r10841, so revert it (and it's fixes) out. Will bring back once cleaned up from
the code used in the tbird experiment
This commit was SVN r10991.
The following SVN revision numbers were found above:
r10841 --> open-mpi/ompi@dfa1221c3b
handler before the write() and de-register it afterwards. Determine
if the write() succeeded or failed by the return of write().
This commit was SVN r10858.
than $(LN_S). This causes problems with with Windows and probably
elsewhere (re: #200). So use a slightly different trick to get the
right header selected for the MEMCPY and TIMER components.
* Using the same trick used to solve the AC_CONFIG_LINKS problem,
stop using a separate header file for direct calling in the
PML and MTL. This lets me remove some icky code in ompi_mca.m4
that was more fragile than I really liked.
This commit was SVN r10841.
Since Jeff and I are going to a branch for T-bird, we have restored the trunk to its prior state to avoid any possibility of disturbing it.
This commit was SVN r10774.
Please report any abnormal behavior during launch, though, as we would like to understand what (if any) impact is seen. I couldn't see any on small jobs (the modulo functions render this number down pretty low).
This commit was SVN r10763.
copy of the receive buffer based on the iovec struct that may have been updated
during partial reads to reflect the current offset. Need to make the copy using
the base address of the buffer.
Thanks to Sven Stork for finding this.
This should be backported to 1.0.X and 1.1.X branches.
This commit was SVN r9749.
thread, which will do progress independently of MPI. So in this case we
have to call opal_event_loop instead of opal_progress.
This commit was SVN r9551.
event library (since the event library has its own thread). So when
we are using progress threads, we really want to call opal_event_loop()
and not opal_progres().
This commit was SVN r9549.
- moved hton64 and ntoh64 from the bunch of places it had been copied
into one header file
- properly set and use the btl_tcp's nbo option to put things in
network byte order on the wire if both sides don't have the same
endianness
- Put the OB1 PML's headers (with a couple exceptions I need to discuss
with Tim) in network byte order on the wire if both sides don't have
the same endianness
- since it was needed for the TCP BTL, move the orte_process_name_t
HTON and NTOH macros from the TCP OOB to ns_types.h
This commit was SVN r9145.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
intended to include the OMPI_DEBUG_ZERO call).
These debugging statements should not have affected correcteness
because the value of 78 will be overridden in the read() and the
assert()/abort() stuff will only be triggered on an error which should
never happen (i.e., the error should have been handled by the prior if
conditional). But still, thise code should not be there.
This commit was SVN r8649.
The following SVN revision numbers were found above:
r8643 --> open-mpi/ompi@a6b869ed68
- Need to make sure that SIZE_MAX exists as a constant if stdint.h
doesn't exist
- struct timeval is defined in unistd.h on IRIX, so need to include
that headerfile where ever struct timeval is used.
This commit was SVN r8361.
* turns out (duh!) that there was a reason that the <projectdir>dir
variable was set in the AM conditional. If not, stupid directories
are created and not needed... duh.
This commit was SVN r8205.
component/base Makefile.am files, reducing the time configure spends
stamping out Makefiles at the end
* Install base_impl.h file when devel-headers are being installed
This commit was SVN r8200.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
some orted's to stall on locks in the MPI Dynamics cases. Since it
is not essentual that we call these functions, they can so away.
Unlock the peer lock when aborting. This causes a potential deadlock
in do_waitall [see comment in code]. This was causing orteds to
deadlock at times when the seed had terminated. With proper interleaving
and timing the orted was deadlocking. This seems to have fixed this in
my stress testing with MPI 2 Dynamics.
This commit was SVN r7539.
with the mutex locked and as this function will call oob_send which will call the lookup again
... we will deadlock as the mutex is already lock. The solution is to release the mutex before
going into the subscription. Then of course the logic to remote the item when something went
wrong with the subscrition is a little bit more complex.
This commit was SVN r7429.
However we do want to do a bit of cleanup on the node before we exit,
specificly clean out the session directory. I also had a couple of the
subsystems that don't depend upon peers (which is key) clean up as well.
Pedantic formatting issue in oob_tcp.h
This commit was SVN r7387.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
CTRL-C'd.
We were calling orte_finalize recursively which caused a segv when it tried to
use a freed framework (orte_rmgr in this case).
I added a status flag to orte_universe_info to indicate where we are in the code.
This was needed to determine if we should call orte_abort or not when shutting
down in the tcp oob.
This commit was SVN r7160.
add a -I to find the included ltdl.h (vs. a system-installed ltdl.h)
- Clean up kruft in a bunch of Makefile.am's to remove now-unnecessary
AM_CPPFLAGS settings to get static-components.h for each framework
- Move the component_repository API functions out of opal/mca/base/base.h
and into opal/mca/base/mca_base_component_repository.h in order to
decrease unnecessary dependencies (e.g., before this, almost
everything in the tree depended on ltdl.h, which is unnecessary --
only a small number of files really need ltdl.h)
This commit was SVN r7127.
