Samples are taken after MPI_Init, and then again after MPI_Barrier. This allows the user to see memory consumption caused by add_procs, as well as any modex contribution from forming connections if pmix_base_async_modex is given.
Using the probe simply involves executing it via mpirun, with however many copies you want per node. Example:
$ mpirun -npernode 2 ./mpi_memprobe
Sampling memory usage after MPI_Init
Data for node rhc001
Daemon: 12.483398
Client: 6.514648
Data for node rhc002
Daemon: 11.865234
Client: 4.643555
Sampling memory usage after MPI_Barrier
Data for node rhc001
Daemon: 12.520508
Client: 6.576660
Data for node rhc002
Daemon: 11.879883
Client: 4.703125
Note that the client value on node rhc001 is larger - this is where rank=0 is housed, and apparently it gets a larger footprint for some reason.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Update ORTE support for dynamic PMIx operations e.g., PMIx_Spawn
Update to track master
Ensure that --disable-pmix-dstore actually disables the dstore. Sync to a few debugger updates
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
there is no need for a configure option as well - so remove the
--enable-orte-static-ports configure option. When decoding the daemon
nidmap, mark new daemons as ALIVE by default - we will discover dead
ones as we go.
Signed-off-by: Ralph Castain <rhc@open-mpi.org>
Still not completely done as we need a better way of tracking the routed module being used down in the OOB - e.g., when a peer drops connection, we want to remove that route from all conduits that (a) use the OOB and (b) are routed, but we don't want to remove it from an OFI conduit.
add the option to pass an alternate port to plm
for example
node0 port=2222
directs the plm (via the ORTE_NODE_PORT) attribute to use
the non default port 2222 (e.g. ssh -p 2222 node0 ...)
Multiple conduits can exist at the same time, and can even point to the same base transport. Each conduit can have its own characteristics (e.g., flow control) based on the info keys provided to the "open_conduit" call. For ease during the transition period, the "legacy" RML interfaces remain as wrappers over the new conduit-based APIs using a default conduit opened during orte_init - this default conduit is tied to the OOB framework so that current behaviors are preserved. Once the transition has been completed, a one-time cleanup will be done to update all RML calls to the new APIs and the "legacy" interfaces will be deleted.
While we are at it: Remove oob/usock component to eliminate the TMPDIR length problem - get all working, including oob_stress
* Expand the use of the `orte_keep_fqdn_hostnames` MCA parameter when
it is set to false.
* If that parameter is set to false (default) then short hostnames
(e.g., `node01`) will match with the long hostnames (e.g.,
`node01.mycluster.org`). This allows a user (or resource manager)
to mix the use of short and long hostnames.
- Note that this mechanism does _not_ perform a DNS lookup, but
instead strips off the FQDN by truncating the hostname string at
the first `.` character (when not an IP address).
- By default (`false`) the following is true:
`node01 == node01.mycluster.org == node01.bogus.com`
since we use `node01` as the hostname.
Each process occupies a "slot". We automatically set #slots = #cpus if nothing else is told to us. If you want to run more procs and slots, you must tell us to allow oversubscription.
A process can utilize multiple pe's if that option is given. If you try to bind more than one proc to a given pe, then we will error out unless you tell us to allow overloading.
This seems like an obvious typo: insert a missing "break" statement so
that we don't fall through to the next case.
Fixes CIDs 1362756 and 1362764.
Signed-off-by: Jeff Squyres <jsquyres@cisco.com>
Add PMIx 2.0
Remove PMIx 1.1.4
Cleanup copying of component
Add missing file
Touchup a typo in the Makefile.am
Update the pmix ext114 component
Minor cleanups and resync to master
Update to latest PMIx 2.x
Update to the PMIx event notification branch latest changes
Note that this cannot be used for MPI performance testing. It is really only useful for ORTE scaling tests. It also only works with the rsh/ssh launcher.
Ensure the returned exit status is non-zero if we fail to map
If no -np is given, but either -host and/or -hostfile was given, then error out with a message telling the user that this combination is not supported.
If -np is given, and -host is given with only one instance of each host, then default the #slots to the detected #pe's and enforce oversubscription rules.
If -np is given, and -host is given with more than one instance of a given host, then set the #slots for that host to the number of times it was given and enforce oversubscription rules. Alternatively, the #slots can be specified via "-host foo:N". I therefore believe that row #7 on Jeff's spreadsheet is incorrect.
With that one correction, this now passes all the given use-cases on that spreadsheet.
Make things behave under unmanaged allocations more like their managed cousins - if the #slots is given, then no-np shall fill things up.
Fixes#1344
This reverts commit open-mpi/ompi@f7257a8310.
Ensure that we properly cleanup the session directory tree. Prior code had issues with symlinks, especially if the file that the link points to was already removed as we traverse the tree. Also found that the dirent checks for directory type weren't fully portable, and so fall back to the stat-based approach which is known to be portable.
Fix singularity singletons by detecting we are in a container and properly setting the pmix selection to pick the isolated component. Remove a stale restriction blocking use of the sm btl
* Clean up the DVM so it continues to run even when applications error out and we would ordinarily abort the daemons.
* Create a new errmgr component for the DVM to handle the differences.
* Cleanup the DVM state component.
* Add ORTE bindings directory and brief README
* Pass a local tool index around to match jobs.
* Pass the jobid on job completion.
* Fix initialization logic.
* Add framework for python wrapper.
