It is possible to get into a situation where a small accumulate operation
can not be completed because a large accumulate operation holds the lock.
In this case we may return from wait/flush/etc before the operation is
complete. To handle this case increment the expected incoming fragment
count when queuing an accumulate operation and increment the incoming
fragment count after processing the accumulate operation.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31224.
This commit fixes two issues:
- osc/rdma: The target side of an accumulate was using the target datatype
in the receive to the packed buffer. This was conflicting with the way
the reduction is done into the target buffer. Changed the receive to use
the primitive datatype.
- osc/base: The copy table was completely wrong. Fixed the table to match
the underlying datatypes (which are opal not ompi datatypes).
- osc/base: There is a problem using the optimized description. Fall back
on using the non-optimized description until we can understand what is
going wrong.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31204.
results
The code to handle completion messages did not correctly increment the
number of expected messages. This could cause wait to return before all
incoming messages are complete.
I also added a check to ensure that start returns an error if we are in
a passive access epoch.
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31203.
This commit adds large datatype description support to the osc/rdma
component. Support is provided by an additional send/recv of the datatype
description if the description does not fit in an eager buffer. The
code is designed to require minimal new code and not for speed. We
consider this code path to be a slow path.
Refs trac:1905
cmr=v1.8:reviewer=jsquyres
This commit was SVN r31197.
The following Trac tickets were found above:
Ticket 1905 --> https://svn.open-mpi.org/trac/ompi/ticket/1905
This fixes a bug in r31029 which removes the use of the pml base request
(also not a good way since cm doesn't use the base request). We now allocate
a data structure (ugh) to determine the needed information. Tested with
mtt/onesided.
cmr=v1.7.5:ticket=trac:4379
This commit was SVN r31044.
The following SVN revision numbers were found above:
r31029 --> open-mpi/ompi@29e00f9161
The following Trac tickets were found above:
Ticket 4379 --> https://svn.open-mpi.org/trac/ompi/ticket/4379
It seems we can't release accumulate buffers in completion callbacks
because the btls don't release registration resources until after the
callback has fired. The fix is to keep track of the unused buffers and
free them later. This should resolve issues when running IMB-EXT and
IMB-RMA.
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r31029.
The datatype unpacking code assumes that the packed datatype buffer has the
same alignment as an OPAL_PTRDIFF_TYPE. This was not enforced by the rdma
one-sided component. I changed the ordering and sized of various osc/rdma
headers to ensure their sizes are a multiple of 8-bytes and modified the
fragment allocation call to ensure all headers are 8-byte aligned. While
not the cleanest way to handle this situation it should resolve the issue.
Fixes trac:4315
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r30974.
The following Trac tickets were found above:
Ticket 4315 --> https://svn.open-mpi.org/trac/ompi/ticket/4315
assumes the send request is derived from mca_pml_base_send_request_t,
but this is not true for pml cm, so we end up freeing invalid pointer.
We cannot take the data pointer from the pml send request, so we pass
the allocated buffer pointer in req_complete_cb_data, and put the
osc_rdma_module pointer in that buffer as well.
Previously, osc_pt2pt was used with pml_cm which didn't have this
problem.
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30967.
configure-time dynamic allocation of flags. The net result for platforms
which only support BTL-based communication is a reduction of 8*nprocs bytes
per process. Platforms which support both MTLs and BTLs will not see
a space reduction, but will now be able to safely run both the MTL and BTL
side-by-side, which will prove useful.
This commit was SVN r29100.
osc_pt2pt_data_move.c: In function 'ompi_osc_pt2pt_sendreq_recv_accum_long_cb':
osc_pt2pt_data_move.c:643:9: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
osc_rdma_data_move.c: In function 'ompi_osc_rdma_control_send_cb':
osc_rdma_data_move.c:1312:37: warning: variable 'header' set but not used [-Wunused-but-set-variable]
This commit was SVN r29092.
Notes:
- This commit also eliminates the need for an available components list in use
in several frameworks. None of the code in question was making use of the
priority field of the priority component list item so these extra lists were
removed.
- Cleaned up selection code in several frameworks to sort lists using opal_list_sort.
- Cleans up the ompi/orte-info functions. Expose the functions that construct the
list of params so they can be used elsewhere.
patches for mtl/portals4 from brian
missed a few output variables in openib
This commit was SVN r28241.
request completion callback
* Use the completion callback pointer to remove all need for opal_progress
calls in the one-sided layer
This commit was SVN r24848.
No need for any CMRs to 1.5... that was already done in CMR 2728.
This commit was SVN r24545.
The following SVN revision numbers were found above:
r22841 --> open-mpi/ompi@b400b84162
update the remain_len field for the buffer.
This really fixes ticket #2532.
This commit was SVN r23706.
The following SVN revision numbers were found above:
r23649 --> open-mpi/ompi@f42c2a737f
OMPI
and a language agnostic part in OPAL. The convertor is completely
moved into OPAL. This offers several benefits as described in RFC
http://www.open-mpi.org/community/lists/devel/2009/07/6387.php
namely:
- Fewer basic types (int* and float* types, boolean and wchar
- Fixing naming scheme to ompi-nomenclature.
- Usability outside of the ompi-layer.
- Due to the fixed nature of simple opal types, their information is
completely
known at compile time and therefore constified
- With fewer datatypes (22), the actual sizes of bit-field types may be
reduced
from 64 to 32 bits, allowing reorganizing the opal_datatype
structure, eliminating holes and keeping data required in convertor
(upon send/recv) in one cacheline...
This has implications to the convertor-datastructure and other parts
of the code.
