This code is the implementation of Software-base Performance Counters as described in the paper 'Using Software-Base Performance Counters to Expose Low-Level Open MPI Performance Information' in EuroMPI/USA '17 (http://icl.cs.utk.edu/news_pub/submissions/software-performance-counters.pdf). More practical usage information can be found here: https://github.com/davideberius/ompi/wiki/How-to-Use-Software-Based-Performance-Counters-(SPCs)-in-Open-MPI.
All software events functions are put in macros that become no-ops when SOFTWARE_EVENTS_ENABLE is not defined. The internal timer units have been changed to cycles to avoid division operations which was a large source of overhead as discussed in the paper. Added a --with-spc configure option to enable SPCs in the Open MPI build. This defines SOFTWARE_EVENTS_ENABLE. Added an MCA parameter, mpi_spc_enable, for turning on specific counters. Added an MCA parameter, mpi_spc_dump_enabled, for turning on and off dumping SPC counters in MPI_Finalize. Added an SPC test and example.
Signed-off-by: David Eberius <deberius@vols.utk.edu>
FI_MR_UNSPEC is not supposed to be used beyond ofi version 1.5. This
commit replaces FI_MR_UNSPEC with the new FI_MR_BASIC mode bits
(FI_MR_PROV_KEY | FI_MR_ALLOCATED | FI_MR_VIRT_ADDR).
The btl functionality remains the same.
Signed-off-by: Thananon Patinyasakdikul <thananon.patinyasakdikul@intel.com>
The `nbc_i*` functions don't start communication, but create a request.
`nbc_*_init` are appropriate names for them.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
Persistent operation for `NBC_A2A_DISS` is not supported currently.
Though the algorithm is not selected at all currently, I put an
assertion not to select it by mistake.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
`NBC_Copy` shoud not be called in `MPI_*_INIT`.
`NBC_Sched_copy` should be called instead.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
Because a persistent reuqest does not free its `schedule` object
when the communication completes, the `NBC_Progress` function cannot
determine the completion using `schedule`.
Without this change, a hang occurs when the `NBC_Progress` function
is called recursively through the `NBC_Start_round` function.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
Until the MPI Forum decides to add the persistent collective
communication request feature to the MPI Standard, these functions
are supported through MPI extensions with the `MPIX_` prefix.
Only C bindings are supported currently.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
Now libnbc COLL supports persistent collectives and all `*_init`
functions of the COLL interface are available. So let's enable the
check of availability of those functions on a communicator creation.
Signed-off-by: KAWASHIMA Takahiro <t-kawashima@jp.fujitsu.com>
prepare the upcoming persistent collectives by pre-factoring some code
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
fixup 808c3c62cd9475edd91ecde9d2d53b12e28b2c04
now that we have a shiny new fcoll component, no need
to keep the static component around. No use for it anymore.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
check for pending I/O operations and invalid modes
and return proper error codes before executing MPI_File_sync
makes the e_sync_1 test from the ibm testsuite pass.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
the interface if file_get_type_extent did not check
whether the input datatype is valid or not.
Makes the e_get_type_extend_2 test from the ibm testsuite pass.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
in case the user opened a file using the DELETE_ON_CLOSE flag,
return the error code generated in the delete operation.
Note, that this is however just a partial fix to the e_close_1 test
from the ibm testsuite, since the object destructor that triggers
the file_close function does not have a mechanism right now to recognize
and return an error code.
Signed-off-by: Edgar Gabriel <gabriel@cs.uh.edu>
in file_get_byte_offset, return an error code if the offset
leads to an invalid position in file.
Makes the e_get_byte_offset_1 test from the ibm testsuite pass.
Signed-off-by: Edgar Gabriel <gabriel@cs.uh.edu>
and some internal structure elements/components. Along the way,
add support for the cb_nodes Info object.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
since the request code is now being accessed also from the vulcan fcoll
component, the request code was relocated into the common/ompio
directory to avoid ld load problems.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
We introduced a new mca_vulcan parameter that specify the I/O synchronization
type (Async/sync I/O) applied within the collective write operation.
The user can explicitly choose to use async or sync write operation or make
the choice automatically made.
Signed-off-by: raafatfeki <fekiraafat@gmail.com>
For very large offsets, the data chunk size to be written by each aggregator
exceeds the capacity of an integer variable. Besides, some variables were
not large enough to hold intermediate values.
Signed-off-by: raafatfeki <fekiraafat@gmail.com>
Identify the index of each aggregator process in order to restrict the call to write_init function by the specific aggregator.
Signed-off-by: raafatfeki <fekiraafat@gmail.com>
Instead of using a temporary buffer and copy data into the temp buffer before sending, use a derived datatype to describe the data that needs to be sent during a cycle in the collective I/O operation.
Signed-off-by: raafatfeki <fekiraafat@gmail.com>
import of the new vulcan component. It is an enhanced version
of the two_phase component, which uses however the ompio internal
codes/loops to assemble the data arrays. It is therefore more inline
with the dynamic and dynamic_gen2 component, and will be easier to
maintain.
Signed-off-by: Edgar Gabriel <egabriel@central.uh.edu>
If a subroutine of the Fortran `use-mpi-f08` binding in an MPI extension
have a `LOGICAL` parameter and no `TYPE(MPI_Status)` parameter,
it needs to use the `mpi_ext` module and call its corresponding subroutine
in the `mpif-h` directory, as explained in
`ompi/mpi/fortran/use-mpi-f08/mpi-f-interfaces-bind.h`.
However, as shown in the figure below, the required directories are dependent
on each other, and "Can't open module file" error occurs at build time.
ompi/mpiext/{extension name}/use-mpi-f08
A |
| |
| V
ompi/mpi/fortran/use-mpi-f08 <--- ompi/mpi/fortran/mpiext (mpi_ext.mod)
In order to solve this problem, change the configuration and the build order.
- divide Fortran extension directory (`ompi/mpi/fortran/mpiext`)
into the directories for `use-mpi` and for `use-mpi-08`
- `ompi/mpi/fortran/mpiext-use-mpi` : for `use-mpi` (mpi_ext.mod)
- `ompi/mpi/fortran/mpiext-use-mpi-f08` : for `use-mpi-08` (mpi_f08_ext.mod)
- change to the following build order about Fortran `use-mpi` and
`use-mpi-f08` bindings in `ompi`
1. mpi_ext bindings of MPI extensions (`mpiext/{extension name}/use-mpi` directory)
2. Fortran use-mpi (`mpi/fortran/use-mpi-[ignore-]tkr` directory)
3. Fortran extension for use-mpi (`mpi/fortran/mpiext-use-mpi` directory)
4. Fortran use-mpi-f08 modules only (`mpi/fortran/use-mpi-f08/mod` directory)
5. mpi_f08_ext bindings of MPI extensions (`mpiext/{extension name}/use-mpi-f08` directory)
6. Fortran use-mpi-f08 (`mpi/fortran/use-mpi-f08` directory)
7. Fortran extension for use-mpi-f08 (`mpi/fortran/mpiext-use-mpi-f08` directory)
Signed-off-by: Kurita, Takehiro <fj6370fp@aa.jp.fujitsu.com>
