The new options work by adding an ":if-avail" qualifier to the "bind-to-socket" and "bind-to-core" MCA params. If the system does not support this capability, the job will launch anyway. Without the qualifier, the job will abort with an error message indicating that the required functionality is not supported on this system.
This commit was SVN r21975.
Due to a typo (probably cut/paste error) the CFLAGS/CPPFLAGS/LDFLAGS/LIBS arguments were not propogated to the BLCR component.
This changes a few {{{crs_blcr_check_}}} to {{{crs_blcr_save}}}, which they should have been all along.
This needs to be applied to v1.3 as well :/
This commit was SVN r21860.
#if defined (c_plusplus)
defined (__cplusplus)
followed by
extern "C" {
and the closing counterpart by BEGIN_C_DECLS and END_C_DECLS.
Notable exceptions are:
- opal/include/opal_config_bottom.h:
This is our generated code, that itself defines BEGIN_C_DECL and
END_C_DECL
- ompi/mpi/cxx/mpicxx.h:
Here we do not include opal_config_bottom.h:
- Belongs to external code:
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.c
opal/mca/backtrace/darwin/MoreBacktrace/MoreDebugging/MoreBacktrace.h
- opal/include/opal/prefetch.h:
Has C++ specific macros that are protected:
- Had #if ... } #endif _and_ END_C_DECLS (aka end up with 2x
END_C_DECLS)
ompi/mca/btl/openib/btl_openib.h
- opal/event/event.h has #ifdef __cplusplus as BEGIN_C_DECLS...
- opal/win32/ompi_process.h: had extern "C"\n {...
opal/win32/ompi_process.h: dito
- ompi/mca/btl/pcie/btl_pcie_lex.l: needed to add *_C_DECLS
ompi/mpi/f90/test/align_c.c: dito
- ompi/debuggers/msgq_interface.h: used #ifdef __cplusplus
- ompi/mpi/f90/xml/common-C.xsl: Amend
Tested on linux using --with-openib and --with-mx
The following do not contain either opal_config.h, orte_config.h or
ompi_config.h
(but possibly other header files, that include one of the above):
ompi/mca/bml/r2/bml_r2_ft.h
ompi/mca/btl/gm/btl_gm_endpoint.h
ompi/mca/btl/gm/btl_gm_proc.h
ompi/mca/btl/mx/btl_mx_endpoint.h
ompi/mca/btl/ofud/btl_ofud_endpoint.h
ompi/mca/btl/ofud/btl_ofud_frag.h
ompi/mca/btl/ofud/btl_ofud_proc.h
ompi/mca/btl/openib/btl_openib_mca.h
ompi/mca/btl/portals/btl_portals_endpoint.h
ompi/mca/btl/portals/btl_portals_frag.h
ompi/mca/btl/sctp/btl_sctp_endpoint.h
ompi/mca/btl/sctp/btl_sctp_proc.h
ompi/mca/btl/tcp/btl_tcp_endpoint.h
ompi/mca/btl/tcp/btl_tcp_ft.h
ompi/mca/btl/tcp/btl_tcp_proc.h
ompi/mca/btl/template/btl_template_endpoint.h
ompi/mca/btl/template/btl_template_proc.h
ompi/mca/btl/udapl/btl_udapl_eager_rdma.h
ompi/mca/btl/udapl/btl_udapl_endpoint.h
ompi/mca/btl/udapl/btl_udapl_mca.h
ompi/mca/btl/udapl/btl_udapl_proc.h
ompi/mca/mtl/mx/mtl_mx_endpoint.h
ompi/mca/mtl/mx/mtl_mx.h
ompi/mca/mtl/psm/mtl_psm_endpoint.h
ompi/mca/mtl/psm/mtl_psm.h
ompi/mca/pml/cm/pml_cm_component.h
ompi/mca/pml/csum/pml_csum_comm.h
ompi/mca/pml/dr/pml_dr_comm.h
ompi/mca/pml/dr/pml_dr_component.h
ompi/mca/pml/dr/pml_dr_endpoint.h
ompi/mca/pml/dr/pml_dr_recvfrag.h
ompi/mca/pml/example/pml_example.h
ompi/mca/pml/ob1/pml_ob1_comm.h
ompi/mca/pml/ob1/pml_ob1_component.h
ompi/mca/pml/ob1/pml_ob1_endpoint.h
ompi/mca/pml/ob1/pml_ob1_rdmafrag.h
ompi/mca/pml/ob1/pml_ob1_recvfrag.h
ompi/mca/pml/v/pml_v_output.h
opal/include/opal/prefetch.h
opal/mca/timer/aix/timer_aix.h
opal/util/qsort.h
test/support/components.h
This commit was SVN r21855.
The following SVN revision numbers were found above:
r2 --> open-mpi/ompi@58fdc18855
- add a cmake module for searching libltdl libraries and headers
- a configure option to enable DSO build, default OFF.
- update a few source files for including correct header
and loading correct mca libraries path/suffix.
This commit was SVN r21804.
Adds several new mpirun options:
* -bysocket - assign ranks on a node by socket. Effectively load balances the procs assigned to a node across the available sockets. Note that ranks can still be bound to a specific core within the socket, or to the entire socket - the mapping is independent of the binding.
* -bind-to-socket - bind each rank to all the cores on the socket to which they are assigned.
* -bind-to-core - currently the default behavior (maintained from prior default)
* -npersocket N - launch N procs for every socket on a node. Note that this implies we know how many sockets are on a node. Mpirun will determine its local values. These can be overridden by provided values, either via MCA param or in a hostfile
Similar features/options are provided at the board level for multi-board nodes.
Documentation to follow...
This commit was SVN r21791.
Refs trac:1987
The patch for v1.3 attached to Ticket #1987 already includes this change.
