for xgrid and gridengine.
This commit was SVN r15390.
* Making some symbols and types be global (vs. static) in orterun
* Adding a "ddt" entry in the MCA parameter orte_base_user_debugger
default value
* Add support for @executable@, @executable_argv@, and @single_app@
tokens in the orte_base_user_debugger MCA parameter.
* Added various error checks and corresponding help messages after
finding a debugger in the PATH
Fixes trac:1081
This commit was SVN r15323.
The following Trac tickets were found above:
Ticket 1081 --> https://svn.open-mpi.org/trac/ompi/ticket/1081
single threaded builds. In its default configuration, all this does
is ensure that there's at least a good chance of threads building
based on non-threaded development (since the variable names will be
checked). There is also code to make sure that a "mutex" is never
"double locked" when using the conditional macro mutex operations.
This is off by default because there are a number of places in both
ORTE and OMPI where this alarm spews mega bytes of errors on a
simple test. So we have some work to do on our path towards
thread support.
Also removed the macro versions of the non-conditional thread locks,
as the only places they were used, the author of the code intended
to use the conditional thread locks. So now you have upper-case
macros for conditional thread locks and lowercase functions for
non-conditional locks. Simple, right? :).
This commit was SVN r15011.
1. generalize orte_rml.xcast to become a general broadcast-like messaging system. Messages can now be sent to any tag on the daemons or processes. Note that any message sent via xcast will be delivered to ALL processes in the specified job - you don't get to pick and choose. At a later date, we will introduce an augmented capability that will use the daemons as relays, but will allow you to send to a specified array of process names.
2. extended orte_rml.xcast so it supports more scalable message routing methodologies. At the moment, we support three: (a) direct, which sends the message directly to all recipients; (b) linear, which sends the message to the local daemon on each node, which then relays it to its own local procs; and (b) binomial, which sends the message via a binomial algo across all the daemons, each of which then relays to its own local procs. The crossover points between the algos are adjustable via MCA param, or you can simply demand that a specific algo be used.
3. orteds no longer exhibit two types of behavior: bootproxy or VM. Orteds now always behave like they are part of a virtual machine - they simply launch a job if mpirun tells them to do so. This is another step towards creating an "orteboot" functionality, but also provided a clean system for supporting message relaying.
Note one major impact of this commit: multiple daemons on a node cannot be supported any longer! Only a single daemon/node is now allowed.
This commit is known to break support for the following environments: POE, Xgrid, Xcpu, Windows. It has been tested on rsh, SLURM, and Bproc. Modifications for TM support have been made but could not be verified due to machine problems at LANL. Modifications for SGE have been made but could not be verified. The developers for the non-verified environments will be separately notified along with suggestions on how to fix the problems.
This commit was SVN r15007.
symbols in them and environ is defined only in the final application
(probably in crt1.o). Apple provides a function for getting at the
environment, so use that instead if it's available.
This commit was SVN r14857.
OPAL and ORTE. Since we now do opal_progress_init(), we do it
there. Fixes a performance issue introduced in r14773.
* While trying to find the above, notived that we did the reference
counting for the init in init_util and for finalize in fini. That
isn't right, so make them both in the non-util versions.
This commit was SVN r14830.
The following SVN revision numbers were found above:
r14773 --> open-mpi/ompi@1e678c3f55
This commit moves the initalization/finalization of opal_event and opal_progress
to opal_init/finalize. These were previously init/final in ORTE which is an
abstraction violation. After talking about it we concluded that there are no
ordering issues that require these to be init/final in ORTE instead of OPAL.
I ran the IBM test suite against this commit and it didn't turn up any new
failures so I think it is good to go.
Let us know if this causes problems.
This commit was SVN r14773.
The primary change that underlies all this is in the OOB. Specifically, the problem in the code until now has been that the OOB attempts to resolve an address when we call the "send" to an unknown recipient. The OOB would then wait forever if that recipient never actually started (and hence, never reported back its OOB contact info). In the case of an orted that failed to start, we would correctly detect that the orted hadn't started, but then we would attempt to order all orteds (including the one that failed to start) to die. This would cause the OOB to "hang" the system.
