1
1
Граф коммитов

36 Коммитов

Автор SHA1 Сообщение Дата
Josh Hursey
28681deffa Backout the ORCA commit. :(
There is a linking issue on Mac OSX that needs to be addressed before this is able to come back into the trunk.

This commit was SVN r26676.
2012-06-27 01:28:28 +00:00
Josh Hursey
542330e3a7 Commit of ORCA: Open MPI Runtime Collaborative Abstraction
This is a runtime interposition project that sits between the OMPI and ORTE layers in Open MPI.

The project is described on the wiki:
  https://svn.open-mpi.org/trac/ompi/wiki/Runtime_Interposition

And on this email thread:
  http://www.open-mpi.org/community/lists/devel/2012/06/11109.php

This commit was SVN r26670.
2012-06-26 21:42:16 +00:00
Ralph Castain
bd8b4f7f1e Sorry for mid-day commit, but I had promised on the call to do this upon my return.
Roll in the ORTE state machine. Remove last traces of opal_sos. Remove UTK epoch code.

Please see the various emails about the state machine change for details. I'll send something out later with more info on the new arch.

This commit was SVN r26242.
2012-04-06 14:23:13 +00:00
George Bosilca
80c02647c8 Each level (OPAL/ORTE/OMPI) should only return it's own constants,
instead of the current mismatch.

This commit was SVN r25230.
2011-10-04 14:50:31 +00:00
Wesley Bland
4e7ff0bd5e By popular demand the epoch code is now disabled by default.
To enable the epochs and the resilient orte code, use the configure flag:

--enable-resilient-orte

This will define both:

ORTE_ENABLE_EPOCH
ORTE_RESIL_ORTE

This commit was SVN r25093.
2011-08-26 22:16:14 +00:00
Wesley Bland
09274cd047 Make sure that the epoch is initialized everywhere so we don't get weird output
during valgrind. This shouldn't have caused any problems with any actual
execution. Just extra warnings in valgrind.

This commit was SVN r25015.
2011-08-08 15:11:55 +00:00
Abhishek Kulkarni
5501f83fb5 shmem fixes to make the trunk build with C/R flags on.
This commit was SVN r24871.
2011-07-10 23:32:23 +00:00
Wesley Bland
84be81df95 Standardize the initialization of the EPOCH's.
Everyone will be starting at MIN anyway (until we implement restart of course)
so there's no reason to set the epoch to INVALID and then immediately reset them
to MIN. This way there's less room to make mistakes later.

This commit was SVN r24829.
2011-06-28 14:20:33 +00:00
Wesley Bland
e1ba09ad51 Add a resilience to ORTE. Allows the runtime to continue after a process (or
ORTED) failure. Note that more work will be necessary to allow the MPI layer to
take advantage of this.

Per RFC:
http://www.open-mpi.org/community/lists/devel/2011/06/9299.php

This commit was SVN r24815.
2011-06-23 20:38:02 +00:00
Ralph Castain
9ea2b196ce Convert the opal_event framework to use direct function calls instead of hiding functions behind function pointers. Eliminate the opal_object_t abstraction of libevent's event struct so it can be directly passed to the libevent functions.
Note: the ompi_check_libfca.m4 file had to be modified to avoid it stomping on global CPPFLAGS and the like. The file was also relocated to the ompi/config directory as it pertains solely to an ompi-layer component.

Forgive the mid-day configure change, but I know Shiqing is working the windows issues and don't want to cause him unnecessary redo work.

This commit was SVN r23966.
2010-10-28 15:22:46 +00:00
Ralph Castain
86c7365e8e Clean up a few initialization issues - don't think these are impacting the shared memory situation as it didn't fix the problem.
Setup the event API to support multiple bases in preparation for splitting the OMPI and ORTE events. Holding here pending shared memory resolution.