Here's the huge registry check-in you've all been waiting for with baited breath. The revised version sends a single message to all processes at the various stage gates, thus making the startup much more scalable. I could provide you with all the tawdry details, but won't for now - you are welcome to ask, though, and I'll merrily bore your ears to tears.
In addition, the commit contains the following:
1. set the ignore properties on ompi/debuggers and orte/mca/pls/poe
2. Added simplified subscribe and put functions to the registry's API. I have also converted all of the ompi functions that registered subscriptions to the new API, and caught their associated put's as well.
In a follow-on commit, I'll be adding support for George's hetero arch registry subscription (wanted to get this one in first).
This commit was SVN r7118.
- change the framework opens to [mostly] use the new MCA param API
- properly pass in framework debug output streams to the
mca_base_component_open() function
This commit was SVN r6888.
This required a little fiddling with a number of areas. Biggest problem was that it uncovered a potential for an infinite loop to be created in the registry. If a callback function modified the registry, the registry checked the triggers to see if anything had fired. Well, if the original callback was due to a trigger firing, that condition hadn't changed - so the trigger fired again....which caused the callback to be called, which modified the registry, which checked the triggers, etc. etc.
Triggers are now checked and then "flagged" as being "in process" so that the registry will NOT recheck that trigger until all callbacks have been processed. Tried doing this with subscriptions as well, but that caused a problem - when we release processes from a stagegate, they (at the moment) immediately place data on the registry that should cause a subscription to fire. Unfortunately, the system will just hang if that subscription doesn't get processed. So, I have left the subscription system alone - any callback function that modifies the registry in a fashion that will fire a subscription will indeed fire that subscription. We'll have to see if this causes problems - it shouldn't, but a careless user could lock things up if the callback generates a callback to itself.
Also fixed the code that placed a process' RML contact info on the registry to eliminate the leading '/' from the string.
This commit was SVN r6684.
1. Modify the registry to eliminate redundant data copying for startup messages.
2. Revise the subscription/trigger system to avoid redundant storage of triggers and subscriptions. This dramatically reduces the search time when a registry action occurs - to illustrate the point, there are now only a handful of triggers on the system for each job. Before, there were a handful of triggers for each PROCESS in the job, all of which had to be checked every time something happened on the registry. This is much, much faster now.
3. Update all subscriptions to the new format. There are now "named" subscriptions - this allows you to "name" a subscription that all the processes will be using. The first one to hit the registry actually defines the subscription. From then on, any subsequent "subscribes" to the same name just cause that process to "attach" to the existing subscription. This keeps the number of subscriptions being tracked by the registry to a minimum, while ensuring that each process still gets notified.
4. Do the same for triggers.
Also fixed a duplicate subscription problem that was causing people to receive data equal to the number of processes times the data they should have received from a trigger/subscription. Sorry about that... :-( ...but it's all better now!
Uncovered a situation where the modex data seems to be getting entered on the registry a second time - the latter time coming after the compound command has been "fired", thereby causing all the subscriptions to fire. Asked Tim and Jeff to look into this.
Second phase of the changes will involve modifying the xcast system so that the same message gets sent to all processes. This will further reduce the message traffic, and - once we have a true "broadcast" version of xcast - really speed things up and improve scalability.
This commit was SVN r6542.
sockaddr_in - seems to be a good indicator)
* disable util/if code if no inet devices (again, no sockaddr_in)
* add enable/disable flag to disable stacktrace pretty-print code
(defaults to enabled). Seems there's something funky going on with
the preprocessor on Red Storm that was causing problems - this was
the easiest fix
* clean up a bunch of the configure.m4 files to remove bogus comments,
properly comment them, fix the dumb logic for happy/unhappy
* Create a macro for testing both header and library for a package,
since we seem to do this kind of test quite often. Handles the
-I and -L search paths properly (including stripping out /usr and
/usr/local if not needed)
* Converted mvapi components to configure.m4, using the nice new
ompi_check_package macro (above)
This commit was SVN r6454.
* rename ompi_malloc to opal_malloc
* rename ompi_numtostr to opal_numtostr
* start of rename of ompi_environ to opal_environ
This commit was SVN r6332.
* rename ompi_basename to opal_basename
* rename ompi bitop functions to opal
* rename ompi_cmd_line to opal_cmd_line
* rename ompi_sizet2int to opal_sizet2int
* rename orte_daemon_init to opal_daemon_init
* rename ompi_few to opal_few
This commit was SVN r6330.
