If ibv_create_ah fails, we will not initialize the `endpoint->proc`.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30840.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
This functionality is required for routable UDP/IP usnic traffic.
Previously we would only setup endpoints for remote interfaces on the
same subnet as the current module's local interface. This behavior
still holds if two processes share any common subnets. However, if the
two processes only have no subnets in common then we assume that all
interfaces are reachable from all other interfaces and wire them up in a
1-1, randomly-matched order somewhat similarly to the "tcp" BTL's
behavior.
Only match in different subnets if we detect UDP support in the lower
layer.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30839.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
This commit decouples OMPI deployment from the version(s) of the lower
layers of the stack by probing for UDP support.
Verbs applications assume a 40-byte header (there is no current
mechanism for querying payload offset). So to support a 42-byte UDP
header without causing existing applications like ibv_ud_pingpong or
older versions of OMPI to crash, we must inform libusnic_verbs that we
are aware of the nonstandard payload offset. We do this by overriding
the `transport_type` field of the device to be 42 before calling
`ibv_open_device`. If the library resets it to something else, then we
know the lower layers are UDP capable. Otherwise we use the older
custom-L2 format.
This necessitated some minor ugliness in common_verbs, but it's as tidy
as Jeff and I know how to make it right now.
This commit only adds support for UDP headers and connectivity over the
same L2 network, it does not touch routing or interface pairing.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30838.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Just trying to be deliberate about keeping fastpath-accessed fields
grouped together to fit into the same 64-byte cache line.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30837.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30836.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30835.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Reese Faucette <rfaucett@cisco.com>
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30834.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Authored-by: Reese Faucette <rfaucett@cisco.com>
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30833.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
Valgrind showed this one, just a bit of sloppiness with the reference
counting.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:ticket=trac:4253
This commit was SVN r30832.
The following Trac tickets were found above:
Ticket 4253 --> https://svn.open-mpi.org/trac/ompi/ticket/4253
1. Changed rng_buff_t --> opal_rng_buff_t
2. All global variables obey the prefix rule
3. Old code has been removed
4. Found a couple of unnecessary includes
Refs trac:4298
This commit was SVN r30807.
The following Trac tickets were found above:
Ticket 4298 --> https://svn.open-mpi.org/trac/ompi/ticket/4298
We're going to be bringing a bunch of usnic code to the SVN trunk
soon, and I basically brought this commit over out of order. So I'm
reverting it for now; the same functionality will come back shortly.
This commit was SVN r30805.
The following SVN revision numbers were found above:
r30804 --> open-mpi/ompi@5bedcc15bf
These constants are now upstream (see
https://git.kernel.org/cgit/libs/infiniband/libibverbs.git/commit/?id=f57a9c67eabb9e7f19c624ac3c8c27b7be55796c),
so let's support them properly in Open MPI.
Added bonus: consolidating these checks up in
ompi_check_openfabrics.m4 allowed removing some custom checks and
AC_DEFINE's from the usnic configure.m4 script.
Also change the usnic/configure.m4 check for IBV_EVENT_GID_CHANGE to
use AC_CHECK_DECLS (vs. AC_CHECK_DECL).
cmr=v1.7.5:reviewer=dgoodell
This commit was SVN r30804.
* Use the prefix rule for global variables
* Elimiante seed_prng() since it isn't necessary any more
These files will need to get edited again then the RNG type obeys the
prefix rule.
Refs trac:4298
This commit was SVN r30803.
The following SVN revision numbers were found above:
r30801 --> open-mpi/ompi@e39d9f4080
The following Trac tickets were found above:
Ticket 4298 --> https://svn.open-mpi.org/trac/ompi/ticket/4298
Some older versions of libibverbs do not have `ibv_event_type_str`,
leading to compilation failures on older machines, irrespective of
whether they could ever support usNIC anyway. If we encounter any other
build issues related to "old verbs" then we should just cause the usnic
BTL to disqualify itself when it encounters "old" traits.
Thanks to Paul Hargrove for reporting the issue:
http://www.open-mpi.org/community/lists/devel/2014/02/14056.php
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30674.
only goes up to VADER_MAX_ADDRESS instead of 0xfffffffffffffffful.
cmr=v1.7.5:ticket=trac:4216
This commit was SVN r30669.
The following Trac tickets were found above:
Ticket 4216 --> https://svn.open-mpi.org/trac/ompi/ticket/4216
The error was caused by leaving the pipe to the async thread uninitialized, then writing to it regardless of this.