Unfortunately, revising how the OOB resolves addresses introduced a number of additional problems. Specifically, and most troublesome, was the fact that comm_spawn involved the immediate transmission of the rendezvous point from parent-to-child after the child was spawned. The current code used the OOB address resolution as a "barrier" - basically, the parent would attempt to send the info to the child, and then "hold" there until the child's contact info had arrived (meaning the child had started) and the send could be completed.
Note that this also caused comm_spawn to "hang" the entire system if the child never started... The app-failed-to-start helped improve that behavior - this code provides additional relief.
With this change, the OOB will return an ADDRESSEE_UNKNOWN error if you attempt to send to a recipient whose contact info isn't already in the OOB's hash tables. To resolve comm_spawn issues, we also now force the cross-sharing of connection info between parent and child jobs during spawn.
Finally, to aid in setting triggers to the right values, we introduce the "arith" API for the GPR. This function allows you to atomically change the value in a registry location (either divide, multiply, add, or subtract) by the provided operand. It is equivalent to first fetching the value using a "get", then modifying it, and then putting the result back into the registry via a "put".
This commit was SVN r14711.
assumptions in the FT restart code for the ORTE layer.
This fixes those problems by having the RML completely shutdown and
restart the OOB framework (instead of just the module as before).
This makes it much easier to manage, and maintainable as the OOB
changes in the future.
The SDS now does communication as part of its startup procedure, so
we need to make sure we restart the RML before the SDS so that it can
communicate properly.
OOB base [close|open] used a static bool to determine if they have
been called previously or not. I needed to expose this boolean so
that I can close() then open() the oob base in the restart procedure.
The functionality has not changed, we just now have the ability to
open/close the framework as many times as we need to as long as we
always call them in that order. (So calling open twice in a row is not allowed
as before, it is only allowed if you open(), close(), then open() again).
Things seem to be working now.
This commit was SVN r14515.
This completes the minor changes required to the PLS components. Basically, there is a small change required to the parameter list of the orted cmd functions. I caught and did it for xcpu and poe, in addition to the components listed in my email - so I think that only leaves xgrid unconverted.
The orted fail-to-start mods will also make changes in the PLS components, but those can be localized so they come in one at a time.
This commit was SVN r14499.
There is a binomial algorithm in the code (i.e., the HNP would send to a subset of the orteds, which then relay it on according to the typical log-2 algo), but that has a bug in it so the code won't let you select it even if you tried (and the mca param doesn't show, so you'd *really* have to try).
This also involved a slight change to the oob.xcast API, so propagated that as required.
Note: this has *only* been tested on rsh, SLURM, and Bproc environments (now that it has been transferred to the OMPI trunk, I'll need to re-test it [only done rsh so far]). It should work fine on any environment that uses the ORTE daemons - anywhere else, you are on your own... :-)
Also, correct a mistake where the orte_debug_flag was declared an int, but the mca param was set as a bool. Move the storage for that flag to the orte/runtime/params.c and orte/runtime/params.h files appropriately.
This commit was SVN r14475.
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
remote nodes. It will also kill off rogue orteds and orterun
processes. The killing of processes is ifdef'ed out for Windows
since I do not know how to do it there. Note that this change
will requite an autogen.
This commit was SVN r13477.
yesterday and set it to "true" in orte_init(). But ompi_mpi_init()
doesn't call orte_init() -- it calls orte_init_stage1() and
orte_init_stage2(). So orte_initialized was never set to true, and
Badness happend from there (w.r.t. ompi_mpi_abort()).
This patch moves the setting of orte_initialized to orte_init_stage2()
so that everyone will always get it set properly.
It also moves setting orte_universe_info.state to RUNNING into
stage2() as well -- Ralph confirmed that that should have been there
for the same reasons that orte_initialized needs to be there.
This commit was SVN r13374.
completed successfully, Bad Things(tm) could happen.
* Now we explicitly check orte_initialized (a new global in ORTE
indicating whether we are between orte_init() and orte_finalize()
or not), and if so, react accordingly.