This commit was SVN r23943.
2010-10-26 02:41:42 +00:00
Ralph Castain
fceabb2498 Update libevent to the 2.0 series, currently at 2.0.7rc. We will update to their final release when it becomes available. Currently known errors exist in unused portions of the libevent code. This revision passes the IBM test suite on a Linux machine and on a standalone Mac.
This is a fairly intrusive change, but outside of the moving of opal/event to opal/mca/event, the only changes involved (a) changing all calls to opal_event functions to reflect the new framework instead, and (b) ensuring that all opal_event_t objects are properly constructed since they are now true opal_objects.

Note: Shiqing has just returned from vacation and has not yet had a chance to complete the Windows integration. Thus, this commit almost certainly breaks Windows support on the trunk. However, I want this to have a chance to soak for as long as possible before I become less available a week from today (going to be at a class for 5 days, and thus will only be sparingly available) so we can find and fix any problems.

Biggest change is moving the libevent code from opal/event to a new opal/mca/event framework. This was done to make it much easier to update libevent in the future. New versions can be inserted as a new component and tested in parallel with the current version until validated, then we can remove the earlier version if we so choose. This is a statically built framework ala installdirs, so only one component will build at a time. There is no selection logic - the sole compiled component simply loads its function pointers into the opal_event struct.

I have gone thru the code base and converted all the libevent calls I could find. However, I cannot compile nor test every environment. It is therefore quite likely that errors remain in the system. Please keep an eye open for two things:

1. compile-time errors: these will be obvious as calls to the old functions (e.g., opal_evtimer_new) must be replaced by the new framework APIs (e.g., opal_event.evtimer_new)

2. run-time errors: these will likely show up as segfaults due to missing constructors on opal_event_t objects. It appears that it became a typical practice for people to "init" an opal_event_t by simply using memset to zero it out. This will no longer work - you must either OBJ_NEW or OBJ_CONSTRUCT an opal_event_t. I tried to catch these cases, but may have missed some. Believe me, you'll know when you hit it.

There is also the issue of the new libevent "no recursion" behavior. As I described on a recent email, we will have to discuss this and figure out what, if anything, we need to do.

This commit was SVN r23925.
2010-10-24 18:35:54 +00:00
Josh Hursey
e12ca48cd9 A number of C/R enhancements per RFC below:
http://www.open-mpi.org/community/lists/devel/2010/07/8240.php

Documentation:
  http://osl.iu.edu/research/ft/

Major Changes: 
-------------- 
 * Added C/R-enabled Debugging support. 
   Enabled with the --enable-crdebug flag. See the following website for more information: 
   http://osl.iu.edu/research/ft/crdebug/ 
 * Added Stable Storage (SStore) framework for checkpoint storage 
   * 'central' component does a direct to central storage save 
   * 'stage' component stages checkpoints to central storage while the application continues execution. 
     * 'stage' supports offline compression of checkpoints before moving (sstore_stage_compress) 
     * 'stage' supports local caching of checkpoints to improve automatic recovery (sstore_stage_caching) 
 * Added Compression (compress) framework to support 
 * Add two new ErrMgr recovery policies 
   * {{{crmig}}} C/R Process Migration 
   * {{{autor}}} C/R Automatic Recovery 
 * Added the {{{ompi-migrate}}} command line tool to support the {{{crmig}}} ErrMgr component 
 * Added CR MPI Ext functions (enable them with {{{--enable-mpi-ext=cr}}} configure option) 
   * {{{OMPI_CR_Checkpoint}}} (Fixes trac:2342) 
   * {{{OMPI_CR_Restart}}} 
   * {{{OMPI_CR_Migrate}}} (may need some more work for mapping rules) 
   * {{{OMPI_CR_INC_register_callback}}} (Fixes trac:2192) 
   * {{{OMPI_CR_Quiesce_start}}} 
   * {{{OMPI_CR_Quiesce_checkpoint}}} 
   * {{{OMPI_CR_Quiesce_end}}} 
   * {{{OMPI_CR_self_register_checkpoint_callback}}} 
   * {{{OMPI_CR_self_register_restart_callback}}} 
   * {{{OMPI_CR_self_register_continue_callback}}} 
 * The ErrMgr predicted_fault() interface has been changed to take an opal_list_t of ErrMgr defined types. This will allow us to better support a wider range of fault prediction services in the future. 
 * Add a progress meter to: 
   * FileM rsh (filem_rsh_process_meter) 
   * SnapC full (snapc_full_progress_meter) 
   * SStore stage (sstore_stage_progress_meter) 
 * Added 2 new command line options to ompi-restart 
   * --showme : Display the full command line that would have been exec'ed. 
   * --mpirun_opts : Command line options to pass directly to mpirun. (Fixes trac:2413) 
 * Deprecated some MCA params: 
   * crs_base_snapshot_dir deprecated, use sstore_stage_local_snapshot_dir 
   * snapc_base_global_snapshot_dir deprecated, use sstore_base_global_snapshot_dir 
   * snapc_base_global_shared deprecated, use sstore_stage_global_is_shared 
   * snapc_base_store_in_place deprecated, replaced with different components of SStore 
   * snapc_base_global_snapshot_ref deprecated, use sstore_base_global_snapshot_ref 
   * snapc_base_establish_global_snapshot_dir deprecated, never well supported 
   * snapc_full_skip_filem deprecated, use sstore_stage_skip_filem 

