Remove the opal_ignore from the RML/OFI component, but disable that component unless the user specifically requests it via the "rml_ofi_desired=1" MCA param. This will let us test compile in various environments without interfering with operations while we continue to debug
Fix an error when computing the number of infos during server init
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Start updating the various mappers to the new procedure. Remove the stale lama component as it is now very out-of-date. Bring round_robin and PPR online, and modify the mindist component (but cannot test/debug it).
Remove unneeded test
Fix memory corruption by re-initializing variable to NULL in loop
Resolve the race condition identified by @ggouaillardet by resetting the
mapped flag within the same event where it was set. There is no need to
retain the flag beyond that point as it isn't used again.
Add a new job attribute ORTE_JOB_FULLY_DESCRIBED to indicate that all the job information (including locations and binding) is included in the launch message. Thus, the backend daemons do not need to do any map computation for the job. Use this for the seq, rankfile, and mindist mappers until someone decides to update them.
Note that this will maintain functionality, but means that users of those three mappers will see large launch messages and less performant scaling than those using the other mappers.
Have the mindist module add procs to the job's proc array as it is a fully described module
Protect the hnp-not-in-allocation case
Per path suggested by Gilles - protect the HNP node when it gets added in the absence of any other allocation or hostfile
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
On unmanaged allocations, we need to update the total_slots_allocated once the daemons have been launched and "discovered" their topology
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Do not pass param file MCA params if the user has requested that no param files be read - required when trying to avoid launch time penalties from large numbers of processes reading default param files. The daemon picks them up and passes them along anyway, so it isn't clear what value we gain from having them all read the defaults
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Set the daemons' state to "running" and mark them as "alive" by default when constructing the nidmap
Get the DVM running again
Fix direct modex by eliminating race condition caused by releasing data while sending it
Up the size limit before compressing
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
onto the backend daemons. By default, let mpirun only pack the app_context
info and send that to the backend daemons where the mapping will
be done. This significantly reduces the computational time on mpirun as it isn't
running up/down the topology tree computing thousands of binding
locations, and it reduces the launch message to a very small number of
bytes.
When running -novm, fall back to the old way of doing things
where mpirun computes the entire map and binding, and then sends
the full info to the backend daemon.
Add a new cmd line option/mca param --fwd-mpirun-port that allows
mpirun to dynamically select a port, but then passes that back to
all the other daemons so they will use that port as a static port
for their own wireup. In this mode, we no longer "phone home" directly
to mpirun, but instead use the static port to wireup at daemon
start. We then use the routing tree to rollup the initial
launch report, and limit the number of open sockets on mpirun's node.
Update ras simulator to track the new nidmap code
Cleanup some bugs in the nidmap regex code, and enhance the error message for not enough slots to include the host on which the problem is found.
Update gadget platform file
Initialize the range count when starting a new range
Fix the no-np case in managed allocation
Ensure DVM node usage gets cleaned up after each job
Update scaling.pl script to use --fwd-mpirun-port. Pre-connect the daemon to its parent during launch while we are otherwise waiting for the daemon's children to send their "phone home" rollup messages
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Per a prior commit, the presence of "hwloc.h" can cause ambiguity when
using --with-hwloc=external (i.e., whether to include
opal/mca/hwloc/hwloc.h or whether to include the system-installed
hwloc.h).
This commit:
1. Renames opal/mca/hwloc/hwloc.h to hwloc-internal.h.
2. Adds opal/mca/hwloc/autogen.options to tell autogen.pl to expect to
find hwloc-internal.h (instead of hwloc.h) in opal/mca/hwloc.
3. s@opal/mca/hwloc/hwloc.h@opal/mca/hwloc/hwloc-internal.h@g in the
rest of the code base.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
direct. Don't resend wireup info if nothing has changed
Fix release of buffer
Correct the unpacking order
Fix the DVM - now minimized data transfer to it
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Fix static port wireup by recording the TCP port mpirun is using and correctly passing the regex of hosts to the daemons. Do a better job of closing sockets on failed connection attempts. Correctly identify the remote host in the associated error message.
Fix partial allocation operations by not attempting to set #slots on nodes that were not used, and thus don't have a daemon or topology assigned to them
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Given that we only set OOB contact info from inside of events, or before we begin threaded operations (e.g., in the ess), allow set_contact_info to directly update the oob/base framework globals.
Correct the nidmap regex decompression routine.
Ensure that rank=1 daemon always sends back its topology as this is the most common use-case.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
* Similar to `orte_map_stddiag_to_stderr` except it redirects `stddiag`
to `stdout` instead of `stderr`.
* Add protection so that the user canot supply both:
- `orte_map_stddiag_to_stderr`
- `orte_map_stddiag_to_stdout`
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
Cleanup a typo, and remove no longer needed MCA params for hetero nodes and hetero apps. Hetero nodes will always be automatically detected. We don't support a mix of 32 and 64 bit apps
Modify the orte_node_t to use orte_topology_t instead of hwloc_topology_t, updating all the places that use it. Ensure that we properly update topology when we see a different one on a compute node.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Revamp the event notification integration to rely on the PMIx event chaining and remove the duplicate chaining in OPAL. This ensures we get system-level events that target non-default handlers.
