It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now.
This commit was SVN r27527.
The following SVN revision numbers were found above:
r27451 --> open-mpi/ompi@d59034e6ef
r27456 --> open-mpi/ompi@ecdbf34937
Uses new CUDA IPC support. Also, a few minor changes in PML to take
advantage of it.
This code has no effect unless user asks for it explicitly via
configure arguments. Otherwise, it is either #ifdef'ed out or
not compiled.
This commit was SVN r26039.
allows the BTL to specify a specific ompi_proc_t that had an
error. Also add an optional descriptive string. Currently, arguments
are not used but will be by future failover PML.
Changes based on RFC. Reviewed by George Bosilca.
This commit was SVN r23174.
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
- This patch solely _adds_ required headers and is rather localized
The next patch (after RFC) heavily removes headers (based on script)
- ompi/communicator/communicator.h: For sources that use
ompi_mpi_comm_world, don't require them to include "mpi.h"
- ompi/debuggers/ompi_common_dll.c: mca_topo_base_comm_1_0_0_t needs
#include "ompi/mca/topo/topo.h"
- ompi/errhandler/errhandler_predefined.h:
ompi/communicator/communicator.h depends on this header file!
To prevent recursion just have fwd declarations.
#include "ompi/types.h" for fwd declarations of the main structs.
- ompi/mca/btl/btl.h: #include "opal/types.h" for ompi_ptr_t
- ompi/mca/mpool/base/mpool_base_tree.c: We use ompi_free_list_t and
ompi_rb_tree_t, so have the proper classes
- ompi/mca/op/op.h:
Op is pretty self-contained: Nobody up to now has done
#include "opal/class/opal_object.h"
- ompi/mca/osc/pt2pt/osc_pt2pt_replyreq.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/base/base.h:
We use opal_lists
- ompi/mca/pml/dr/pml_dr_vfrag.h:
#include "opal/types.h" for ompi_ptr_t
- ompi/mca/pml/ob1/pml_ob1_hdr.h:
#include "ompi/mca/btl/btl.h" for mca_btl_base_segment_t
- opal/dss/dss_unpack.c:
#include "opal/types.h"
- opal/mca/base/base.h:
#include "opal/util/cmd_line.h" for opal_cmd_line_t
- orte/mca/oob/tcp/oob_tcp.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp.h:
#include "opal/threads/threads.h" for opal_thread_t
- orte/mca/oob/tcp/oob_tcp_msg.c:
#include "opal/types.h"
- orte/mca/oob/tcp/oob_tcp_peer.c:
#include "opal/types.h" for opal_socklen_t
- orte/mca/oob/tcp/oob_tcp_send.c:
#include "opal/types.h"
- orte/mca/plm/base/plm_base_proxy.c:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
- orte/mca/rml/base/rml_base_receive.c:
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/mca/rml/oob/rml_oob_recv.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/mca/rml/oob/rml_oob_send.c:
#include "opal/types.h" for ompi_iov_base_ptr_t
- orte/runtime/orte_data_server.c
#include "opal/util/output.h" for OPAL_OUTPUT_VERBOSE
- orte/runtime/orte_globals.h:
#include "orte/util/name_fns.h" for ORTE_NAME_PRINT
Tested on Linux/x86-64
This commit was SVN r20817.
get bitten by header depending on having already included
the corresponding [opal|orte|ompi]_config.h header.
When separating, things like [OPAL|ORTE|OMPI]_DECLSPEC
are missed.
Script to add the corresponding header in front of all following
(taking care of possible #ifdef HAVE_...)
- Including some minor cleanups to
- ompi/group/group.h -- include _after_ #ifndef OMPI_GROUP_H
- ompi/mca/btl/btl.h -- nclude _after_ #ifndef MCA_BTL_H
- ompi/mca/crcp/bkmrk/crcp_bkmrk_btl.c -- still no need for
orte/util/output.h
- ompi/mca/pml/dr/pml_dr_recvreq.c -- no need for mpool.h
- ompi/mca/btl/btl.h -- reorder to fit
- ompi/mca/bml/bml.h -- reorder to fit
- ompi/runtime/ompi_mpi_finalize.c -- reorder to fit
- ompi/request/request.h -- additionally need ompi/constants.h
- Tested on linux/x86-64
This commit was SVN r20720.
opal layer.