Minor Changes: 
-------------- 
 * Fixes trac:1924 : {{{ompi-restart}}} now recognizes path prefixed checkpoint handles and does the right thing. 
 * Fixes trac:2097 : {{{ompi-info}}} should now report all available CRS components 
 * Fixes trac:2161 : Manual checkpoint movement. A user can 'mv' a checkpoint directory from the original location to another and still restart from it. 
 * Fixes trac:2208 : Honor various TMPDIR varaibles instead of forcing {{{/tmp}}} 
 * Move {{{ompi_cr_continue_like_restart}}} to {{{orte_cr_continue_like_restart}}} to be more flexible in where this should be set. 
 * opal_crs_base_metadata_write* functions have been moved to SStore to support a wider range of metadata handling functionality. 
 * Cleanup the CRS framework and components to work with the SStore framework. 
 * Cleanup the SnapC framework and components to work with the SStore framework (cleans up these code paths considerably). 
 * Add 'quiesce' hook to CRCP for a future enhancement. 
 * We now require a BLCR version that supports {{{cr_request_file()}}} or {{{cr_request_checkpoint()}}} in order to make the code more maintainable. Note that {{{cr_request_file}}} has been deprecated since 0.7.0, so we prefer to use {{{cr_request_checkpoint()}}}. 
 * Add optional application level INC callbacks (registered through the CR MPI Ext interface). 
 * Increase the {{{opal_cr_thread_sleep_wait}}} parameter to 1000 microseconds to make the C/R thread less aggressive. 
 * {{{opal-restart}}} now looks for cache directories before falling back on stable storage when asked. 
 * {{{opal-restart}}} also support local decompression before restarting 
 * {{{orte-checkpoint}}} now uses the SStore framework to work with the metadata 
 * {{{orte-restart}}} now uses the SStore framework to work with the metadata 
 * Remove the {{{orte-restart}}} preload option. This was removed since the user only needs to select the 'stage' component in order to support this functionality. 
 * Since the '-am' parameter is saved in the metadata, {{{ompi-restart}}} no longer hard codes {{{-am ft-enable-cr}}}. 
 * Fix {{{hnp}}} ErrMgr so that if a previous component in the stack has 'fixed' the problem, then it should be skipped. 
 * Make sure to decrement the number of 'num_local_procs' in the orted when one goes away. 
 * odls now checks the SStore framework to see if it needs to load any checkpoint files before launching (to support 'stage'). This separates the SStore logic from the --preload-[binary|files] options. 
 * Add unique IDs to the named pipes established between the orted and the app in SnapC. This is to better support migration and automatic recovery activities. 
 * Improve the checks for 'already checkpointing' error path. 
 * A a recovery output timer, to show how long it takes to restart a job 
 * Do a better job of cleaning up the old session directory on restart. 
 * Add a local module to the autor and crmig ErrMgr components. These small modules prevent the 'orted' component from attempting a local recovery (Which does not work for MPI apps at the moment) 
 * Add a fix for bounding the checkpointable region between MPI_Init and MPI_Finalize. 

