Start updating the various mappers to the new procedure. Remove the stale lama component as it is now very out-of-date. Bring round_robin and PPR online, and modify the mindist component (but cannot test/debug it).
Remove unneeded test
Fix memory corruption by re-initializing variable to NULL in loop
Resolve the race condition identified by @ggouaillardet by resetting the
mapped flag within the same event where it was set. There is no need to
retain the flag beyond that point as it isn't used again.
Add a new job attribute ORTE_JOB_FULLY_DESCRIBED to indicate that all the job information (including locations and binding) is included in the launch message. Thus, the backend daemons do not need to do any map computation for the job. Use this for the seq, rankfile, and mindist mappers until someone decides to update them.
Note that this will maintain functionality, but means that users of those three mappers will see large launch messages and less performant scaling than those using the other mappers.
Have the mindist module add procs to the job's proc array as it is a fully described module
Protect the hnp-not-in-allocation case
Per path suggested by Gilles - protect the HNP node when it gets added in the absence of any other allocation or hostfile
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
This commit recategorizes several mpirun arguments,
and moves the information for mpirun --help arguments
to the bottom of the general help message. I also
added the OPAL_CMD_LINE_OTYPE field to two commands
that were missed initially because they were not
in the same area as the others.
Signed-off-by: Nathaniel Graham <ngraham@lanl.gov>
The fact that application proc called Abort (read failed) doesn't
mean that ORTE subsystem has failed - vice versa it does it's work
to gracefuly exit the whole application.
orted exiting with non-zero status creates a problem for at least
plm/slurm environments where orteds are launched via `srun` with
"--kill-on-bad-exit" flag. If one of orteds has exited with non-
zero status slurm will immediately kill all other orteds. As the
result we see a lot of leftover in the `/tmp` directory.
Signed-off-by: Artem Polyakov <artpol84@gmail.com>
Output a (hopefully) helpful message when we timeout an operation
Thanks to Nathan for tracking it down.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
This commit modifies the output from the mpirun --help
command. The options have been split into groups, to
make the output smaller and more readable. The groups
are: general, debug, output, input, mapping, ranking,
binding, devel, compatibility, launch, dvm, and
unsupported. There is also a special "full" command
that can be used to get the old behaviour of printing
out all of the options. Unsupported options may only
be seen with this full output.
This commit also adds a special case for the help
argument. It makes it possible for the user to
enter 0 or 1 arguments instead of having to always
enter an argument. This defaults to printing out
the "general" help options so the user can then
see what help arguments there are.
Signed-off-by: Nathaniel Graham <ngraham@lanl.gov>
Two updates:
1. Remove the "run as root" error message from orterun.c, because that
functionality is now in orted_submit.c (although it is still
required in orte-dvm.c -- so sync the message in orted_submit.c and
orte-dvm.c to be identical).
2. Slightly tweak the text of the "run as root" error message to
explicitly state that we (strongly) suggest running as a non-root
user (and add a little whitespace).
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
onto the backend daemons. By default, let mpirun only pack the app_context
info and send that to the backend daemons where the mapping will
be done. This significantly reduces the computational time on mpirun as it isn't
running up/down the topology tree computing thousands of binding
locations, and it reduces the launch message to a very small number of
bytes.
When running -novm, fall back to the old way of doing things
where mpirun computes the entire map and binding, and then sends
the full info to the backend daemon.
Add a new cmd line option/mca param --fwd-mpirun-port that allows
mpirun to dynamically select a port, but then passes that back to
all the other daemons so they will use that port as a static port
for their own wireup. In this mode, we no longer "phone home" directly
to mpirun, but instead use the static port to wireup at daemon
start. We then use the routing tree to rollup the initial
launch report, and limit the number of open sockets on mpirun's node.
Update ras simulator to track the new nidmap code
Cleanup some bugs in the nidmap regex code, and enhance the error message for not enough slots to include the host on which the problem is found.
Update gadget platform file
Initialize the range count when starting a new range
Fix the no-np case in managed allocation
Ensure DVM node usage gets cleaned up after each job
Update scaling.pl script to use --fwd-mpirun-port. Pre-connect the daemon to its parent during launch while we are otherwise waiting for the daemon's children to send their "phone home" rollup messages
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Per a prior commit, the presence of "hwloc.h" can cause ambiguity when
using --with-hwloc=external (i.e., whether to include
opal/mca/hwloc/hwloc.h or whether to include the system-installed
hwloc.h).
This commit:
1. Renames opal/mca/hwloc/hwloc.h to hwloc-internal.h.
2. Adds opal/mca/hwloc/autogen.options to tell autogen.pl to expect to
find hwloc-internal.h (instead of hwloc.h) in opal/mca/hwloc.
3. s@opal/mca/hwloc/hwloc.h@opal/mca/hwloc/hwloc-internal.h@g in the
rest of the code base.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Register namespace even if there is no node-local processes that
belongs to it. We need this for the MPI_Spawn case.
Addressing https://github.com/open-mpi/ompi/issues/2920.
Was introduced in be3ef77739.
Signed-off-by: Artem Polyakov <artpol84@gmail.com>
direct. Don't resend wireup info if nothing has changed
Fix release of buffer
Correct the unpacking order
Fix the DVM - now minimized data transfer to it
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Fix static port wireup by recording the TCP port mpirun is using and correctly passing the regex of hosts to the daemons. Do a better job of closing sockets on failed connection attempts. Correctly identify the remote host in the associated error message.
Fix partial allocation operations by not attempting to set #slots on nodes that were not used, and thus don't have a daemon or topology assigned to them
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
* MCA option to control how long we wait for stack traces:
- orte_timeout_for_stack_trace INTEGER
Default: 30
Setting to <= 0 will cause it to wait forever
* Useful when gathering stack traces from large jobs which might take
a long time.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
Given that we only set OOB contact info from inside of events, or before we begin threaded operations (e.g., in the ess), allow set_contact_info to directly update the oob/base framework globals.
Correct the nidmap regex decompression routine.
Ensure that rank=1 daemon always sends back its topology as this is the most common use-case.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Note: since the discovered cpus are filtered against this list, #slots will be set to the #cpus in the list if no slot values are given in a -host or -hostname specification.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Cleanup a typo, and remove no longer needed MCA params for hetero nodes and hetero apps. Hetero nodes will always be automatically detected. We don't support a mix of 32 and 64 bit apps
Modify the orte_node_t to use orte_topology_t instead of hwloc_topology_t, updating all the places that use it. Ensure that we properly update topology when we see a different one on a compute node.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Samples are taken after MPI_Init, and then again after MPI_Barrier. This allows the user to see memory consumption caused by add_procs, as well as any modex contribution from forming connections if pmix_base_async_modex is given.
Using the probe simply involves executing it via mpirun, with however many copies you want per node. Example:
$ mpirun -npernode 2 ./mpi_memprobe
Sampling memory usage after MPI_Init
Data for node rhc001
Daemon: 12.483398
Client: 6.514648
Data for node rhc002
Daemon: 11.865234
Client: 4.643555
Sampling memory usage after MPI_Barrier
Data for node rhc001
Daemon: 12.520508
Client: 6.576660
Data for node rhc002
Daemon: 11.879883
Client: 4.703125
Note that the client value on node rhc001 is larger - this is where rank=0 is housed, and apparently it gets a larger footprint for some reason.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