Fix is to check the existance of the async thread and the pipe to it.
reviewd by miked
cmr=v1.7.5:reviewer=ompi-rm1.7
This commit was SVN r30644.
for 32-bit architectures.
This commit also modifies _OMPI_CHECK_HEADER to use AC_CHECK_HEADERS instead
of AC_CHECK_HEADER. This allows components to check for multiple headers
instead of just one. The new semantics of the header check in OMPI_CHECK_PACKAGE
are to return success if at least one of the specified headers exists. The new
semantics will not break current usage.
cmr=v1.7.5:ticket=trac:4053
This commit was SVN r30476.
The following Trac tickets were found above:
Ticket 4053 --> https://svn.open-mpi.org/trac/ompi/ticket/4053
Also add a verbose flag so one can see what devices are selected as well as another flag to override
locality information and use all devices on the node.
This commit was SVN r30287.
Avoid compiler warning about (unnecessarily) initializing 2 variables
during instantiation at the top of a switch block (but outside of any
case statements): just declare the variables at the top of the outter
block. They're already safely initialized, so don't worry about
initializing them in the instantiation.
Reviewed by Dave Goodell.
cmr=v1.7.4:reviewer=ompi-rm1.7:subject=Don't instantiate+init variables in a switch block
This commit was SVN r30228.
needed for correctness. The if_include/if_exclude are level 1, and
the TCP port range params are level 2; this parameter seems to be on
par with the TCP port range params.
Refs trac:4019
This commit was SVN r30161.
The following Trac tickets were found above:
Ticket 4019 --> https://svn.open-mpi.org/trac/ompi/ticket/4019
* Remove some set-but-not-used variables
* Make a convenience function return void (we weren't using the
return code, anyway)
* Mark a function as inline (it was supposed to be inline anyway)
Reviewed by Dave Goodell.
cmr=v1.7.5:reviewer=ompi-rm1.7:subject=Fix usnic BTL compiler warnings
This commit was SVN r30160.
Thanks to Tetsuya Mishima for detecting it!
cmr=v1.7.4:reviewer=jsquyres:subject=Correct tcp_not_use_nodelay option processing
This commit was SVN r30157.
configury/Makefile.am changes; this commit renames the internal
installdirs.h framework struct field names to match the configry macro
names:
* pkgdatdir -> ompidatadir
* pkglibdir -> ompilibdir
* pkgincludedir -> ompiincludedir
This commit was SVN r30145.
The following SVN revision numbers were found above:
r30140 --> open-mpi/ompi@8b778903d8
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
Complements r30073: tighten up the string parsing of the vendor parts
ID MCA param a bit. Also fix a small memory leak: ensure to free the
array uint32_t's parsed out of the MCA param.
This commit was SVN r30128.
The following SVN revision numbers were found above:
r30073 --> open-mpi/ompi@6003702a51
The following Trac tickets were found above:
Ticket 4301 --> https://svn.open-mpi.org/trac/ompi/ticket/4301
This commit adds support for placing the send memory segment in a
traditional shared memory segment when XPMEM is not available. The
current default is to reserve 4MB for shared memory on each process.
The latest benchmarks show vader performing better than sm on both
Intel and AMD CPUs.
For large messages vader will now use CMA if it is available (and
XPMEM is not).
cmr=v1.7.5:reviewer=jsquyres
This commit was SVN r30123.
Per RFC which expired two weeks ago:
We are planning to make a change to Open MPI to always set up the btls. This
means the btl init will be called even if add_procs is never called for that
btl. In the openib btl free lists fragments are currently allocated in btl_init.
To avoid wasting that memory this commit moves that final device setup to
the add_procs function. This included allocating free lists, and starting the
async event thread.
At this time this change is safe since we have a barrier after add_procs in
MPI_Init. If this changes we will need to re-think some of the initialization
since we might have the possibility of a connection request before add_procs
is called.
Tested with Mellanox ConnectX2 and QLogic HCAs.
Commit also cleans up tabs in btl_openib_async.c.
cmr=v1.7.5:reviewer=miked
This commit was SVN r30122.
1. Fix ompi_info memory leak in usnic BTL: do not allocate memory in
the component register function, because ompi_info only calls the
component register function and then dlclose's the component -- it
does not call component finalize. Instead, defer parsing the MCA
param (and alloc'ing memory) until the component init function so
that any allocated memory can be freed in the component close
function.