* If ORTE is initialized, use orte_system_info.nodename; otherwise,
use gethostname().
* Add loop protection to ensure that ompi_mpi_abort() is not invoked
multiple times recursively.
This commit was SVN r13354.
the ORTE_DAEMON_CMD type. Which, unfortunately, is used all over
the place. Without this, we get error:
[msc01:12341] [0,0,0] ORTE_ERROR_LOG: Data pack failed in file ../../ompi-trunk/orte/dss/dss_pack.c at line 83
[msc01:12341] [0,0,0] ORTE_ERROR_LOG: Data pack failed in file ../../ompi-trunk/orte/dss/dss_pack.c at line 58
[msc01:12341] [0,0,0] ORTE_ERROR_LOG: Data pack failed in file ../../../../ompi-trunk/orte/mca/pls/base/pls_base_orted_cmds.c at line 136
This commit was SVN r13320.
1. add a "cancel_operation" API to the pls components that allows orterun to demand that an orted operation (e.g., terminate_job) be immediately cancelled and abandoned.
2. changes the pls orted commands from blocking to non-blocking. This allows us to interrupt those operations should an orted be non-responsive. The change also adds an orte_abort_timeout that limits how long orterun will automatically wait for the orteds to respond - if the terminate command, for example, doesn't see orted response within that time, then we printout an appropriate error message and just give up.
3. modifies orterun to allow multiple ctrl-c's to simply abort the program even if the orteds have not responded
4. does some cleanup on the orte-level mca params so that their implementation looks a lot more like that of ompi - makes it easier to maintain. This change also includes the definition of an orte_abort_timeout struct and associated MCA param (can't have too many!) so you can set the time after which orterun gives up on waiting for orteds to respond
This needs more testing before migrating to 1.2.
This commit was SVN r13304.
but remove them also. This current set of changes will affect
nothing as no one is making use of this ability. However, orte-clean
will be changed soon to utilize this new feature.
This commit was SVN r12996.
This has now been corrected. The singleton startup will dutifully call the mapper framework so that the proper data storage locations get initialized. Unfortunately, we then had to instruct the RMAPS not to allocate a vpid range for this job - otherwise, it would make a mistake and think there were two processes in it. Hence, a change was required to RMAPS to tell it "map this job, but don't allocate a vpid range for it".
This change will need to migrate across to 1.2 after it "soaks" the appropriate time.
This commit was SVN r12952.
Also, take the first step in updating how we handle mca params in ORTE - bring it closer to how it is done in the other two layers. Much more work to be done here.
This commit was SVN r12838.
the same time, remove some of the MPI-related options from OPAL:
- provide mechanism to change at runtime whether sched_yield() should
be called when the progress engine is idle
- provide mechanism for changing the rate at which the event engine
is called when there are "no" users of the event engine (ie, when
using MPI but not TCP)
- fix some function names in the progress engine to better match
their intended use (and remove MPI naming scheme)
- remove progress_mpi_enable / progress_mpi_disable because
we can now use the functions to set the sched_yield and
tick rate interfaces
- rename opal_progress_events() to opal_progress_set_event_flag()
because the first really isn't descriptive of what the function
does and I always got confused by it
This commit was SVN r12645.
Fix comm_spawn by singletons. orte_init does some voodoo to let the system know about localhost when we are a singleton. This includes allocating it so that any comm_spawn'd children can use their parent "allocation". Unfortunately, the fix that bproc needs (due to that smr filling up the node segment!) causes the singleton startup to fail. The fix is to just have the singleton startup force an allocation of its localhost.
Only issue here is: what happens if we are in a persistent universe? The singleton will now overwrite any prior info on slots used on localhost by other jobs (won't affect anything else). The answer, of course, is to do something more intelligent - lookup localhost on the registry and just update its info instead of overwriting it.
Something for another day (or month....or year)
This commit was SVN r12644.
Accordingly, there are new APIs to the name service to support the ability to get a job's parent, root, immediate children, and all its descendants. In addition, the terminate_job, terminate_orted, and signal_job APIs for the PLS have been modified to accept attributes that define the extent of their actions. For example, doing a "terminate_job" with an attribute of ORTE_NS_INCLUDE_DESCENDANTS will terminate the given jobid AND all jobs that descended from it.
