such, the commit message back to the master SVN repository is fairly
long.
= ORTE Job-Level Output Messages =
Add two new interfaces that should be used for all new code throughout
the ORTE and OMPI layers (we already make the search-and-replace on
the existing ORTE / OMPI layers):
* orte_output(): (and corresponding friends ORTE_OUTPUT,
orte_output_verbose, etc.) This function sends the output directly
to the HNP for processing as part of a job-specific output
channel. It supports all the same outputs as opal_output()
(syslog, file, stdout, stderr), but for stdout/stderr, the output
is sent to the HNP for processing and output. More on this below.
* orte_show_help(): This function is a drop-in-replacement for
opal_show_help(), with two differences in functionality:
1. the rendered text help message output is sent to the HNP for
display (rather than outputting directly into the process' stderr
stream)
1. the HNP detects duplicate help messages and does not display them
(so that you don't see the same error message N times, once from
each of your N MPI processes); instead, it counts "new" instances
of the help message and displays a message every ~5 seconds when
there are new ones ("I got X new copies of the help message...")
opal_show_help and opal_output still exist, but they only output in
the current process. The intent for the new orte_* functions is that
they can apply job-level intelligence to the output. As such, we
recommend that all new ORTE and OMPI code use the new orte_*
functions, not thei opal_* functions.
=== New code ===
For ORTE and OMPI programmers, here's what you need to do differently
in new code:
* Do not include opal/util/show_help.h or opal/util/output.h.
Instead, include orte/util/output.h (this one header file has
declarations for both the orte_output() series of functions and
orte_show_help()).
* Effectively s/opal_output/orte_output/gi throughout your code.
Note that orte_output_open() takes a slightly different argument
list (as a way to pass data to the filtering stream -- see below),
so you if explicitly call opal_output_open(), you'll need to
slightly adapt to the new signature of orte_output_open().
* Literally s/opal_show_help/orte_show_help/. The function signature
is identical.
=== Notes ===
* orte_output'ing to stream 0 will do similar to what
opal_output'ing did, so leaving a hard-coded "0" as the first
argument is safe.
* For systems that do not use ORTE's RML or the HNP, the effect of
orte_output_* and orte_show_help will be identical to their opal
counterparts (the additional information passed to
orte_output_open() will be lost!). Indeed, the orte_* functions
simply become trivial wrappers to their opal_* counterparts. Note
that we have not tested this; the code is simple but it is quite
possible that we mucked something up.
= Filter Framework =
Messages sent view the new orte_* functions described above and
messages output via the IOF on the HNP will now optionally be passed
through a new "filter" framework before being output to
stdout/stderr. The "filter" OPAL MCA framework is intended to allow
preprocessing to messages before they are sent to their final
destinations. The first component that was written in the filter
framework was to create an XML stream, segregating all the messages
into different XML tags, etc. This will allow 3rd party tools to read
the stdout/stderr from the HNP and be able to know exactly what each
text message is (e.g., a help message, another OMPI infrastructure
message, stdout from the user process, stderr from the user process,
etc.).
Filtering is not active by default. Filter components must be
specifically requested, such as:
{{{
$ mpirun --mca filter xml ...
}}}
There can only be one filter component active.
= New MCA Parameters =
The new functionality described above introduces two new MCA
parameters:
* '''orte_base_help_aggregate''': Defaults to 1 (true), meaning that
help messages will be aggregated, as described above. If set to 0,
all help messages will be displayed, even if they are duplicates
(i.e., the original behavior).
* '''orte_base_show_output_recursions''': An MCA parameter to help
debug one of the known issues, described below. It is likely that
this MCA parameter will disappear before v1.3 final.
= Known Issues =
* The XML filter component is not complete. The current output from
this component is preliminary and not real XML. A bit more work
needs to be done to configure.m4 search for an appropriate XML
library/link it in/use it at run time.
* There are possible recursion loops in the orte_output() and
orte_show_help() functions -- e.g., if RML send calls orte_output()
or orte_show_help(). We have some ideas how to fix these, but
figured that it was ok to commit before feature freeze with known
issues. The code currently contains sub-optimal workarounds so
that this will not be a problem, but it would be good to actually
solve the problem rather than have hackish workarounds before v1.3 final.
