This change fixes the misleading error message. I added a conditional to
determine whether the error is due to a missing file or a bad interpreter.
If it is the latter, a new, more precise error message will be displayed.
Fixes#4528
Signed-off-by: Maxwell Coil <mcoil@nd.edu>
(cherry picked from commit 9b73f6ac83)
* The user can set `-mca odls_base_sigkill_timeout 30` to have ORTE wait
30 seconds before sending SIGTERM then another 30 seconds before sending
SIGKILL to remaining processes. This usually happens on an abnormal
termination. Sometimes the user wants to delay the cleanup to give the
system time to write out corefile or run other diagnostics.
* The problem is that child processes may be completing while ORTE is
in this loop. The SIGCHLD will interrupt the `sleep` system call.
Without the loop the sleep could effectively be ignored in this case.
- Sleep returns the amount of time remaining to sleep. If it was
interrupted by a signal then it is a positive number less than or
equal to the parameter passed to it. If it slept the whole time
then it returns 0.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
(cherry picked from commit 0e8a97c598)
Thanks to @hjelmn for debugging it and providing the patch
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
(cherry picked from commit efa8bcc17078c89f1c9d6aabed35c90973a469bf)
(cherry picked from commit 647a760b7e)
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
This commit removes some code that protected the odls/alps component
from closing alps file descriptors. For some unknown reason leaving
these file descriptors open causes can cause an orted to hang when
launching apps.
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
(cherry picked from commit 98172163e6)
Signed-off-by: Nathan Hjelm <hjelmn@lanl.gov>
The PMIx support for "instant on" remains experimental, so disable it by default. Provide an MCA param and corresponding command line option to enable it at runtime.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
The current code path for PMIx_Resolve_peers and PMIx_Resolve_nodes executes a threadshift in the preg components themselves. This is done to ensure thread safety when called from the user level. However, it causes thread-stall when someone attempts to call the regex functions from _inside_ the PMIx code base should the call occur from within an event.
Accordingly, move the threadshift to the client-level functions and make the preg components just execute their algorithms. Create a new pnet/test component to verify that the prge code can be safely accessed - set that component to be selected only when the user directly specifies it. The new component will be used to validate various logical extensions during development, and can then be discarded.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
(cherry picked from commit 456ac7f7af3d9ba09888e3c899eb001daaa24aef)
This is a point-in-time update that includes support for several new PMIx features, mostly focused on debuggers and "instant on":
* initial prototype support for PMIx-based debuggers. For the moment, this is restricted to using the DVM. Supports direct launch of apps under debugger control, and indirect launch using prun as the intermediate launcher. Includes ability for debuggers to control the environment of both the launcher and the spawned app procs. Work continues on completing support for indirect launch
* IO forwarding for tools. Output of apps launched under tool control is directed to the tool and output there - includes support for XML formatting and output to files. Stdin can be forwarded from the tool to apps, but this hasn't been implemented in ORTE yet.
* Fabric integration for "instant on". Enable collection of network "blobs" to be delivered to network libraries on compute nodes prior to local proc spawn. Infrastructure is in place - implementation will come later.
* Harvesting and forwarding of envars. Enable network plugins to harvest envars and include them in the launch msg for setting the environment prior to local proc spawn. Currently, only OmniPath is supported. PMIx MCA params control which envars are included, and also allows envars to be excluded.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Fix a problem in packing/unpacking job updates. There remains a race condition that causes messages to attempt to be sent to the second new daemon before it is completely ready. Not entirely sure where it is coming from.
Refs #4665
Rebase to master. Reset orte_nidmap_communicated if hosts are added. Check for duplicate hostnames in an add_host command. Turn off tree_spawn for dynamic launch of additional daemons.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Handle the need for different regex generator/parsers by moving the
orte/util/nidmap and orte/util/regex code into a new "regx" framework.
Use the original code to complete a "fwd" component, and create a
scaffold for IBM's "reverse" component.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Now that the daemon calls remote_spawn itself, there is no longer
a need for the "tree_spawn" command nor the associated command
processing code since the HNP is no longer sending a tree-spawn
message to the orted.
Thanks Ralph for the guidance !
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
Only selectable when specifically requested via "-mca odls pspawn"
Note that there are several concerns:
* we aren't getting SIGCHLD calls when the procs terminate
* we aren't seeing the IO pipes close on termination, though
we are getting output forwarded to mpirun
* I haven't found a way to bind the child process prior to exec.
If we want to use this method, we probably need someone to
implement a cgroup component for the orte/rtc framework
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Change the determination of #spawn threads to be done on basis of #local procs in first job being spawned. Someone can look at an optimization that handles subsequent dynamic spawns that might be larger in size.
Leave the threads running, but blocked, for the life of the daemon, and use them to harvest the local procs as they terminate. This helps short-lived jobs in particular.
Add MCA params to set:
* max number of spawn threads (default: 4)
* set a specific number of spawn threads (default: -1, indicating no set number)
* cutoff - minimum number of local procs before using spawn threads (default: 32)
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
if PMIx (version > 1.x) is active since all diagnostic messages will instead flow thru
the PMIx connection. Unfortunately, PMIx v1 does not support this
feature, but we can remove the stddiag support once PMIx v1 slides out
of the support window
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
since some tasks migth end up having /dev/null as their stdin,
simply avoid pipe creation and destruction for these tasks.