I have tested this capability on a MacBook under rsh, Odin under SLURM, and LANL's Flash (bproc). It worked successfully on non-MPI jobs (both simple and including a spawn), and MPI jobs (again, both simple and with a spawn).
This commit was SVN r12597.
Get the ordering right so that a singleton can start.
Protect the rmgr copy app_context function from NULL fields
Tell the mapper it is okay for there not to be a pre-existing mapping plan for a parent when dynamically spawning processes
This commit was SVN r12257.
Fix the persistent daemon problem where it was exiting when a job completed. Problem was that the persistent daemon would order the job daemons to exit. They would then send an 'ack' back to the persistent daemon - but the ack consisted of an echo of the "exit" command, which was recv'd by the wrong listener who treated it as a properly sent cmd....and exited.
This commit was SVN r12243.
Fix the problem observed by multiple people that comm_spawned children were (once again) being mapped onto the same nodes as their parents. This was caused by going through the RAS a second time, thus overwriting the mapper's bookkeeping that told RMAPS where it had left off.
To solve this - and to continue moving forward on the ORTE development - we introduce the concept of attributes to control the behavior of the RM frameworks. I defined the attributes and a list of attributes as new ORTE data types to make it easier for people to pass them around (since they are now fundamental to the system, and therefore we will be packing and unpacking them frequently). Thus, all the functions to manipulate attributes can be implemented and debugged in one place.
I used those capabilities in two places:
1. Added an attribute list to the rmgr.spawn interface.
2. Added an attribute list to the ras.allocate interface. At the moment, the only attribute I modified the various RAS components to recognize is the USE_PARENT_ALLOCATION one (as defined in rmgr_types.h).
So the RAS components now know how to reuse an allocation. I have debugged this under rsh, but it now needs to be tested on a wider set of platforms.
This commit was SVN r12138.
- use the OPAL functions for PATH and environment variables
- make all headers C++ friendly
- no unamed structures
- no implicit cast.
Plus a full implementation for the orte_wait functions.
This commit was SVN r11347.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
Other changes:
1. Remove the old xcpu components as they are not functional.
2. Fix a "bug" in orterun whereby we called dump_aborted_procs even when we normally terminated. There is still some kind of bug in this procedure, however, as we appear to be calling the orterun job_state_callback function every time a process terminates (instead of only once when they have all terminated). I'll continue digging into that one.
This will require an autogen/configure, I'm afraid.
This commit was SVN r11228.
Clean up the remainder of the size_t references in the runtime itself. Convert to orte_std_cntr_t wherever it makes sense (only avoid those places where the actual memory size is referenced).
Remove the obsolete oob barrier function (we actually obsoleted it a long time ago - just never bothered to clean it up).
I have done my best to go through all the components and catch everything, even if I couldn't test compile them since I wasn't on that type of system. Still, I cannot guarantee that problems won't show up when you test this on specific systems. Usually, these will just show as "warning: comparison between signed and unsigned" notes which are easily fixed (just change a size_t to orte_std_cntr_t).
In some places, people didn't use size_t, but instead used some other variant (e.g., I found several places with uint32_t). I tried to catch all of them, but...
Once we get all the instances caught and fixed, this should once and for all resolve many of the heterogeneity problems.
This commit was SVN r11204.
- orte-clean.c : check to see if the base session directory is empty
and delete it if it is.
- orte_universe_exists.c : Fix a down stread problem resulting from
George's r10718 commit. Don't use the 'fulldirpath' since
that is no longer guarenteed to be the absolute path
to the session directory. Construct this value outside of that
function from the prefix and frontend vars.
This commit was SVN r10741.
The following SVN revision numbers were found above:
r10718 --> open-mpi/ompi@47eef2e002
After seeing the uglyness that is removing directories in the
codebase I decided to push down this to the OPAL by extending the
opal/os_create_dirpath.(c|h) to contain some more functionality.