Add a check against a maximum (actually get rid of ifs internally to
opal_bitmap.c) -- the functionality to set the current maximum size
opal_bitmap_set_max_size() is currently only used in attribute.c
to set the maximum OMPI_FORTRAN_HANDLE_MAX...
Tested on linux/x86-64 with intel-tests with all_tests_no_perf_f
run with 6 procs.
Let's look into MTT as well...
This commit was SVN r20708.
Added a few comments and changed the return code after the FIFO write to be SUCCESS,
even if the FIFO write indicated an error. Such an error would only mean that the
FIFO was full, but the FIFO-write operation would still be queued. Therefore, the
PML should think of this as successful.
This commit was SVN r20644.
* add "register" function to mca_base_component_t
* converted coll:basic and paffinity:linux and paffinity:solaris to
use this function
* we'll convert the rest over time (I'll file a ticket once all
this is committed)
* add 32 bytes of "reserved" space to the end of mca_base_component_t
and mca_base_component_data_2_0_0_t to make future upgrades
[slightly] easier
* new mca_base_component_t size: 196 bytes
* new mca_base_component_data_2_0_0_t size: 36 bytes
* MCA base version bumped to v2.0
* '''We now refuse to load components that are not MCA v2.0.x'''
* all MCA frameworks versions bumped to v2.0
* be a little more explicit about version numbers in the MCA base
* add big comment in mca.h about versioning philosophy
This commit was SVN r19073.
The following Trac tickets were found above:
Ticket 1392 --> https://svn.open-mpi.org/trac/ompi/ticket/1392
1. The send path get shorter. The BTL is allowed to return > 0 to specify that the
descriptor was pushed to the networks, and that the memory attached to it is
available again for the upper layer. The MCA_BTL_DES_SEND_ALWAYS_CALLBACK flag
can be used by the PML to force the BTL to always trigger the callback.
Unmodified BTL will continue to work as expected, as they will return OMPI_SUCCESS
which force the PML to have exactly the same behavior as before. Some BTLs have
been modified: self, sm, tcp, mx.
2. Add send immediate interface to BTL.
The idea is to have a mechanism of allowing the BTL to take advantage of
send optimizations such as the ability to deliver data "inline". Some
network APIs such as Portals allow data to be sent using a "thin" event
without packing data into a memory descriptor. This interface change
allows the BTL to use such capabilities and allows for other optimizations
in the future. All existing BTLs except for Portals and sm have this interface
set to NULL.
This commit was SVN r18551.
- the registration array is now global instead of one by BTL.
- each framework have to declare the entries in the registration array reserved. Then
it have to define the internal way of sharing (or not) these entries between all
components. As an example, the PML will not share as there is only one active PML
at any moment, while the BTLs will have to. The tag is 8 bits long, the first 3
are reserved for the framework while the remaining 5 are use internally by each
framework.
- The registration function is optional. If a BTL do not provide such function,
nothing happens. However, in the case where such function is provided in the BTL
structure, it will be called by the BML, when a tag is registered.
Now, it's time for the second step... Converting OB1 from a switch based PML to an
active message one.
This commit was SVN r17140.
* Fix some missing includes in a few places.
* Add the cr_request() functionality to the BLCR CRS component.
We are now dependent upon the 0.6.* series of BLCR.
* Made the CR notification mechanism a registered function.
This way we can have an OPAL-only version and it can be replaced at
runtime with the ORTE version.
* Add a 'opal_cr_allow_opal_only' parameter that will enable OPAL-only
CR functionality when the user wants it. Default: Disabled.
* Fix the placement of a checkpoint request check in MPI_Init
* Pull the OPAL notification mechanism into the SnapC framework.
* We no longer fork/exec the 'opal-checkpoint' command for local
checkpointing, the Local coordinator in the orted does this directly.
* The Local and Application coordinator talk together bypassing the OPAL
notifiation mechanism.
* Optimized the Local <-> App Coordinator communication.
* Improved the structure used to track vpid_snapshots in the local coord.
* Fix a race condition in which an application under heavy communication load
may produce an inconsistent global checkpoint.