* Fix terminate-with-non-zero-exit behavior so it properly terminates only the indicated procs, notifies orte-submit, and orte-dvm continues executing.
* Add some missing options to orte-dvm
* Fix a bug in -host processing that caused us to ignore the #slots designator. Add a new attribute to indicate "do not expand the DVM" when submitting job spawn requests.
* It actually makes no sense that we treat the termination of all children differently than terminating the children of a specific job - it only creates confusion over the difference in behavior. So terminate children the same way regardless.
Extend the cmd_line utility to easily allow layering of command line definitions
Catch up with ORTE interface change and make build more generic.
Disable "fixed dvm" logic for now.
Add another cmd_line function to merge a table of cmd line options with another one, reporting as errors any duplicate entries. Use this to allow orterun to reuse the orted_submit code
Fix the "fixed_dvm" logic by ensuring we reset num_new_daemons to zero. Also ensure that the nidmap is sent with the first job so the downstream daemons get the node info. Remove a duplicate cmd line entry in orterun.
Revise the DVM startup procedure to pass the nidmap only once, at the startup of the DVM. This reduces the overhead on each job launch and ensures that the nidmap doesn't get overwritten.
Add new commands to get_orted_comm_cmd_str().
Move ORTE command line options to orte_globals.[ch].
Catch up with extra orte_submit_init parameter.
Add example code.
Add documentation.
Bump version.
The nidmap and routing data must be updated prior to propagating the xcast or else the xcast will fail.
Fix the return code so it is something more expected when an error occurs. Ensure we get an error returned to us when we fail to launch for some reason. In this case, we will always get a launch_cb as we did indeed attempt to spawn it. The error code will be returned in the complete_cb.
Fix the return code from orte_submit_job - it was returning the tracker index instead of "success". Take advantage of ORTE's pretty-print capabilities to provide a nice error output explaining why we failed to launch. Ensure we always get a launch_cb when we fail to launch, but no complete_cb as the job never launched.
Extend the error reporting capability to job completion as well.
Add index parameter to orte_submit_job().
Add orte_job_cancel and implement ORTE_DAEMON_TERMINATE_JOB_CMD.
Factor out dvm termination.
Parse the terminate option at tool level.
Add error string for ORTE_ERR_JOB_CANCELLED.
Add some safeguards.
Cleanup and/of comments.
Enable the return.
Properly ORTE_DECLSPEC orte_submit_halt.
Add orte_submit_halt and orte_submit_cancel to interface.
Use the plm interface to terminate the job
converting an opal_process_name_t means the loss of one bit,
it was decided to restrict the local job id to 15 bits, so the
useful information of an opal_process_name_t can fit in 63 bits.
This required modifying the mca_component_select function to actually check the return code on a component query - it was blissfully ignoring it.
Also do a little cleanup to avoid bombarding the user with multiple error messages.
Thanks to Patrick Begou for reporting the problem
Bring Slurm PMI-1 component online
Bring the s2 component online
Little cleanup - let the various PMIx modules set the process name during init, and then just raise it up to the ORTE level. Required as the different PMI environments all pass the jobid in different ways.
Bring the OMPI pubsub/pmi component online
Get comm_spawn working again
Ensure we always provide a cpuset, even if it is NULL
pmix/cray: adjust cray pmix component for pmix
Make changes so cray pmix can work within the integrated
ompi/pmix framework.
Bring singletons back online. Implement the comm_spawn operation using pmix - not tested yet
Cleanup comm_spawn - procs now starting, error in connect_accept
Complete integration
* don't pass --tree-spawn to the orted cmd line. If someone doesn't want tree-spawn, it shows up as an MCA param anyway
* ensure state/orted component disqualifies itself from CM operations
* clarify the DVM proc_type definitions
* ensure we stop littering the tmp dir with session directories
This commit does two things. It removes checks for C99 required
headers (stdlib.h, string.h, signal.h, etc). Additionally it removes
definitions for required C99 types (intptr_t, int64_t, int32_t, etc).
Signed-off-by: Nathan Hjelm <hjelmn@me.com>
Changing the client to leave its socket as blocking during the connect doesn't solve the problem by itself - you also have to introduce a sleep delay once the backlog is hit to avoid simply machine-gunning your way thru retries. This gets somewhat difficult to adjust as you don't want to unnecessarily prolong startup time.
We've solved this before by adding a listening thread that simply reaps accepts and shoves them into the event library for subsequent processing. This would resolve the problem, but meant yet another daemon-level thread. So I centralized the listening thread support and let multiple elements register listeners on it. Thus, each daemon now has a single listening thread that reaps accepts from multiple sources - for now, the orte/pmix server and the oob/usock support are using it. I'll add in the oob/tcp component later.
This still didn't fully resolve the SMP problem, especially on coprocessor cards (e.g., KNC). Removing the shared memory dstore support helped further improve the behavior - it looks like there is some kind of memory paging issue there that needs further understanding. Given that the shared memory support was about to be lost when I bring over the PMIx integration (until it is restored in that library), it seemed like a reasonable thing to just remove it at this point.
A few uninitialized common symbols are remaining (generated by flex) :
* orte/mca/rmaps/rank_file/rmaps_rank_file_lex.c: orte_rmaps_rank_file_leng
* orte/mca/rmaps/rank_file/rmaps_rank_file_lex.c: orte_rmaps_rank_file_text
* orte/util/hostfile/hostfile_lex.c: orte_util_hostfile_leng
* orte/util/hostfile/hostfile_lex.c: orte_util_hostfile_text
