It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now.
This commit was SVN r27527.
The following SVN revision numbers were found above:
r27451 --> open-mpi/ompi@d59034e6ef
r27456 --> open-mpi/ompi@ecdbf34937
specify btl_tcp_if_include because btl_tcp_if_exclude is defaulted to
the loopback devices.
This commit does a few things:
* Introduce a new OPAL MCA base function:
mca_base_param_check_exclusive_string(). It checks to see that the
''user'' does not set two MCA parameters that are mutually
exclusive by checking the source of those MCS param values.
* Use the above function in many BTLs (and the OOB TCP) to ensure
that <foo>_if_include and <foo>_if_exclude are not both specified
''by the user''.
* Re-arrange many of these BTLs to move their MCA registration code
into a separate component_register() function (vs. the
component_open() function).
This code has been nominally reviewed and checked by Ralph, George,
Terry, and Shiqing.
This commit was SVN r25043.
The following SVN revision numbers were found above:
r24976 --> open-mpi/ompi@8f4ac54336
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
- Delete unnecessary header files using
contrib/check_unnecessary_headers.sh after applying
patches, that include headers, being "lost" due to
inclusion in one of the now deleted headers...
In total 817 files are touched.
In ompi/mpi/c/ header files are moved up into the actual c-file,
where necessary (these are the only additional #include),
otherwise it is only deletions of #include (apart from the above
additions required due to notifier...)
- To get different MCAs (OpenIB, TM, ALPS), an earlier version was
successfully compiled (yesterday) on:
Linux locally using intel-11, gcc-4.3.2 and gcc-SVN + warnings enabled
Smoky cluster (x86-64 running Linux) using PGI-8.0.2 + warnings enabled
Lens cluster (x86-64 running Linux) using Pathscale-3.2 + warnings enabled
This commit was SVN r21096.
There is still a problem with OpenIB and threads (external to C/R functionality). It has been reported in Ticket #1539
Additionally:
* Fix a file cleanup bug in CRS Base.
* Fix a possible deadlock in the TCP ft_event function
* Add a mca_base_param_deregister() function to MCA base
* Add whole process checkpoint timers
* Add support for BTL: OpenIB, MX, Shared Memory
* Add support Mpool: rdma, sm
* Sundry bounds checking an cleanup in some scattered functions
This commit was SVN r19756.
put the name of the file that set them if they were set by file. This is of great assistance to support personnel trying to understand why a user is having pro
blems.
Coordinated with Jeff.
This commit was SVN r19111.
meat of it was commented out long ago, anyway (because of the way it
was written, it violates OPAL<->OMPI abstraction barriers); we never
ended up using the MPI keyval MCA parameter stuff. So just delete it.
This commit was SVN r18860.
Lenny and I went back and forth on whether we should simply register
another "mpi_paffinity_alone" MCA param and then try to figure out
which one was set in ompi_mpi_init, but there was difficulty in
figuring out what to do. So it seemed like the Right Thing to do was
to implement what was committed in r18770; then we could tell where
MCA parameters were set from and you could do Better Things (this is
also useful in the openib BTL, where parameters can be set either via
MCA parameter or via an INI file).
But after that was done, it seemed only a few steps further to
actually implement two new features in the MCA params area:
* Synonyms (where one MCA param name is a synonym for another)
* Allow MCA params and/or their synonyms to be marked as "deprecated"
(printing out warnings if they are used)
These features have actually long been discussed/desired, and I had
some time in airports and airplanes recently where I could work in
this stuff on a standalone laptop. So I did it. :-)
This commit introduces these two new features, and then uses them to
register mpi_paffinity_alone as a non-deprecated synonym for
opal_paffinity_alone. A few other random points in this commit:
* Add a few error checks for conditions that were not checked before
* Correct some comments in mca_base_params.h
* Add a few comments in strategic places
* ompi_info now prints additional information:
* for any MCA parameter that has synonyms, it lists all the
synonyms
* synonyms are also output as 1st-class MCA params, but with an
additional attribute indicating that they have a "parent"
* all MCA param name (both "real" or "synonym") will output an
attribute indicating whether it is deprecated or not. A synonym
is deprecated if it iself is marked as deprecated (via the
mca_base_param_regist_syn() or mca_base_param_register_syn_name()
functions) or if its "parent" MCA parameter is deprecated
This commit was SVN r18859.
