MPI_Comm_idup.
As part of this work I implemented a basic request scheduler in
ompi/comm/comm_request.c. This scheduler might be useful for more
than just communicator requests and could be moved to ompi/request
if there is a demand. Otherwise I will leave it where it is.
Added a non-blocking version of ompi_comm_set to support ompi_comm_idup.
The call makes a recursive call to comm_dup and a non-blocking version
was needed. To simplify the code the blocking version calls the nonblocking
version and waits on the resulting request if one exists.
cmr=v1.7.4:reviewer=jsquyres:ticket=trac:3796
This commit was SVN r29334.
The following Trac tickets were found above:
Ticket 3796 --> https://svn.open-mpi.org/trac/ompi/ticket/3796
arrays.
The MPI 3.0 standard added const to all in buffers in the C bindings. This
commit adds the const keyword and in most cases casts const away. We will
eventually should go through and update the various interfaces (coll, pml,
io, etc) to take the const keyword. The group, comm, win, and datatype
interfaces have been updated with const.
cmr=v1.7.4:ticket=trac:3785:reviewer=jsquyres
This commit was SVN r29266.
The following Trac tickets were found above:
Ticket 3785 --> https://svn.open-mpi.org/trac/ompi/ticket/3785
Blocking versions are simple linear algorithms implemented in coll/basic. Non-
blocking versions are from libnbc 1.1.1. All algorithms have been tested with
simple test cases.
cmr=v1.7.4:reviewer=jsquyres
This commit was SVN r29265.
The intercomm "merge" function can create a linkage between procs that was not reflected anywhere in a modex, and so at least some of the procs in the resulting communicator don't know how to talk to some of the new communicator's peers.
For example, consider the case where:
1. parent job A comm_spawns a process (job B) - these processes exchange modex and can communicate
2. parent job A now comm_spawns another process (job C) - again, these can communicate, but the proc in C knows nothing of B
3. do an intercomm merge across the communicators created by the two comm_spawns. This puts B and C into the same communicator, but they know nothing about how to talk to each other as they were not involved in any exchange of contact info. Hence, collectives on that communicator now fail.
This fix adds an API to the ompi/dpm framework that (a) exchanges the modex info across the procs in the merge to ensure all procs know how to communicate, and (b) calls add_procs to give the btl's a chance to select transports to any new procs.
cmr:v1.7.3:reviewer=jsquyres
This commit was SVN r29166.
The following Trac tickets were found above:
Ticket 2904 --> https://svn.open-mpi.org/trac/ompi/ticket/2904
Working on faster algorithms for tuned that will come at a later time.
cmr=v1.7.3:ticket=trac:2965
This commit was SVN r28952.
The following Trac tickets were found above:
Ticket 2965 --> https://svn.open-mpi.org/trac/ompi/ticket/2965
Add support for MPI_Count type and MPI_COUNT datatype and add the required
MPI-3 functions MPI_Get_elements_x, MPI_Status_set_elements_x,
MPI_Type_get_extent_x, MPI_Type_get_true_extent_x, and MPI_Type_size_x.
This commit adds only the C bindings. Fortran bindins will be added in
another commit. For now the MPI_Count type is define to have the same size
as MPI_Offset. The type is required to be at least as large as MPI_Offset
and MPI_Aint. The type was initially intended to be a ssize_t (if it was
the same size as a long long) but there were issues compiling romio with
that definition (despite the inclusion of stddef.h).
I updated the datatype engine to use size_t instead of uint32_t to support
large datatypes. This will require some review to make sure that 1) the
changes are beneficial, 2) nothing was broken by the change (I doubt
anything was), and 3) there are no performance regressions due to this
change.
Increase the maximum number of predifined datatypes to support MPI_Count
Put common get_elements code to ompi/datatype/ompi_datatype_get_elements.c
Update MPI_Get_count to reflect changes in MPI-3 (return MPI_UNDEFINED when the count is too large for an int)
This commit was SVN r28932.
This patch reshape the way we deal with topologies completely. Where
our topologies were mainly storage components (they were not capable
of creating the new communicator), the new version is built around a
[possibly] common representation (in mca/topo/topo.h), but the functions
to attach and retrieve the topological information are specific to each
component. As a result the ompi_create_cart and ompi_create_graph functions
become useless and have been removed.
In addition to adding the internal infrastructure to manage the topology
information, it updates the MPI interface, and the debuggers support and
provides all Fortran interfaces.
This commit was SVN r28687.
requests. This patch fixes trac:3475.
CMR v1.6, v1.7
This commit was SVN r28431.
The following Trac tickets were found above:
Ticket 3475 --> https://svn.open-mpi.org/trac/ompi/ticket/3475
Notes:
- This commit also eliminates the need for an available components list in use
in several frameworks. None of the code in question was making use of the
priority field of the priority component list item so these extra lists were
removed.