- Several performance tests have been run, the netpipe latency does not
change with
this patch on Linux/x86-64 on the smoky cluster.
- Extensive tests have been done to verify correctness (no new
regressions) using:
1. mpi_test_suite on linux/x86-64 using clean ompi-trunk and
ompi-ddt:
a. running both trunk and ompi-ddt resulted in no differences
(except for MPI_SHORT_INT and MPI_TYPE_MIX_LB_UB do now run
correctly).
b. with --enable-memchecker and running under valgrind (one buglet
when run with static found in test-suite, commited)
2. ibm testsuite on linux/x86-64 using clean ompi-trunk and ompi-ddt:
all passed (except for the dynamic/ tests failed!! as trunk/MTT)
3. compilation and usage of HDF5 tests on Jaguar using PGI and
PathScale compilers.
4. compilation and usage on Scicortex.
- Please note, that for the heterogeneous case, (-m32 compiled
binaries/ompi), neither
ompi-trunk, nor ompi-ddt branch would successfully launch.
This commit was SVN r21641.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
to happen
* Properly error out (rather than cause buffer overflow) in case where
the datatype packed description is larger than our control fragments.
This still isn't standards conforming, but at least we know what
happened.
* Expose win_set_name to external libraries (like the osc modules)
* Set default window name to the CID of the communcator it's using
for communication
Refs trac:1905
This commit was SVN r21134.
The following Trac tickets were found above:
Ticket 1905 --> https://svn.open-mpi.org/trac/ompi/ticket/1905
Anyway, this is blocking the move: do not include pml.h
if not really needed, aka none of the following used:
mca_pml
MCA_PML_CALL
OMPI_ANY_TAG
OMPI_ANY_SOURCE
OMPI_PROC_NULL
- Notable exceptions (deleting in one header->adding):
- ompi/mca/mtl/psm/
- ompi/mca/osc/rdma/
- ompi/mca/btl/openib/btl_openib_endpoint.c depended on
pml_base_sendreq.h
- Tested on Linux/x86-64, this time including make check
(thanks Jeff and Ralph)
This commit was SVN r20725.
Often, orte/util/show_help.h is included, although no functionality
is required -- instead, most often opal_output.h, or
orte/mca/rml/rml_types.h
Please see orte_show_help_replacement.sh commited next.
- Local compilation (Linux/x86_64) w/ -Wimplicit-function-declaration
actually showed two *missing* #include "orte/util/show_help.h"
in orte/mca/odls/base/odls_base_default_fns.c and
in orte/tools/orte-top/orte-top.c
Manually added these.
Let's have MTT the last word.
This commit was SVN r20557.
* If the accumulate is local, make it short-circuit the request path. Accumulate requires local
ops due to its window rules, so this is likely to help a bunch (on the codes I"m messing
with at least)
* Due a better job at flushing everything that can go out on the wire in a resource constrained problem
* Move some debugging values around to make large problems somewhat easier to deal with
This commit was SVN r20277.
* Don't overwrite the des_flags field, removing the
all important always callback field
* Fix up return status of bml_base_send, since
the rest of the code expects OMPI_SUCCESS or
an error code
This commit was SVN r20178.
got a whole lot smaller, decreasing the memory footprint of the
running application. How much it's a good question. Here is a
breakdown:
- in mca_bml_base_endpoint_t: 3 *size_t + 1 * uint32_t
- in mca_bml_base_btl_t: 1 * int + 1 * double - 1 * float
+ 6 * size_t + 9 * (void*)
The decrease in mca_bml_base_endpoint_t is for each peer and the
decrease in mca_bml_base_btl_t is for each BTL for each peer.
So, if we consider the most convenient case where there is only
one network between all peers, this decrease the memory foot print
per peer by
9*size_t + 9*(void*) + 2 * int32_t + 1 * double - 1 * float.
On a 64 bits machine this will be 156 bytes per peer.
Now we access all these fields directly from the underlying BTL
structure, and as this structure is common to multiple BML endpoint,
we are a lot more cache friendly. Even if this do not improve the
latency, it makes the SM performance graph a lot smoother.
This commit was SVN r19659.
After much work by Jeff and myself, and quite a lot of discussion, it has become clear that we simply cannot resolve the infinite loops caused by RML-involved subsystems calling orte_output. The original rationale for the change to orte_output has also been reduced by shifting the output of XML-formatted vs human readable messages to an alternative approach.
I have globally replaced the orte_output/ORTE_OUTPUT calls in the code base, as well as the corresponding .h file name. I have test compiled and run this on the various environments within my reach, so hopefully this will prove minimally disruptive.
This commit was SVN r18619.
1. The send path get shorter. The BTL is allowed to return > 0 to specify that the
descriptor was pushed to the networks, and that the memory attached to it is
available again for the upper layer. The MCA_BTL_DES_SEND_ALWAYS_CALLBACK flag
can be used by the PML to force the BTL to always trigger the callback.
Unmodified BTL will continue to work as expected, as they will return OMPI_SUCCESS
which force the PML to have exactly the same behavior as before. Some BTLs have
been modified: self, sm, tcp, mx.
2. Add send immediate interface to BTL.
The idea is to have a mechanism of allowing the BTL to take advantage of
send optimizations such as the ability to deliver data "inline". Some
network APIs such as Portals allow data to be sent using a "thin" event
without packing data into a memory descriptor. This interface change
allows the BTL to use such capabilities and allows for other optimizations
in the future. All existing BTLs except for Portals and sm have this interface
set to NULL.
This commit was SVN r18551.
such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