I did not have a chance to commit this last night, so sorry for the delay.
This commit was SVN r21777.
The following Trac tickets were found above:
Ticket 1987 --> https://svn.open-mpi.org/trac/ompi/ticket/1987
* Check for {{{dlfcn.h}}} in the self component's configure.m4 (also clean up the .m4 a bit.
* Adjust the priority of the BLCR component so that the self component has a higher priority (if the application went to the trouble of writing the routines, why not use them.) The 'self' component checks for the appropriate functions during query, so it know if it -can- be used during component selection.
* Adjust some copyrights that I missed before
* Fix a warning when casing the result of dlsym() into a function pointer. There is a bit of pointer magic to make this happen (thanks to the following website, and RedHat EL 4 man pages for illustrating it:
http://www.opengroup.org/onlinepubs/009695399/functions/dlsym.html
Passing to Jeff for a final review of the patch before moving to v1.3.
This commit was SVN r21768.
The following SVN revision numbers were found above:
r21766 --> open-mpi/ompi@91e52d062b
Due to the visibility patch to libltdl in r21731, this module can no longer access or use the libltdl interfaces directly. Instead just use the dlopen/dlsym/dlclose functions directly. This is a portability implication here, but for the moment it does not seem to bite us.
Also in this patch, cleanup some of the 'self' specific code paths.
* opal-restart need not special case the 'self' component since it can now interact with it as if it were a normal component.
* Cleanup the initialization of the cmd line arguments in opal-restart.
* Make sure to mark opal-restart as a 'tool', but do so by setting the global variable directly instead of setting the environment variable, which could be inherited by the application.
* Most of the functions in the 'self' component should not be used by a command line tool (exception being 'restart'), so make sure that if we accidently call them then errors are returned.
* Increase the priority of the 'none' component to be above that of 'self' when being selected in a command line tool. This allows for both mpirun and opal-restart to work correctly with the 'self' module.
This commit was SVN r21766.
The following SVN revision numbers were found above:
r21731 --> open-mpi/ompi@0278b86456
* Installation directories will be inferred from the actual location
of the shared library that contains the component.
* OPAL_PREFIX and other environment variables allow users to override
the inferred directories. They should no longer be necessary in
most cases, though.
* Any directories that cannot be inferred will fall back to whatever
is provided by the config installdirs component.
This commit was SVN r21723.
Revamp the affinity detection/set procedure in mpi_init to correctly detect when we have already been bound to processors, given the revised understanding of paffinity_get. Add a new paffinity macro to make checking for already bound a little nicer.
This commit was SVN r21402.
Libltdl erroneously returns an error string of "file not found" for
lots of reasons, even if the file really *is* there, but just failed
to dlopen() for some reason. So if lt_dlerror() returns "file not
found", do some simple hueristics and if we *do* find a file, print a
slightly better error message.
This commit was SVN r21214.
1. replacing mpi_paffinity_alone with opal_paffinity_alone - for back-compatibility, I have aliased mpi_paffinity_alone to the new param name. This caus
es a mild abstraction break in the opal/mca/paffinity framework - per the devel discussion...live with it. :-) I also moved the ompi_xxx global variable
that tracked maffinity setup so it could be properly closed in MPI_Finalize to the opal/mca/maffinity framework to avoid an abstraction break.
2. Added code to the odls/default module to perform paffinity binding and maffinity init between process fork and exec. This has been tested on IU's odi
n cluster and works for both MPI and non-MPI apps.
3. Revise MPI_Init to detect if affinity has already been set, and to attempt to set it if not already done. I have *not* tested this as I haven't yet f
igured out a way to do so - I couldn't get slurm to perform cpu bindings, even though it supposedly does do so.
This has only been lightly tested and would definitely benefit from a wider range of evaluation...
This commit was SVN r21209.
* Pass the sequence number of the checkpoint along with reference from the global to the local coordinator.
* 'orte-restart --apponly' now just generates the app context file, and does not run with it. This provides the user the ability to edit the file before launching.
* Add a OPAL_CRS_NONE state
* Split the INC into three distinct parts.
* Implement a restart mechanism for the 'none' component. If given a context it simply execvp()'s it.
This commit was SVN r21195.
* Add 'orte-checkpoint -l' option that lists all checkpoints currently available on the system.
* Add 'orte-restart -i' which prints information regarding the checkpoint targeted for restart.
* Add ability to extract the timing metadata.
* Fix show_help() in the orte-checkpoint and orte-restart tools. They should be using the opal versions instead of the orte versions (otherwise nothing is printed).
This commit was SVN r21194.
OMPI_* to OPAL_*. This allows opal layer to be used more independent
from the whole of ompi.
NOTE: 9 "svn mv" operations immediately follow this commit.
This commit was SVN r21180.
This patch contains the following items:
* Fix the flag passed to open() for the read side of the named pipe between the local and app coordinator. There is a race condition when using O_RDWR on a named pipe (not sure how that bug got in there in the first place).
* Adjust control in the C/R thread timing
* Clarify return code in BLCR component
* Allow the user to adjust the max wait time for the named pipes in the FileM local coordinator by using the MCA parameter "snapc_full_max_wait_time" (Default: 20 seconds)
* If the application terminates while there are active FileM operations, force mpirun to wait on these operations to complete.
* Allow the user to set the local copy command (Default: cp) via MCA parameter "filem_rsh_cp"
* Implement the ability to throttle the number of outgoing connections in FileM. At larger scales this type of explicit throttling helps prevent overwhelming the HNP machine. Default: 10, set via MCA parameter: {{{filem_rsh_max_outgoing}}}
This commit was SVN r21167.
The following SVN revision numbers were found above:
r21131 --> open-mpi/ompi@0deb009225