Restore the hostname entries for MPI-level error messages, but provide an MCA param (orte_hostname_cutoff) to remove them for large clusters where the memory footprint is problematic. Set the default at 1000 nodes in the job (not the allocation).
Begin first cut at memory profiler
Some minor cleanups of memprobe
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Still not completely done as we need a better way of tracking the routed module being used down in the OOB - e.g., when a peer drops connection, we want to remove that route from all conduits that (a) use the OOB and (b) are routed, but we don't want to remove it from an OFI conduit.
* Expand the use of the `orte_keep_fqdn_hostnames` MCA parameter when
it is set to false.
* If that parameter is set to false (default) then short hostnames
(e.g., `node01`) will match with the long hostnames (e.g.,
`node01.mycluster.org`). This allows a user (or resource manager)
to mix the use of short and long hostnames.
- Note that this mechanism does _not_ perform a DNS lookup, but
instead strips off the FQDN by truncating the hostname string at
the first `.` character (when not an IP address).
- By default (`false`) the following is true:
`node01 == node01.mycluster.org == node01.bogus.com`
since we use `node01` as the hostname.
Note that this cannot be used for MPI performance testing. It is really only useful for ORTE scaling tests. It also only works with the rsh/ssh launcher.
Ensure the returned exit status is non-zero if we fail to map
If no -np is given, but either -host and/or -hostfile was given, then error out with a message telling the user that this combination is not supported.
If -np is given, and -host is given with only one instance of each host, then default the #slots to the detected #pe's and enforce oversubscription rules.
If -np is given, and -host is given with more than one instance of a given host, then set the #slots for that host to the number of times it was given and enforce oversubscription rules. Alternatively, the #slots can be specified via "-host foo:N". I therefore believe that row #7 on Jeff's spreadsheet is incorrect.
With that one correction, this now passes all the given use-cases on that spreadsheet.
Make things behave under unmanaged allocations more like their managed cousins - if the #slots is given, then no-np shall fill things up.
Fixes#1344
* Clean up the DVM so it continues to run even when applications error out and we would ordinarily abort the daemons.
* Create a new errmgr component for the DVM to handle the differences.
* Cleanup the DVM state component.
* Add ORTE bindings directory and brief README
* Pass a local tool index around to match jobs.
* Pass the jobid on job completion.
* Fix initialization logic.
* Add framework for python wrapper.
* Fix terminate-with-non-zero-exit behavior so it properly terminates only the indicated procs, notifies orte-submit, and orte-dvm continues executing.
* Add some missing options to orte-dvm
* Fix a bug in -host processing that caused us to ignore the #slots designator. Add a new attribute to indicate "do not expand the DVM" when submitting job spawn requests.
* It actually makes no sense that we treat the termination of all children differently than terminating the children of a specific job - it only creates confusion over the difference in behavior. So terminate children the same way regardless.
Extend the cmd_line utility to easily allow layering of command line definitions
Catch up with ORTE interface change and make build more generic.
Disable "fixed dvm" logic for now.
Add another cmd_line function to merge a table of cmd line options with another one, reporting as errors any duplicate entries. Use this to allow orterun to reuse the orted_submit code
Fix the "fixed_dvm" logic by ensuring we reset num_new_daemons to zero. Also ensure that the nidmap is sent with the first job so the downstream daemons get the node info. Remove a duplicate cmd line entry in orterun.
Revise the DVM startup procedure to pass the nidmap only once, at the startup of the DVM. This reduces the overhead on each job launch and ensures that the nidmap doesn't get overwritten.
Add new commands to get_orted_comm_cmd_str().
Move ORTE command line options to orte_globals.[ch].
Catch up with extra orte_submit_init parameter.
Add example code.
Add documentation.
Bump version.
The nidmap and routing data must be updated prior to propagating the xcast or else the xcast will fail.
Fix the return code so it is something more expected when an error occurs. Ensure we get an error returned to us when we fail to launch for some reason. In this case, we will always get a launch_cb as we did indeed attempt to spawn it. The error code will be returned in the complete_cb.
Fix the return code from orte_submit_job - it was returning the tracker index instead of "success". Take advantage of ORTE's pretty-print capabilities to provide a nice error output explaining why we failed to launch. Ensure we always get a launch_cb when we fail to launch, but no complete_cb as the job never launched.
Extend the error reporting capability to job completion as well.
Add index parameter to orte_submit_job().
Add orte_job_cancel and implement ORTE_DAEMON_TERMINATE_JOB_CMD.
Factor out dvm termination.
Parse the terminate option at tool level.
Add error string for ORTE_ERR_JOB_CANCELLED.
Add some safeguards.
Cleanup and/of comments.
Enable the return.
Properly ORTE_DECLSPEC orte_submit_halt.
Add orte_submit_halt and orte_submit_cancel to interface.
Use the plm interface to terminate the job
The mca_base_select function uses returned priorities to select the
best component/module. This priority may be of use to the caller so
pass that information back in an optional argument. If the priority is
not needed pass NULL.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