The following SVN revision numbers were found above:
r18770 --> open-mpi/ompi@8efe67e08c
The following Trac tickets were found above:
Ticket 1383 --> https://svn.open-mpi.org/trac/ompi/ticket/1383
an MCA parameter's value came from. Note that the actual value of the
parameter is irrelevant. For example, if a value was specified in an
MCA parameter file that happened to have the same defaultvalue that
was specified when the parameter was registered, the returned location
will indicate that the value was set from the file.
Possible answers:
* '''MCA_BASE_PARAM_SOURCE_DEFAULT:''' no user-specified values were
found, so the default value was used
* '''MCA_BASE_PARAM_SOURCE_ENV:''' the value came from the
environment (which also means the mpirun/orterun command line!)
* '''MCA_BASE_PARAM_SOURCE_FILE:''' the value came a file (or the
Windows registry)
* '''MCA_BASE_PARAM_SOURCE_KEYVAL:''' the value came from a keyval
(can currently never happen)
* '''MCA_BASE_PARAM_SOURCE_OVERRIDE:''' the value came from an MCA
param API "set" function
This commit was SVN r18770.
* Remove the 'opal_mca_base_param_use_amca_sets' global variable
* Harness the fact that you can (read should) call the cmd_line functions
before initializing opal_init_util(). This pushes the MCA/GMCA/AMCA
command line options into the environment before OPAL inits and starts
to use these values. By putting the cmd_line parse before opal_init_util
in orterun and orted we only parse the *MCA parameter files once, and
correctly (alleviating the need to 'recache' the files on init.)
* Small bits of cleanup.
This commit was SVN r15219.
- mca_base_param_file_prefix
(Default: NULL)
This is the fullname of the "-am" mpirun option. Used to specify a ':'
separated list of AMCA parameter set files.
- mca_base_param_file_path
(Default: $SYSCONFDIR/amca-param-sets/:$CWD)
The path to search for AMCA files with relative paths. A warning will be
printed if the AMCA file cannot be found.
* Added a new function "mca_base_param_recache_files" the re-reads the file
configurations. This is used internally to help bootstrap the MCA system.
* Added a new orterun/mpirun command line option '-am' that aliases for the
mca_base_param_file_prefix MCA parameter
* Exposed the opal_path_access function as it is generally useful in other
places in the code.
* New function "opal_cmd_line_make_opt_mca" which will allow you to append a
new command line option with MCA parameter identifiers to set at the same
time. Previously this could only be done at command line declaration time.
* Added a new directory under the $pkgdatadir named "amca-param-sets" where all
the 'shipped with' Open MPI AMCA parameter sets are placed. This is the first
place to search for AMCA sets with relative paths.
* An example.conf AMCA parameter set file is located in
contrib/amca-param-sets/.
* Jeff Squyres contributed an OpenIB AMCA set for benchmarking.
Note: You will need to autogen with this commit as it adds a configure param.
Sorry :(
This commit was SVN r13867.
The same treatement will happens on all sub-projects. The .h files
have to be C++ compatibles and all symbols with an external visibility
have to get the {PROJECT}_DECLSPEC in front of the prototype.
This commit was SVN r11340.
different macros, one for each project. Therefore, now we have OPAL_DECLSPEC,
ORTE_DECLSPEC and OMPI_DECLSPEC. Please use them based on the sub-project.
This commit was SVN r11270.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
- new preferred API calls for registering MCA parameters are
mca_base_param_reg_{int|string} and
mca_base_param_reg_{int|string}_name.
- See opal/mca/base/mca_base_param.h for docs on new calls.
- Can now register and lookup a value at the same time.
- Can now mark a parameter "read only" at registration time
- Can now mark a parameter "internal" at registration time
- Can now associate a help message with the parameter at registration
time; displayed in the ompi_info output.
The old API calls are still available for backwards compatibility
(mca_base_param_register_{int|string}. They will eventually be
removed -- all developers are encouraged to use the new APIs from here
on out and replace any old calls with the new API.
Some params were also renamed -- the previous convention of using
"base_" as a prefix for any param that was not associated with a
component is henceforth deprecated. Instead, use one of the following
prefixes:
mca: for anything in the MCA base itself
opal: for anything in OPAL
orte: for anything in ORTE
mpi: for anything in OMPI
This commit was SVN r6698.