1. Also add a new check to ensure that we actually have some part
numbers to check. Add a show_help message if we don't find any
vendor part IDs to check.
1. Add a verbose output if usnic disqualifies itself from selection
because THREAD_MULTIPLE was specified.
cmr=v1.7.5:reviewer=dgoodell
This commit was SVN r30073.
branch (it's not necessary on trunk/v1.7 because they require C99,
which allows variadic macros).
Also fix another compiler warning (using %p to print a (void*)).
Submitted by Jeff, reviewed by Dave.
cmr=v1.7.4:reviewer=ompi-rm1.7:subject=two usnic BTL fixes
This commit was SVN r29966.
usnic_channel_finalize() was deregistering recv buffers before
destroying the QP to which they were posted. The QP needs to be
destroyed first so that the NIC does not attemp tto write to
deregistered memory, causing the DMAR messages.
Submitted by Reese, reviewed by Jeff.
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r29963.
discovered when removing some components.
This commit was SVN r29895.
The following SVN revision numbers were found above:
r29894 --> open-mpi/ompi@58ed00296c
cmr=v1.7.4:reviewer=brbarret:subject=Disqualify sm btl for hetero procs
This commit was SVN r29882.
The following Trac tickets were found above:
Ticket 2433 --> https://svn.open-mpi.org/trac/ompi/ticket/2433
For exammple, mca_btl_sm.knem_fd remained 0, and mca_btl_sm_component_close() ended up doing closing fd 0 which belongs to someone else.
fixed by Yossi, reviewed by miked
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r29875.
flexible members.
UDCM is ready to go for 1.7.4 with this patch.
cmr=v1.7.4:ticket=3940
This commit was SVN r29861.
The following Trac tickets were found above:
Ticket 3940 --> https://svn.open-mpi.org/trac/ompi/ticket/3940
Note that this event should never happen within a single OMPI job,
because OMPI will ignore usnic ports that are down. The PORT_ACTIVE
event should only occur if a port ''was'' down and is now ''up''. But
what the heck -- if we ever do get this event, it is harmless -- just
ignore it.
This commit was SVN r29852.
This is helpful in the work for #3694: ensure that many places that
eventually end up in configure don't overly-pollute the global shell
variable space (because debugging accidental shell variable pollution
can be a real pain).
Refs trac:3694
This commit was SVN r29830.
The following Trac tickets were found above:
Ticket 3694 --> https://svn.open-mpi.org/trac/ompi/ticket/3694
On the off chance that the PML is twiddling fields that it really
shouldn't be...
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
This commit was SVN r29804.
MOFED apparently has a /usr/include/infiniband/verbs.h that also
defines a (slightly different but fully compatible) container_of
macro. So put proper #ifndef protection around our definition of
container_of.
Thanks to Rolf vandeVaart for pointing out the issue.
Reviewed by Dave Goodell.
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r29799.
Originally udcm acks used the immediate data to indicate which message was
being acknowleged. This data was (mysteriously) junk when using QLogic HCAs so I
updated udcm to use the source info (slid, qp, etc) to determine which message was being
acked. This works as long as we don't have two messages simultaneously in flight
to a particular peer and then loose the first of the two messages. The chances of this
happening are tiny. To fix this case I updated the udcm message header to include
a pointer to the in flight message. This pointer is then sent back to the sending
process to ack receipt.
cmr=v1.7.4:ticket=trac:3940
This commit was SVN r29775.
The following Trac tickets were found above:
Ticket 3940 --> https://svn.open-mpi.org/trac/ompi/ticket/3940
This commit updates the udcm cpc to support xrc. The steps followed by udcm
mimic those in the removed xoob cpc. This update has been tested with both XRC
and RC.
Mellanox, this is intended to go into 1.7.4. Please review carefully and let
me know if there are any issues.
cmr=v1.7.4:reviewer=miked
This commit was SVN r29767.
To support the new mpool two changes were made to the mpool infrastructure:
1) Added an mpool flag to indicate that an mpool does not need the memory
hooks to use the leave pinned protocols. This flag is checked in the
mpool lookup.
2) Add a mpool context to the base registration. This new member is used
by the udreg mpool to store the udreg context associated with the
particular registration. The new member will not break the ABI
compatibility as the new member is only currently used by the udreg
mpool.