This commit was SVN r23587.

The following Trac tickets were found above:
  Ticket 1924 --> https://svn.open-mpi.org/trac/ompi/ticket/1924
  Ticket 2097 --> https://svn.open-mpi.org/trac/ompi/ticket/2097
  Ticket 2161 --> https://svn.open-mpi.org/trac/ompi/ticket/2161
  Ticket 2192 --> https://svn.open-mpi.org/trac/ompi/ticket/2192
  Ticket 2208 --> https://svn.open-mpi.org/trac/ompi/ticket/2208
  Ticket 2342 --> https://svn.open-mpi.org/trac/ompi/ticket/2342
  Ticket 2413 --> https://svn.open-mpi.org/trac/ompi/ticket/2413
2010-08-10 20:51:11 +00:00
Rolf vandeVaart
0324fdb407 Created two new macros that are used when filling in either the
status structure or the _ucount field in the status structure.
On 64-bit sparc, the macros resolve into integer array assignments.
For all others, they are just simple assignments.  This fixes 
possible BUS errors seen when running on the SPARC processor.
This bug was introduced when the _count field changed from an int
into a size_t.  See the changes to request.h for additional details.

This commit fixes trac:2514.

This commit was SVN r23554.

The following Trac tickets were found above:
  Ticket 2514 --> https://svn.open-mpi.org/trac/ompi/ticket/2514
2010-08-04 19:36:40 +00:00
George Bosilca
733d25a8a3 First step toward fixing the MPI_Get_count issues from the ticket #2241. Next
step is the configure and Fortran mojo that Jeff will put in. Until then I
guess the Fortran interface is broken (at least all functions using the hidden
count firld in the MPI_Status).

This commit was SVN r23467.
2010-07-21 20:07:00 +00:00
Jeff Squyres
c8bb7537e7 Remove include/opal/sys/cache.h -- its only purpose in life was to
#define CACHE_LINE_SIZE to 128.  This name has a conflict on NetBSD,
and it seems kinda odd to have a header file that ''only'' defines a
single value.  Also, we'll soon be raising hwloc to be a first-class
item, so having this file around seemed kinda weird.

Therefore, I replaced CACHE_LINE_SIZE with opal_cache_line_size, an
int (in opal/runtime/opal_init.c and opal/runtime/opal.h) on the
rationale that we can fill this in at runtime with hwloc info (trunk
and v1.5/beyond, only).  The only place we ''needed'' a compile-time
CACHE_LINE_SIZE was in the BTL SM (for struct padding), so I made a
new BTL_SM_ preprocessor macro with the old CACHE_LINE_SIZE value
(128).  That use isn't suitable for run-time hwloc information,
anyway.

This commit was SVN r23349.
2010-07-06 14:33:36 +00:00
Josh Hursey
8d9d2ba7d1 Fix the datatype usage in CRCP Bkmrk. as a result of the great datatype shift in r21641
This commit was SVN r21650.