In this process I renamed 'os_create_dirpath' to 'os_dirpath' since it
is a bit more general now.
Added a few functions to:
- check if an directory is empty
- check to see if the access permissions are set correctly
- destroy the directory at the end of the dirpath
- By using a caller callback function (a la Perl, I believe)
for every file, the caller can have fine grained control over
whether a specific file is deleted or not.
This simplifies things a bit for orte_session_dir_(finalize|cleanup)
as it should no longer contain any of this functionality, but uses
these functions to do the work.
From the external perspective nothing has changed, from the
developer point of view we have some cleaner, more generic code.
This commit was SVN r10640.
from the tmp/jjhursey-ft-cr branch.
In this commit we change the way universe names are created.
Before we by default first created "default-universe" then
if there was a conflict we created "default-universe-PID"
where PID is the PID of the HNP.
Now we create "default-universe-PID" all the time (when
a default universe name is used). This makes it much
easier when trying to find a HNP from an outside app
(e.g. orte-ps, orteconsole, ...)
This also adds a "search" function to find all of the
universes on the machine. This is useful in many contexts
when trying to find a persistent daemon or when trying to
connect to a HNP.
This commit also makes orte_universe_t an opal_object_t,
which is something that needed to happen, and only effected
the SDS in one of it's base functions.
I was asked to bring this over to aid in fixing orteconsole
and orteprobe. Due to the change of orte_universe_t to
an object orteprobe may need to be updated to reflect this
change. Since orteprobe needs to be looked at anyway I'll
leave this to Ralph to take care of.
*Note*:
These changes do not depend upon any of the FT work (but
the FT work does depend upon them). These were brought over
to help in fixing some of the ORTE tool set that require
the functionality layed out in this patch.
Testing:
Ran the 'ibm' tests before and after this change, and all was
as well as before the change. If anyone notices additional
irregularities in the system let me know. But none are expected.
This commit was SVN r10550.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
debugger scheme described in
http://www.open-mpi.org/community/lists/users/2005/10/0214.php. This
makes our user-level debugger scheme much more vendor-independent
(although the "-tv" option will still work for backwards compatibility
-- it'll just be a synonum of "--debug").
This commit was SVN r8206.
This takes care of Troy's first segfault problem, and compile errors that will likely happen as soon as Ken applies George's patch and runs make again.
This commit was SVN r7833.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
command:
svn merge -r 7567:7663 https://svn.open-mpi.org/svn/ompi/tmp/jjhursey-rmaps .
(where "." is a trunk checkout)
The logs from this branch are much more descriptive than I will put
here (including a *really* long description from last night). Here's
the short version:
- fixed some broken implementations in ras and rmaps
- "orterun --host ..." now works and has clearly defined semantics
(this was the impetus for the branch and all these fixes -- LANL had
a requirement for --host to work for 1.0)
- there is still a little bit of cleanup left to do post-1.0 (we got
correct functionality for 1.0 -- we did not fix bad implementations
that still "work")
- rds/hostfile and ras/hostfile handshaking
- singleton node segment assignments in stage1
- remove the default hostfile (no need for it anymore with the
localhost ras component)
- clean up pls components to avoid duplicate ras mapping queries
- [possible] -bynode/-byslot being specific to a single app context
This commit was SVN r7664.
Some of the functions in opal_init are void or return a bool (opal_output_init, but always returns true.. eh?), so I don't check them.
This commit was SVN r7638.
some orted's to stall on locks in the MPI Dynamics cases. Since it
is not essentual that we call these functions, they can so away.
Unlock the peer lock when aborting. This causes a potential deadlock
in do_waitall [see comment in code]. This was causing orteds to
deadlock at times when the seed had terminated. With proper interleaving
and timing the orted was deadlocking. This seems to have fixed this in
my stress testing with MPI 2 Dynamics.
This commit was SVN r7539.
However we do want to do a bit of cleanup on the node before we exit,
specificly clean out the session directory. I also had a couple of the
subsystems that don't depend upon peers (which is key) clean up as well.