Dynamics support for Cray systems makes use of the global rank provided by
orte to give the ugni library a unique rank for each process. Dynamics
support is not available under direct-launch (srun.)
cmr=v1.7.4
This commit was SVN r29719.
http://www.open-mpi.org/community/lists/devel/2013/10/13072.php
Add support for pinning GPU Direct RDMA in openib BTL for better small message latency of GPU buffers.
Note that none of this is compiled in unless CUDA-aware support is requested.
This commit was SVN r29680.
Gah! The "device" variable isn't used at all in this loop (my eye
glossed over the next line and thought that "device" was used in the
free() statement, but it's actually "devices" -- not "device").
This commit was SVN r29665.
The following Trac tickets were found above:
Ticket 3091 --> https://svn.open-mpi.org/trac/ompi/ticket/3091
<usnic device name>,<eth device>,<ip address>/<CIDR prefix>
For example:
usnic_0,eth4,10.1.0.15/16
This is just handy for mapping the usnic_X device back to the IP
network to which it corresponds.
This commit was SVN r29656.
Resolves a hang when using scif for shared memory transfers. This is a
simple change and doesn't require a review.
cmr=v1.7.4:reviewer=ompi-rm1.7
This commit was SVN r29653.
Cisco v1.6 git commit 913ec6c and upstream trunk r29593 (segfault fix)
introduced a performance regression by inadvertently disabling the
`module_recv_buffers` functionality. With those changes in place, the
`btl_usnic_recv.c` logic would end up mallocing a buffer that should
have otherwise come from a `module_recv_buffers` pool. It also resulted
in a small, bounded memory leak (128 buffers at each power-of-two size
interval).
The new version just places the buffer after the free list item with a
flexible array member. I bumped the pool to allocate all 128 elements
up front because the deferred allocation was modestly impacting IMB
Sendrecv performance at a few sizes.
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
This commit was SVN r29631.
The following SVN revision numbers were found above:
r29593 --> open-mpi/ompi@1ed9b8ff43
Without this commit, if you run IMB pingpong between two nodes with only
one usnic selected (e.g., via `--mca btl_usnic_if_include usnic_0`) then
the run will seem fine but will segfault at MPI_Finalize time.
This behavior has happened since Cisco v1.6 git commit ec7ddf8, upstream
trunk r29484, and upstream v1.7 r29507.
Root cause was that the free list element was being used as the recv
buffer instead of the data buffer associated with the element. So the
reassembly code would stomp all over the free list element, which would
cause the destructor to explode when the free list attempted to clean up
all of its elements. This surprisingly did not cause any other problems
until now.
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
This commit was SVN r29593.
The following SVN revision numbers were found above:
r29484 --> open-mpi/ompi@a6ed232a10
r29507 --> open-mpi/ompi@790d269ce8
If we need to use a convertor, go back to stashing that convertor in the
frag and populating segments "on the fly" (in
ompi_btl_usnic_module_progress_sends). Previously we would pack into a
chain of chunk segments at prepare_src time, unnecessarily consuming
additional memory.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
This commit was SVN r29592.
This makes it a little easier to see what's happening with callbacks to
the PML.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
This commit was SVN r29591.
This includes suppressing picky-mode warnings about __VA_ARGS__, which
we know are supported by any compilers we care about.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
This commit was SVN r29590.
Ensure that they never are touched by checking in their destructors.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
Reviewed-by: Reese Faucette <rfaucett@cisco.com>
This commit was SVN r29589.
Let imagine that we have two btls in btl_openib_component_init() both points to the same openib_btl->device and as a result have the same openib_btl->device->endpoints array.
Finalization phase calls twice mca_btl_openib_finalize()->mca_btl_openib_finalize_resources().
mca_btl_openib_finalize_resources() frees endpoint related btl. But the second call of mca_btl_openib_finalize_resources() checks endpoint that is released by previus call.
fixed by Igor, reviewed by miked/vasily
cmr=v1.7.4:reviewer=ompi-gk1.7
This commit was SVN r29563.
This commit moves all the module stats into their own struct so that
the stats only need to appear as a single line in the module_t
definition, and then moves all the logic for reporting the stats into
btl_usnic_stats.c|h.
Further, the stats are now exported as MPI_T_BIND_NO_OBJECT entities
(i.e., not bound to any particular MPI handle), and are marked as
READONLY and CONTINUOUS. They currently all default to verbose level
5 ("Application tuner / detailed", according to
https://svn.open-mpi.org/trac/ompi/wiki/MCAParamLevels).