This commit was SVN r16389.
the ompi_convertor_need_buffers function to only return 0 if the convertor
is homogeneous (which it never does on the trunk, but does to on v1.2, but
that's a different issue). Only enable the heterogeneous rdma code for
a btl if it supports it (via a flag), as some btls need some work for this
to work properly. Currently only TCP and OpenIB extensively tested
This commit was SVN r15990.
that exactly describes the buffer to be used as the target of the
operation
* Use the above flag to disable components setting the flag from being
used for real RDMA operations for the one-sided component (the
BTLs will still be used for RDMA transfers for the PML and for
send/receive communication for the OSC component)
This commit was SVN r15375.
than just the PML/BTLs these days. Also clean up the code so that it
handles the situation where not all nodes register information for a given
node (rather than just spinning until that node sends information, like
we do today).
Includes r15234 and r15265 from the /tmp/bwb-modex branch.
This commit was SVN r15310.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15234
r15265
This is required to tighten up the BTL semantics. Ordering is not guaranteed,
but, if the BTL returns a order tag in a descriptor (other than
MCA_BTL_NO_ORDER) then we may request another descriptor that will obey
ordering w.r.t. to the other descriptor.
This will allow sane behavior for RDMA networks, where local completion of an
RDMA operation on the active side does not imply remote completion on the
passive side. If we send a FIN message after local completion and the FIN is
not ordered w.r.t. the RDMA operation then badness may occur as the passive
side may now try to deregister the memory and the RDMA operation may still be
pending on the passive side.
Note that this has no impact on networks that don't suffer from this
limitation as the ORDER tag can simply always be specified as
MCA_BTL_NO_ORDER.
This commit was SVN r14768.
We eagerly send data up to btl_*_eager_limit with the match
Upon ACK of the MATCH we start using send/receives of size
btl_*_max_send_size up to the btl_*_rdma_pipeline_offset
After the btl_*_rdma_pipeline_offset we begin using RDMA writes of
size btl_*_rdma_pipeline_frag_size.
Now, on a per message basis we only use the above protocol if the
message is larger than btl_*_min_rdma_pipeline_size
btl_*_eager_limit - > same
btl_*_max_send_size -> same
btl_*_rdma_pipeline_offset -> btl_*_min_rdma_size
btl_*_rdma_pipeline_frag_size -> btl_*_max_rdma_size
btl_*_min_rdma_pipeline_size is new..
This patch also moves all BTL common parameters initialisation into
btl_base_mca.c file.
This commit was SVN r14681.
This merge adds Checkpoint/Restart support to Open MPI. The initial
frameworks and components support a LAM/MPI-like implementation.
This commit follows the risk assessment presented to the Open MPI core
development group on Feb. 22, 2007.
This commit closes trac:158
More details to follow.
This commit was SVN r14051.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r13912
The following Trac tickets were found above:
Ticket 158 --> https://svn.open-mpi.org/trac/ompi/ticket/158
r12714) for supporting compilers / architectures with different
padding rules.
This commit was SVN r12749.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r12491
r12714
hits the buffer on the other side. For this kind of BTLs we need to send
FIN through the same BTL, PUT was performed with so network will handle
ordering for us. If we will use another BTL, receiver can get FIN before
data will hit the buffer and complete request prematurely. We mark such
problematic BTLs with MCA_BTL_FLAGS_FAKE_RDMA flag (this kind of RDMA
is really fake, because the real one guaranties that sender will see the
completion only after receiver's NIC confirmed that all the data was
received).
This commit was SVN r12732.
In order to provide backwards compatability the framework versions are bumped
and the handler registeration function is at the end of the btl struct.
Testing done on sm, openib, and gm..
This commit was SVN r11256.
the upperlayer assynchronously although there are some issues with this.. such
as there are multiple consumers of the btl's.. who get's the
This commit was SVN r11232.
implemented entirely on top of the PML. This allows us to have a
one-sided interface even when we are using the CM PML and MTLs for
point-to-point transport (and therefore not using the BML/BTLs)
* Old pt2pt component was renamed "rdma", as it will soon be having
real RDMA support added to it.
Work was done in a temporary branch. Commit is the result of the
merge command:
svn merge -r10862:11099 https://svn.open-mpi.org/svn/ompi/tmp/bwb-osc-pt2pt
This commit was SVN r11100.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r10862
r11099