From a pragmatic and MPI point of view, and unless explicitly required
otherwise, all MPI tasks but (the first) one end up with /dev/null
as their stdin.
Signed-off-by: Gilles Gouaillardet <gilles@rist.or.jp>
* Resolves#3705
* Components should link against the project level library to better
support `dlopen` with `RTLD_LOCAL`.
* Extend the `mca_FRAMEWORK_COMPONENT_la_LIBADD` in the `Makefile.am`
with the appropriate project level library:
```
MCA components in ompi/
$(top_builddir)/ompi/lib@OMPI_LIBMPI_NAME@.la
MCA components in orte/
$(top_builddir)/orte/lib@ORTE_LIB_PREFIX@open-rte.la
MCA components in opal/
$(top_builddir)/opal/lib@OPAL_LIB_PREFIX@open-pal.la
MCA components in oshmem/
$(top_builddir)/oshmem/liboshmem.la"
```
Note: The changes in this commit were automated by the script in
the commit that proceeds it with the `libadd_mca_comp_update.py`
script. Some components were not included in this change because
they are statically built only.
Signed-off-by: Joshua Hursey <jhursey@us.ibm.com>
Update to support passing of HWLOC shmem topology to client procs
Update use of distance API per @bgoglin
Have the openib component lookup its object in the distance matrix
Bring usnic up-to-date
Restore binding for hwloc2
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
passed to make it all flow thru the opal/pmix "put/get" operations. Update the PMIx code to latest master to pickup some required behaviors.
Remove the no-longer-required get_contact_info and set_contact_info from the RML layer.
Add an MCA param to allow the ofi/rml component to route messages if desired. This is mainly for experimentation at this point as we aren't sure if routing wi
ll be beneficial at large scales. Leave it "off" by default.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Passed the below set of symbols into a script that added ompi_ to them all.
Note that if processing a symbol named "foo" the script turns
foo into ompi_foo
but doesn't turn
foobar into ompi_foobar
But beyond that the script is blind to C syntax, so it hits strings and
comments etc as well as vars/functions.
coll_base_comm_get_reqs
comm_allgather_pml
comm_allreduce_pml
comm_bcast_pml
fcoll_base_coll_allgather_array
fcoll_base_coll_allgatherv_array
fcoll_base_coll_bcast_array
fcoll_base_coll_gather_array
fcoll_base_coll_gatherv_array
fcoll_base_coll_scatterv_array
fcoll_base_sort_iovec
mpit_big_lock
mpit_init_count
mpit_lock
mpit_unlock
netpatterns_base_err
netpatterns_base_verbose
netpatterns_cleanup_narray_knomial_tree
netpatterns_cleanup_recursive_doubling_tree_node
netpatterns_cleanup_recursive_knomial_allgather_tree_node
netpatterns_cleanup_recursive_knomial_tree_node
netpatterns_init
netpatterns_register_mca_params
netpatterns_setup_multinomial_tree
netpatterns_setup_narray_knomial_tree
netpatterns_setup_narray_tree
netpatterns_setup_narray_tree_contigous_ranks
netpatterns_setup_recursive_doubling_n_tree_node
netpatterns_setup_recursive_doubling_tree_node
netpatterns_setup_recursive_knomial_allgather_tree_node
netpatterns_setup_recursive_knomial_tree_node
pml_v_output_close
pml_v_output_open
intercept_extra_state_t
odls_base_default_wait_local_proc
_event_debug_mode_on
_evthread_cond_fns
_evthread_id_fn
_evthread_lock_debugging_enabled
_evthread_lock_fns
cmd_line_option_t
cmd_line_param_t
crs_base_self_checkpoint_fn
crs_base_self_continue_fn
crs_base_self_restart_fn
event_enable_debug_output
event_global_current_base_
event_module_include
eventops
sync_wait_mt
trigger_user_inc_callback
var_type_names
var_type_sizes
Signed-off-by: Mark Allen <markalle@us.ibm.com>
Start updating the various mappers to the new procedure. Remove the stale lama component as it is now very out-of-date. Bring round_robin and PPR online, and modify the mindist component (but cannot test/debug it).
Remove unneeded test
Fix memory corruption by re-initializing variable to NULL in loop
Resolve the race condition identified by @ggouaillardet by resetting the
mapped flag within the same event where it was set. There is no need to
retain the flag beyond that point as it isn't used again.
Add a new job attribute ORTE_JOB_FULLY_DESCRIBED to indicate that all the job information (including locations and binding) is included in the launch message. Thus, the backend daemons do not need to do any map computation for the job. Use this for the seq, rankfile, and mindist mappers until someone decides to update them.
Note that this will maintain functionality, but means that users of those three mappers will see large launch messages and less performant scaling than those using the other mappers.
Have the mindist module add procs to the job's proc array as it is a fully described module
Protect the hnp-not-in-allocation case
Per path suggested by Gilles - protect the HNP node when it gets added in the absence of any other allocation or hostfile
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