Most of the statistics are counters, but a small number are high
watermark values. Due to how counters are reported via MPI_T, none of
the counters are exported through MPI_T if the MCA param
btl_usnic_stats_relative=1 (i.e., the module resets the stats back to
zero at a given frequency).
When MPI_T_pvar_handle_alloc() is invoked on any of these pvars, it
will return a count that is equal to the number of active usnic BTL
modules. The values returned for any given pvar (e.g.,
num_total_sends) are an array containing one value for each active
usnic BTL module. The ordering of values in the array is both
consistent across all usnic pvars and stable throughout a single job:
array slot 0 corresponds to module X, array slot 1 corresponds to
module Y, etc.
Mapping which array slot corresponds to which underlying Linux usnic_X
device works as follows:
* The btl_usnic_devices MPI_T state pvar is associated with a
btl_usnic_device MPI_T enum, and be obtained via
MPI_T_pvar_get_info().
* If all usNIC pvars are of length N, the values [0,N) in the
btl_usnic_device enum are associated with strings of the
corresponding underlying Linux device.
For exampe, to look up which Linux device is reported in all usNIC
pvars' array slot 1, look up the int value 1 in the btl_usnic_devices
enum. Its corresponding string value is underlying Linux device name
(e.g., "usnic_1").
cmr=v1.7.4:subject="usnic BTL MPI_T pvars"
This commit was SVN r29545.
r29479.
This fixes some issues reported awhile ago in the openib btl. There
are a couple more unchecked mallocs but they are a bit more difficult
to fix since they are in void functions (btl_openib_endpoint.c).
Refs trac:2401.
cmr=v1.7.4:reviewer=miked
This commit was SVN r29543.
The following SVN revision numbers were found above:
r29479 --> open-mpi/ompi@d6ead2a3a5
The following Trac tickets were found above:
Ticket 2401 --> https://svn.open-mpi.org/trac/ompi/ticket/2401
Due to deallocation ordering (and an entirely missed deallocation), we
were leaking modest amounts of memory inside libusnic_verbs.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29485.
- some free lists simply were not being OBJ_DESTRUCTed, so they never
freed their internal memory
- channel->recv_segs.ctx was being assigned in a way that got clobbered
by ompi_free_list_init_new, so the cleanup code that relied on it
being set never ran
- numerous other ".ctx" assignments were similarly ineffectual and were
not being consumed, so I deleted them
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29484.
This new routine can be called in exceptional situations, either
conditionally in BTL code or from a debugger, to help with debugging in
cases where MSGDEBUG1/2 or stats logging are impractical but more detail
is needed.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29483.
Pull the bulk of the functionality out into a new routine,
ompi_btl_usnic_print_stats, which can be used in other debugging
contexts. This also lets us eliminate the module->final_stats state
tracking.
Reviewed-by: Jeff Squyres <jsquyres@cisco.com>
This commit was SVN r29482.
Prevent frag from being freed out from under us in the case
the PML callback routine calls usnic_free(). We accomplish this
by delaying decrement of sf_bytes_to_ack until after the callback is
performed, since sf_bytes_to_ack == 0 is condition of freeing the frag.
Fixes Cisco bug CSCuj45094.
Authored-by: Reese Faucette <rfaucett@cisco.com>
cmr=v1.7.3
This commit was SVN r29264.
MSGDEBUG2 now means "print a one-liner for all PML calls into BTL, and
also when BTL calls PML with a recv completion (not send completions)"
MSGDEBUG1 means print more internal gory detail
MSGDEBUG is gone, replaced by MSGDEBUG1
In the process also found that PUT_DEST style fragments could
potentially be leaked in usnic_free() since send_fragment tests were
being applied to see if it was eligible to be freed.
This commit was SVN r29185.
changes required to support MPI_Bsend(). Introduces concept of
attaching a buffer to a large segment that the PML can scribble into and
we will send from. The reason we don't use a pinned buffer and send
directly from that is that usnic_verbs does not (yes) support num_sge>1
for regular sends. This means the data gets copied twice, but that is
unavoidable.
changed the logic in handle_large_send to be more sensible
Incorporated David's review comments
This commit was SVN r29184.
Do not assume that the "size" passed to alloc_send() will be the same as
the size of the message the resulting fragment will hold when
usnic_send() is called. This means usnic_send()/usnic_put() can never
trust any pre-computed size values, and are only allowed to look at the
lengths and pointers of the elements in the desc SG list.
This commit was SVN r29183.