The following SVN revision numbers were found above:
  r21641 --> open-mpi/ompi@6c5532072a
2009-07-13 17:54:26 +00:00
Rainer Keller
6c5532072a - Split the datatype engine into two parts: an MPI specific part in
OMPI
   and a language agnostic part in OPAL. The convertor is completely
   moved into OPAL.  This offers several benefits as described in RFC
   http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
   namely:
    - Fewer basic types (int* and float* types, boolean and wchar
    - Fixing naming scheme to ompi-nomenclature.
    - Usability outside of the ompi-layer.
 - Due to the fixed nature of simple opal types, their information is
   completely
   known at compile time and therefore constified
 - With fewer datatypes (22), the actual sizes of bit-field types may be
   reduced
   from 64 to 32 bits, allowing reorganizing the opal_datatype
   structure, eliminating holes and keeping data required in convertor
   (upon send/recv) in one cacheline...
   This has implications to the convertor-datastructure and other parts
   of the code.
 - Several performance tests have been run, the netpipe latency does not
   change with
   this patch on Linux/x86-64 on the smoky cluster.
 - Extensive tests have been done to verify correctness (no new
   regressions) using:
   1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
    ompi-ddt:
    a. running both trunk and ompi-ddt resulted in no differences
       (except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
       correctly).
    b. with --enable-memchecker and running under valgrind (one buglet
       when run with static found in test-suite, commited)
   2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
      all passed (except for the dynamic/ tests failed!! as trunk/MTT)
   3. compilation and usage of HDF5 tests on Jaguar using PGI and
      PathScale compilers.
   4. compilation and usage on Scicortex.
 - Please note, that for the heterogeneous case, (-m32 compiled
   binaries/ompi), neither
   ompi-trunk, nor ompi-ddt branch would successfully launch.

This commit was SVN r21641.
2009-07-13 04:56:31 +00:00
Greg Koenig
60485ff95f This is a very large change to rename several #define values from
OMPI_* to OPAL_*.  This allows opal layer to be used more independent
from the whole of ompi.

NOTE: 9 "svn mv" operations immediately follow this commit.

This commit was SVN r21180.
2009-05-06 20:11:28 +00:00
Josh Hursey
13a3453e35 more copyright fixes - sorry
This commit was SVN r21129.
2009-04-30 16:41:50 +00:00
Josh Hursey
1f42065950 Make sure the CRCPW wrapper does not try to reference a NULL value in MPI_Finalize(), due to the ordering of pml_finalize and comm_del.
Some of the PML interfaces are noops in BKMRK. Allow the CRCPW to detect and skip the call to these functions.

This commit was SVN r21126.
2009-04-30 16:36:50 +00:00
Rainer Keller
221fb9dbca ... Delayed due to notifier commits earlier this day ...
- Delete unnecessary header files using
   contrib/check_unnecessary_headers.sh after applying
   patches, that include headers, being "lost" due to
   inclusion in one of the now deleted headers...

   In total 817 files are touched.
   In ompi/mpi/c/ header files are moved up into the actual c-file,
   where necessary (these are the only additional #include),
   otherwise it is only deletions of #include (apart from the above
   additions required due to notifier...)

 - To get different MCAs (OpenIB, TM, ALPS), an earlier version was
   successfully compiled (yesterday) on:
   Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
   Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
   Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled

This commit was SVN r21096.
2009-04-29 01:32:14 +00:00
Josh Hursey
aae5d3c825 Switch up the conditional statement, add OPAL_LIKELY.
Thanks to Jeff for the suggestion.

This commit was SVN r21082.
2009-04-27 19:08:05 +00:00
Josh Hursey
2e1fbc4c75 Fix a copy problem when using a drained message that has a NULL buffer. This often happens when draining a Barrier message which are sometimes point-to-point messages with count=0 and a NULL buffer.
This fixes a bug that can happen when checkpointing while one process is in such a routine. Previously a warning was thrown.

This commit was SVN r21080.
2009-04-27 18:39:45 +00:00
Rainer Keller
ec0ed48718 - Revert r20739
This commit was SVN r20742.

The following SVN revision numbers were found above:
  r20739 --> open-mpi/ompi@781caee0b6
2009-03-05 21:56:03 +00:00
Rainer Keller
a94438343b - Revert r20740
This commit was SVN r20741.