This commit was SVN r18434.
used at nce (up to one unique collective module per collective function).
Matches r15795:15921 of the tmp/bwb-coll-select branch
This commit was SVN r15924.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r15795
r15921
outstanding requests can be limited using mca parameters.
The implementation passed Intel, IMB-3.2, and mpi_test_suite tests over
TCP and MX up to 128 processes (64 nodes), on both 32-bit and 64-bit machines.
It is not activated by default, but it should be useful for really large
communicator sizes.
This commit was SVN r13720.
- post isends in reverse order of posting irecvs.
if the messages arrive approximately in order, this should
minimize the time spent in matching the requests.
I did not see any performance difference over MX up to 64 nodes, but
the change makes sense and may have some impact when we have (many)
more nodes.
This commit was SVN r13337.
- consistent arguments checking (not allowing to select an algorithm which
is not available)
- consistent way of computing the segcount (number of datatypes by segment).
- small cleanups.
- more informative debugging messages.
This commit was SVN r12545.
size and diplacement of data-type. After this patch all data can contain size_t bytes
and the displacements are defined as ptrdiff_t. All of the files I was able to compile
have been modified to match this requirement.
This commit was SVN r12146.
(1) As pointed out by Torsten after Jeff comment that there are 15 collectives yesterday.. nope.. I have 16 but
miss counted them in my ifdefs (I had two #11s). Replaces with enum...
(2) Added a readonly MCA param for how many backend algorithms are available per collective (used by benchmarker/STS)
This allowed me to remove the tuned query internal functions and replace them with ompi_coll_tuned_forced_max_algorithms[COLL].
(3) I was reading the user forced MCA params for the collectives on each comm create (module init) but I then put the
values into a global set of variables (like ompi_coll_tuned_reduce_forced_algorithm).
To fix this and make the code neater:
(a) The component looks up the MCA param indices on Open if dynamic_rules is set via the
ompi_coll_tuned_COLLECTIVE_intra_check_forced_init () call.
(b) Got rid of the ompi_coll_ompi_coll_tuned_COLLECTIVE_forced_algorithm/segmentsize/etc globals with a struct that
is now cached on the module data hung off the communicator. i.e. done right.
(c) On module init if dynamic rules enabled we call a general getvalues routine (in coll_tuned_forced.c) to get the
CURRENT values using the MCA param indices and then put them on the modules data segment.
A shorter version of getvalues exists for barrier which only needs the algorithm choice
This commit was SVN r9663.
- move files out of toplevel include/ and etc/, moving it into the
sub-projects
- rather than including config headers with <project>/include,
have them as <project>
- require all headers to be included with a project prefix, with
the exception of the config headers ({opal,orte,ompi}_config.h
mpi.h, and mpif.h)
This commit was SVN r8985.
(apparently we've been doing this in opal and orte, but not in ompi
yet). All public symbols begin with "ompi_coll_tuned_" (not
mca_coll_tuned_) except the component struct. Now this component
passes the illegal symbol report with no hits.
This commit was SVN r8589.
Lots of misc fixes: printfs->opal_output, handles fanin/out correctly for forced ops
unused vars, correct calculations on meaning of 'msgsize' for decision functions
(varies depending on algorithm), etc
This commit was SVN r8113.
go through the dynamic decision rule interface.
(forced algorithms are set with MCA params)
fixed some silly verbose output with wrong func name in it etc
updates to fixed dec rules.
This commit was SVN r7940.
started to add static (fixed if) statement based decision rules based on gigE numbers
added mca params so that a user can force a certain algorithm/segment/topo on a per collective basis
(this is not in the fixed call path but only in the dynamic (at com create) call path).
(these params can be used by test suites such as OCC to choice which algorithm they are using).
This commit was SVN r7854.
-added some alltoall calls (pairwise checked ok, bruck testing)
-changes in use of data hung of communicator
-making sendrecv call a true inline function
-more use ompi_ddt routines
This commit was SVN r7337.
