Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.
Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.
This commit was SVN r26242.
https://svn.open-mpi.org/trac/ompi/wiki/ProcessPlacement
The wiki page is incomplete at the moment, but I hope to complete it over the next few days. I will provide updates on the devel list. As the wiki page states, the default and most commonly used options remain unchanged (except as noted below). New, esoteric and complex options have been added, but unless you are a true masochist, you are unlikely to use many of them beyond perhaps an initial curiosity-motivated experimentation.
In a nutshell, this commit revamps the map/rank/bind procedure to take into account topology info on the compute nodes. I have, for the most part, preserved the default behaviors, with three notable exceptions:
1. I have at long last bowed my head in submission to the system admin's of managed clusters. For years, they have complained about our default of allowing users to oversubscribe nodes - i.e., to run more processes on a node than allocated slots. Accordingly, I have modified the default behavior: if you are running off of hostfile/dash-host allocated nodes, then the default is to allow oversubscription. If you are running off of RM-allocated nodes, then the default is to NOT allow oversubscription. Flags to override these behaviors are provided, so this only affects the default behavior.
2. both cpus/rank and stride have been removed. The latter was demanded by those who didn't understand the purpose behind it - and I agreed as the users who requested it are no longer using it. The former was removed temporarily pending implementation.
3. vm launch is now the sole method for starting OMPI. It was just too darned hard to maintain multiple launch procedures - maybe someday, provided someone can demonstrate a reason to do so.
As Jeff stated, it is impossible to fully test a change of this size. I have tested it on Linux and Mac, covering all the default and simple options, singletons, and comm_spawn. That said, I'm sure others will find problems, so I'll be watching MTT results until this stabilizes.
This commit was SVN r25476.
Fix a termination issue that caused procs local to mpirun to not be killed if they weren't calling into the library. Thanks to Terry Dontje for spending countless hours chasing his tail on this one! :-(
This commit was SVN r25285.
To enable the epochs and the resilient orte code, use the configure flag:
--enable-resilient-orte
This will define both:
ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE
This commit was SVN r25093.
refactoring to improve readability and to compute num_procs_alive
correctly and to remove the use of loop iteration variables for
two loops nested one inside another (causing MPI_Comm_spawn_multiple
to fail).
This commit was SVN r24903.
Also, fix an error in mpirx debugger module - the pointer array object is the pointer to the object itself, not the object "super" like in an opal_list.
This commit was SVN r24894.
Over the course of time, usage of static ports got corrupted in several places, the "parent" info got incorrectly reset, etc. So correct all that and get the regex-based wireup going again.
Also, don't pass node lists if static ports aren't enabled - they are of no value to the orted and just create the possibility of overly-long cmd lines.
This commit was SVN r24860.
Everyone will be starting at MIN anyway (until we implement restart of course)
so there's no reason to set the epoch to INVALID and then immediately reset them
to MIN. This way there's less room to make mistakes later.
This commit was SVN r24829.
Rename the memusage sensor plugin to "resusage" as it will soon be updated to include full process stat monitoring.
Extend the heartbeat sensor to report node and process stats in the heartbeat.
Store the process and node stats in their respective orte_xxx_t object.
This commit was SVN r24629.
Provide a new MCA param that allows the user to direct that we abort the job once a process exits with non-zero status. No recovery is allowed in such cases to avoid trying to restart a process that has already exited MPI.
This commit was SVN r24614.
I want to thank Hugo Meyer for reporting this/these bugs.
Notes:
* Moved over a patch from the stabilization branch that makes sure we close the peer socket in the OOB TCP component fully during shutdown (after the de-registration sync). It also ensures that we free the rml_uri only after we are done communicating with the peer (in the odls_base deregister sync operation).
* When an error is detected while delivering messages, we really want to bail out of the loop since the error manager is likely mutating the orte_local_children data structure, so it is no longer safe to iterate over in the orte_odls_base_default_deliver_message() function.
* When the HNP is hosting processes make sure it accounts for processes that may have failed locally in the ErrMgr HNP component by decrementing the num_local_procs. This makes it match the orted ErrMgr component accounting. This is what was causing the modex to fail (the number of participants was wrong on a rolling recovery.
* The crmig and autor features of the hnp ErrMgr component now check for the jobid from both the 'job' parameter and from the process name (since one may be there and not the other). This caused some additional error messages during startup.
* If we fail to migrate (e.g., due to invalid node specification), print only the error message, not the error and success messages. This can be misleading.
This commit was SVN r24317.
Restore the use of override_oversubscribe to indicate that the data source for resources on the backend nodes used in mapping is unreliable. In this situation (e.g., data came from hostfile, or we are just using localhost because nothing was provided), we don't trust the oversubscribe condition passed by the mapper. Instead, we check locally to ensure we set sched_yield correctly.
This commit was SVN r24130.
I did not want to make this change globally since there could be good reason to keep the check before calling SIGKILL that I am not seeing at the moment.
This commit was SVN r23821.
extravaganza.
= Short version =
This commit does several things, but the short version is that it
re-orients the error message creation of the ODLS default module to
generate error strings in the child process for errors that occur
after the fork but before the exec (such errors are ''usually''
related to paffinity). A show_help string is rendered in the child
and then IPC'ed up to the parent, who displays the string through
normal ORTE show_help aggregation mechanisms. We also broke up the
ginormous paffinity-setting logic into a few separate functions, both
to help us understand the code, and hopefully to ease future
maintenance.