Pedantic formatting issue in oob_tcp.h
This commit was SVN r7387.
that multiple processes don't overwrite each other. Change that
default in orte_init_stage1() to just "output-" (because the file will
be in a process-unique directory at that point; the pid is no longer
necessary).
This commit was SVN r7256.
opal_output_set_output_file_info(). This allows getting and setting
the default directory where output stream files will be opened (for
all *new* streams). Before this function is not invoked, the default
location is $TMPDIR or $HOME (if $TMPDIR is not defined).
Added a call into orte_init_stage1() to call this function
immediately after the session directory is created and set the default
location of stream files to be the process' session directory.
This commit was SVN r7254.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
CTRL-C'd.
We were calling orte_finalize recursively which caused a segv when it tried to
use a freed framework (orte_rmgr in this case).
I added a status flag to orte_universe_info to indicate where we are in the code.
This was needed to determine if we should call orte_abort or not when shutting
down in the tcp oob.
This commit was SVN r7160.
orte_init_stage1(), since not all ORTE processes call orte_init().
* Expad opal_error test case to make sure ORTE error codes print
properly
* Make project error codes start at easy values (OPAL is -1 to -100,
ORTE is -101 to -200, OMPI is less than -201) to make it easier
to figure out what an error code as an integer means. Also has
the nice property of not changing the values of error codes ever
time a new error code is added.
This commit was SVN r7061.
tree.
- fix up #include's throughout the tree (yay contrib/search_replace.pl!)
- remove a few extraneous #include's
- remove orte_sys_info*() from opal_init()/opal_finalize() (it's
already in orte_init_stage1() and orte_system_finalize())
- remove dependencies in opal on orte_system_info -- util/os_path.c
and util/os_create_dirpath.c (they only used path_sep, anyway --
easily changed to #defines)
This commit was SVN r7059.
- Change orte_base_infrastructre to orte_infrastructre to conform with
ompi_info's needs
- Move MCA Param registration in ORTE to a centralized function that is
called first in orte_init_stage1
- Set the infrastructre flag as an argument to orte_init
- Adjust initalization functions to properly pass down the infrastructre
flag.
This commit was SVN r7053.
OPAL_ERROR, same for all the other error codes. Also, make sure that there
are never conflicts between OPAL anr ORTE error codes (for example).
Finally, provide opal_perror(), opal_strerror(), and opal_strerror_r() to
give stringified error messages for the different error codes
This commit was SVN r6969.
- change the framework opens to [mostly] use the new MCA param API
- properly pass in framework debug output streams to the
mca_base_component_open() function
This commit was SVN r6888.
ns_replica.c
- Removed the error logging since I use this function in orte_init_stage1 to
check if we have created a cellid yet or not.
ras_types.h & rase_base_node.h
- This was an empty file. moved the orte_ras_node_t from base/ras_base_node.h
to this file.
- Changed the name of orte_ras_base_node_t to orte_ras_node_t to match the
naming mechanisms in place.
ras.h
- Exposed 2 functions:
- node_insert:
This takes a list of orte_ras_base_node_t's and places them in the Node
Segment of the GPR. This is to be used in orte_init_stage1 for singleton
processes, and the hostfile parsing (see rds_hostfile.c). This just puts
in the appropriate API interface to keep from calling the
orte_ras_base_node_insert function directly.
- node_query:
This is used in hostfile parsing. This just puts in the appropriate API
interface to keep from calling the orte_ras_base_node_query function
directly.
- Touched all of the implemented components to add reference to these new
function pointers
ras_base_select.c & ras_base_open.c
- Add and set the global module reference
rds.h
- Exposed 1 function:
- store_resource:
This stores a list of rds_cell_desc_t's to the Resource Segment.
This is used in conjunction with the orte_ras.node_insert function in
both the orte_init_stage1 for singleton processes and rds_hostfile.c
rds_base_select.c & rds_base_open.c
- Add and set the global module reference
rds_hostfile.c
- Added functionality to create a new cellid for each hostfile, placing
each entry in the hostfile into the same cellid. Currently this is
commented out with the cellid hard coded to 0, with the intention of
taking this out once ORTE is able to handle multiple cellid's
- Instead of just adding hosts to the Node Segment via a direct call to
the ras_base_node_insert() function. First add the hosts to the Resource
Segment of the GPR using the orte_rds.store_resource() function then use
the API version of orte_ras.node_insert() to store the hosts on the Node
Segment.