The following SVN revision numbers were found above:
  r20740 --> open-mpi/ompi@2a70618a77
2009-03-05 21:50:47 +00:00
Rainer Keller
2a70618a77 - Second patch, as discussed in Louisville.
Replace short macros in orte/util/name_fns.h
   to the actual fct. call.

 - Compiles on linux/x86-64

This commit was SVN r20740.
2009-03-05 21:14:18 +00:00
Rainer Keller
781caee0b6 - First of two or three patches, in orte/util/proc_info.h:
Adapt orte_process_info to orte_proc_info, and
   change orte_proc_info() to orte_proc_info_init().
 - Compiled on linux-x86-64
 - Discussed with Ralph

This commit was SVN r20739.
2009-03-05 20:36:44 +00:00
Josh Hursey
b62bc63f76 Fix some compiler warnings. I was using the ompi_predefined_* types instead of the base classes.
This commit was SVN r20722.
2009-03-04 16:16:13 +00:00
Josh Hursey
e46c512ee7 Fix a couple of missing headers resulting from recent cleanup
This commit was SVN r20643.
2009-02-26 16:56:56 +00:00
Josh Hursey
c954045989 Add a patch to address a deadlock in the CRCP BKMRK component.
The problem was that we doubly decremented the active count on blocking receives that we stall to complete. This moved the active count into the negative. With a negative count for 'active' a message that should have been accounted for would be over looked. This then causes the bookmark exchange to post a drain for a message that was never posted, thus locking the protocol. By eliminating the decrement on the 'active' count when we attempt to post the drain message, we only the decrement this counter when the outstanding blocking recv completes during the stall operation.

Refs trac:1619
Does not close this ticket since there is an outstanding potential problem with ANY_SOURCE and ANY_TAG, as referenced in the ticket.

This should be moved to v1.3

This commit was SVN r20147.

The following Trac tickets were found above:
  Ticket 1619 --> https://svn.open-mpi.org/trac/ompi/ticket/1619
2008-12-17 17:23:39 +00:00
Josh Hursey
460e84f174 A fix for the intel "MPI_Send_init_ator_c" test.
It highlighted a bug in the bookmark component where for persistent sends we were not copying the context, but just moving it. This caused us to lose track of the message if it is started/completed multiple times.

This will need to be brought over to the v1.3 branch, but it should soak overnight to get a round of testing first.

This commit was SVN r19962.
2008-11-10 16:55:58 +00:00
Josh Hursey
88aa45dd52 Commit to bring online OpenIB, MX, and shared memory support for Open MPI's checkpoint/restart functionality. Some tuning is still needed, but basic functionality is in place.
There is still a problem with OpenIB and threads (external to C/R functionality). It has been reported in Ticket #1539

Additionally:
* Fix a file cleanup bug in CRS Base.
* Fix a possible deadlock in the TCP ft_event function
* Add a mca_base_param_deregister() function to MCA base
* Add whole process checkpoint timers
* Add support for BTL: OpenIB, MX,  Shared Memory
* Add support Mpool: rdma, sm
* Sundry bounds checking an cleanup in some scattered functions

This commit was SVN r19756.
2008-10-16 15:09:00 +00:00
Josh Hursey
6e34994ee1 Fix a problem with persistent sends found in MTT regression testing on Odin.
This commit was SVN r19707.
2008-10-08 14:11:55 +00:00
Josh Hursey
b7560c52be Make sure to check the bounds of the communicator array before referencing it. Fixes some of the FT related Intel bugs seen in Odin testing last night.
This commit was SVN r19701.
2008-10-07 19:15:12 +00:00
Josh Hursey
36185ad964 Replace the old coordinated component ('coord') and replace it with a much more refined version ('bkmrk').
The new component fixes a number of problems with the old component. The core algorithm is the same, but by changing the data strucutres a bit we have improved performance and memory utilization.

There are still a couple corner cases that still need some work. However, I did not want to delay bringing this into the trunk (and v1.3 branch) for too much longer.

This commit was SVN r19537.
2008-09-10 18:29:17 +00:00