The logic for the ODLS default binding should not have changed -- this
is mainly a code reshuffle and improvement on error reporting.
= Rationale =
The reasoning for this commit is complex. As mentioned above, it's
the first step in some paffinity cleanup. Here's the line of dominoes
that must fall (in this order):
1. Add hwloc paffinity component (already done).
1. While testing hwloc, we discovered that the error reporting from
the ODLS default module was abysmal. So we fixed it.
1. Further, we reorganized the code in the odsl_default_module.c a bit
to help our understanding of it.
1. We also discovered a few bugs in the original ODLS default module
logic that existed before this code shuffle; separate tickets
will be filed to fix them.
1. Next up will be some improvements to paffinity / odls default to
make the act of binding to a core ensure to bind to ''all''
hardware threads contained in that core (similar for sockets:
binding to a socket will bind to ''all'' hardware threads in that
socket).
1. Next will be improvements to paffinity to expose binding to
hardware threads through the paffinity framework API.
1. Finally, we'll expose these binding controls to the user (e.g.,
through mpirun command line arguments, MCA parameters, etc.).
This commit represents the first few bullets; the last 4 bullets are
being worked on right now, but there is no definite timeline for
completion.
= Miscelaneous =
A few points worth mentioning:
* We have tested this new code a bunch; we're pretty sure it behaves
just like the trunk -- but with better / more precise error
reporting. More testing is needed on a wider array of platforms,
however.
* A big comment at the top of odls_default_module.c explains the
(new) general scheme for the error reporting.
* The error reporting in the parent process is now really dumb;
almost all the intelligence about creating error messages is in the
child.
* The show_help file was renamed to be more consistent with other
help files (help-odls-default.txt -> help-orte-odls-default.txt)
* Removed the use of sched_yield() because of recent changes in the
Linux 2.6.3x kernels. We already had an #else clause for
select()'ing for 1us if we didn't have sched_yield() -- that is now
the only code path. This is not a performance-critical section of
the code, so this shouldn't be controversial.
* Replaced the macro-based error reporting with function-based
reporting. It's a bit more bulky, but it helped us understand the
code and saved us multiple times with compile-time parameter
checking, etc.
* Cleaned up the use of several show_help messages to ensure that
they mapped to real messages in help*.txt files.
This commit was SVN r23652.
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php
Documentation:
http://osl.iu.edu/research/ft/
Major Changes:
--------------
* Added C/R-enabled Debugging support.
Enabled with the --enable-crdebug flag. See the following website for more information:
http://osl.iu.edu/research/ft/crdebug/
* Added Stable Storage (SStore) framework for checkpoint storage
* 'central' component does a direct to central storage save
* 'stage' component stages checkpoints to central storage while the application continues execution.
* 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress)
* 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching)
* Added Compression (compress) framework to support
* Add two new ErrMgr recovery policies
* {{{crmig}}} C/R Process Migration
* {{{autor}}} C/R Automatic Recovery
* Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component
* Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option)
* {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342)
* {{{OMPI_CR_Restart}}}
* {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules)
* {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192)
* {{{OMPI_CR_Quiesce_start}}}
* {{{OMPI_CR_Quiesce_checkpoint}}}
* {{{OMPI_CR_Quiesce_end}}}
* {{{OMPI_CR_self_register_checkpoint_callback}}}
* {{{OMPI_CR_self_register_restart_callback}}}
* {{{OMPI_CR_self_register_continue_callback}}}
* The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future.
* Add a progress meter to:
* FileM rsh (filem_rsh_process_meter)
* SnapC full (snapc_full_progress_meter)
* SStore stage (sstore_stage_progress_meter)
* Added 2 new command line options to ompi-restart
* --showme : Display the full command line that would have been exec'ed.
* --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413)
* Deprecated some MCA params:
* crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir
* snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir
* snapc_base_global_shared deprecated, use sstore_stage_global_is_shared
* snapc_base_store_in_place deprecated, replaced with different components of SStore
* snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref
* snapc_base_establish_global_snapshot_dir deprecated, never well supported
* snapc_full_skip_filem deprecated, use sstore_stage_skip_filem
Minor Changes:
--------------
* Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing.
* Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components
* Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it.
* Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}}
* Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set.
* opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality.
* Cleanup the CRS framework and components to work with the SStore framework.
* Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably).
* Add 'quiesce' hook to CRCP for a future enhancement.
* We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}.
* Add optional application level INC callbacks (registered through the CR MPI Ext interface).
* Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive.
* {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked.
* {{{opal-restart}}} also support local decompression before restarting
* {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata
* {{{orte-restart}}} now uses the SStore framework to work with the metadata
* Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality.
* Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}.
* Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped.
* Make sure to decrement the number of 'num_local_procs' in the orted when one goes away.
* odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options.
* Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities.
* Improve the checks for 'already checkpointing' error path.
* A a recovery output timer, to show how long it takes to restart a job
* Do a better job of cleaning up the old session directory on restart.
* Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment)
* Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize.
This commit was SVN r23587.
The following Trac tickets were found above:
Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