- Add 1 new function pointer to module as required by the API.
rds_hostfile_component.c
- Converted this to use the new MCA parameter registration
orte_init_stage1.c
- It is possible that a cellid was not created yet for the current environment.
So I put in some logic to test if the cellid 0 existed. If it does then
continue, otherwise create the cellid so we can properly interact with the
GPR via the RDS.
- For the singleton case we insert some 'dummy' data into the GPR. The RAS
matches this logic, so I took out the duplicate GPR put logic, and
replaced it with a call to the orte_ras.node_insert() function.
- Further before calling orte_ras.node_insert() in the singleton case,
we also call orte_rds.store_resource() to add the singleton node to the
Resource Segment.
Console:
- Added a bunch of new functions. Still experimenting with many aspects of the
implementation. This is a checkpoint, and has very limited functionality.
- Should not be considered stable at the moment.
This commit was SVN r6813.
using orteprobe.
Created a header file for orte_setup_hnp. [HNP = Head Node Process]
General cleanup and added a bit of documentation in orte_setup_hnp.c
Also fixed a cellid tokens issue (circa line 285)
Changed the launched scope from private to public
In orteprobe:
- added reference to orted.h to avoid duplicate header contents in orteprobe.h
- removed the version tag, and put in a verbose argument
- Fixed a buffer packing problem that was causing the parent from receiving the
proper contact information for the new daemon.
This commit was SVN r6802.
This required a little fiddling with a number of areas. Biggest problem was that it uncovered a potential for an infinite loop to be created in the registry. If a callback function modified the registry, the registry checked the triggers to see if anything had fired. Well, if the original callback was due to a trigger firing, that condition hadn't changed - so the trigger fired again....which caused the callback to be called, which modified the registry, which checked the triggers, etc. etc.
Triggers are now checked and then "flagged" as being "in process" so that the registry will NOT recheck that trigger until all callbacks have been processed. Tried doing this with subscriptions as well, but that caused a problem - when we release processes from a stagegate, they (at the moment) immediately place data on the registry that should cause a subscription to fire. Unfortunately, the system will just hang if that subscription doesn't get processed. So, I have left the subscription system alone - any callback function that modifies the registry in a fashion that will fire a subscription will indeed fire that subscription. We'll have to see if this causes problems - it shouldn't, but a careless user could lock things up if the callback generates a callback to itself.
Also fixed the code that placed a process' RML contact info on the registry to eliminate the leading '/' from the string.
This commit was SVN r6684.
test from orte_init_stage1 into a new framework, Startup Discovery Service
(sds). This allows us to have more flexibility with platforms like
Red Storm, which do not have a universe in the usual meaning and don't have
a seed daemon they can contact
This commit was SVN r6630.
* Add ability to completely disable libltdl (the dlopen code to load
dynamic shared objects) to configure: --disable-dlopen
* Added MCA param (component_disable_dlopen) to disable DSO loading
at runtime
* Made the event library behave in some not-completely-erroneous way
on platforms where it has absolutely no eventops support (ie, no
select, poll, or epoll)
* Disabled orte_wait, opal_few, and opal_daemon_init code on
platforms without fork, waitpid support. All non-init functions
will return OPMI_ERR_NOT_SUPPORTED
* Disable orteprobe tool when fork or pipe aren't supported
This commit was SVN r6490.
* rename ompi_malloc to opal_malloc
* rename ompi_numtostr to opal_numtostr
* start of rename of ompi_environ to opal_environ
This commit was SVN r6332.
* rename ompi_basename to opal_basename
* rename ompi bitop functions to opal
* rename ompi_cmd_line to opal_cmd_line
* rename ompi_sizet2int to opal_sizet2int
* rename orte_daemon_init to opal_daemon_init
* rename ompi_few to opal_few
This commit was SVN r6330.