- tag needs to be sent in *our* header, not the PML header
- usnic_alloc() should return smaller value if too much data requested
- be careful about callbacks vs removing items from lists
(we need to remove from outr lists *before* the callback)
- improve send callback handling
- add some more MSGDEBUG2 logging and cleanup
This commit was SVN r29181.
The FREE_LIST_*_MT stuff was introduced on the SVN trunk in r28722
(2013-07-04), but so far, has not been merged into the v1.7 branch yet
(2013-09-06). So put it in its own #ifdef, rather than defining it
based on OMPI_MAJOR_VERSION/OMPI_MINOR_VERSION.
This commit was SVN r29148.
The following SVN revision numbers were found above:
r28722 --> open-mpi/ompi@c9e5ab9ed1
The Cisco-maintained v1.6 port of the usnic BTL has diverged from the
upstream trunk and v1.7 branches. This commit adjusts the trunk to more
closely match the v1.6 branch to simplify future merging and
cherry-picking.
The usnic MCA parameters also need work on this side.
Should be included in usnic v1.7.3 roll-up CMR (refs trac:3760)
This commit was SVN r29138.
The following Trac tickets were found above:
Ticket 3760 --> https://svn.open-mpi.org/trac/ompi/ticket/3760
The fix for the HPL SEGV was incorrect because it assumed the
prepare_src() routine was always allowed to return "bytes processed"
less than the requested "bytes to send". It turns out this is only true
if the convertor is what limits the size, we are not allowed to limit
the data sent for our own reasons, else we break login in the upper
layers.
This means we need to learn the number of bytes out of the size
requested the convertor will give us, no matter how big the size is.
Unfortunately, this is a destructive test, and (currently) the only way to
learn that number is to actually have the convertor copy the data out into
buffers.
This change implements this, copying the entire data out into a chain of
send segments which are attached to the large send fragment. Now we can
always return the proper size value to the PML.
Fixes Cisco bug CSCuj08024
Authored-by: Reese Faucette <rfaucett@cisco.com>
Should be included in usnic v1.7.3 roll-up CMR (refs trac:3760)
This commit was SVN r29137.
The following Trac tickets were found above:
Ticket 3760 --> https://svn.open-mpi.org/trac/ompi/ticket/3760
Authored-by: Reese Faucette <rfaucett@cisco.com>
Should be included in usnic v1.7.3 roll-up CMR (refs trac:3760)
This commit was SVN r29136.
The following Trac tickets were found above:
Ticket 3760 --> https://svn.open-mpi.org/trac/ompi/ticket/3760
Should be included in usnic v1.7.3 roll-up CMR (refs trac:3760)
This commit was SVN r29135.
The following Trac tickets were found above:
Ticket 3760 --> https://svn.open-mpi.org/trac/ompi/ticket/3760
Should be included in usnic v1.7.3 roll-up CMR (refs trac:3760)
This commit was SVN r29134.
The following Trac tickets were found above:
Ticket 3760 --> https://svn.open-mpi.org/trac/ompi/ticket/3760
- round segment buffer allocation to cache-line
- split some routines into an inline fast section and a called
slower section
- introduce receive fastpath in component_progress that:
o returns immediately if there is a packet available on priority
queue and fastpath is enabled
o disables fastpath for 1 time after use to provide fairness to
other processing
o defers receive buffer posting
o defers bookeeping for receive until next call
to usnic_component_progress
Authored-by: Reese Faucette <rfaucett@cisco.com>
Should be included in usnic v1.7.3 roll-up CMR (refs trac:3760)
This commit was SVN r29133.
The following Trac tickets were found above:
Ticket 3760 --> https://svn.open-mpi.org/trac/ompi/ticket/3760
Without this, an `--enable-debug` build would hit an assertion in the
list code when run under valgrind with `--malloc-fill=0xff` or any other
case where malloc returned non-zeroed buffers.
Also allow the normal OBJ_ machinery to handle the constructor
invocation ordering for us instead of doing it by hand (which could have
led to future bugs).
Reviewed-by: jsquyres@cisco.com
cmr=v1.7.4
Depends on trunk functionality in r29095 and r29096. Refs trac:3740,#3741.
This commit was SVN r29127.
The following SVN revision numbers were found above:
r29095 --> open-mpi/ompi@d1b5940e97
r29096 --> open-mpi/ompi@a552921171
The following Trac tickets were found above:
Ticket 3740 --> https://svn.open-mpi.org/trac/ompi/ticket/3740