- Cleaned up selection code in several frameworks to sort lists using opal_list_sort.
- Cleans up the ompi/orte-info functions. Expose the functions that construct the
list of params so they can be used elsewhere.
patches for mtl/portals4 from brian
missed a few output variables in openib
This commit was SVN r28241.
ompi_show_help, because opal_show_help is replaced with an
aggregating version when using ORTE, so there's no reason to
directly call orte_show_help.
This commit was SVN r28051.
Not sure what happened here, but the resulting trunk wouldn't even configure. After spending time fixing that problem, I found it wouldn't compile due to multiple syntax errors that had been introduced in both the OPAL and OMPI layer. This raised questions as to the completeness of the work.
Given that the author is departing, I pinged Jeff about it and we agreed to revert this for now. Hopefully, it can either be fixed by the author prior to actual departure, or someone else can pick it up (now that it is in the history) and fix it.
This commit was SVN r27511.
The following SVN revision numbers were found above:
r27508 --> open-mpi/ompi@12c3c743de
r27509 --> open-mpi/ompi@79e4a8ca38
r27510 --> open-mpi/ompi@1ad5ff625a
- fix the Fortran layer to use new macros to convert Fortran-to-C status
- change the C internals to pull out old OMPI_SET_STATUS* macros
Also, change name of "status" argument in topo_test_f.c to "topo_type".
This commit was SVN r27403.
* Ensure the profiling version is linked in
* Ensure that PMPI variants are prototyped in mpi.h
* Ensure weak symbols are set correctly
This commit was SVN r26649.
REDUCE_SCATTER, SCATTERV, and GATHERV. Thanks to the mpi4py community
for reporting the issue.
This commit was SVN r26489.
The following SVN revision numbers were found above:
r26488 --> open-mpi/ompi@42793aa10f
Jonathan Dursi), fix a bug in the parameter verification of
MPI_ALLGATHERV: ensure to use the ''remote'' group size when checking
the recvcounts array.
This commit was SVN r26488.
1. New mpifort wrapper compiler: you can utilize mpif.h, use mpi, and use mpi_f08 through this one wrapper compiler
1. mpif77 and mpif90 still exist, but are sym links to mpifort and may be removed in a future release
1. The mpi module has been re-implemented and is significantly "mo' bettah"
1. The mpi_f08 module offers many, many improvements over mpif.h and the mpi module
This stuff is coming from a VERY long-lived mercurial branch (3 years!); it'll almost certainly take a few SVN commits and a bunch of testing before I get it correctly committed to the SVN trunk.
== More details ==
Craig Rasmussen and I have been working with the MPI-3 Fortran WG and Fortran J3 committees for a long, long time to make a prototype MPI-3 Fortran bindings implementation. We think we're at a stable enough state to bring this stuff back to the trunk, with the goal of including it in OMPI v1.7.
Special thanks go out to everyone who has been incredibly patient and helpful to us in this journey:
* Rolf Rabenseifner/HLRS (mastermind/genius behind the entire MPI-3 Fortran effort)
* The Fortran J3 committee
* Tobias Burnus/gfortran
* Tony !Goetz/Absoft
* Terry !Donte/Oracle
* ...and probably others whom I'm forgetting :-(
There's still opportunities for optimization in the mpi_f08 implementation, but by and large, it is as far along as it can be until Fortran compilers start implementing the new F08 dimension(..) syntax.
Note that gfortran is currently unsupported for the mpi_f08 module and the new mpi module. gfortran users will a) fall back to the same mpi module implementation that is in OMPI v1.5.x, and b) not get the new mpi_f08 module. The gfortran maintainers are actively working hard to add the necessary features to support both the new mpi_f08 module and the new mpi module implementations. This will take some time.
As mentioned above, ompi/mpi/f77 and ompi/mpi/f90 no longer exist. All the fortran bindings implementations have been collated under ompi/mpi/fortran; each implementation has its own subdirectory:
{{{
ompi/mpi/fortran/
base/ - glue code
mpif-h/ - what used to be ompi/mpi/f77
use-mpi-tkr/ - what used to be ompi/mpi/f90
use-mpi-ignore-tkr/ - new mpi module implementation
use-mpi-f08/ - new mpi_f08 module implementation
}}}
There's also a prototype 6-function-MPI implementation under use-mpi-f08-desc that emulates the new F08 dimension(..) syntax that isn't fully available in Fortran compilers yet. We did that to prove it to ourselves that it could be done once the compilers fully support it. This directory/implementation will likely eventually replace the use-mpi-f08 version.
Other things that were done:
* ompi_info grew a few new output fields to describe what level of Fortran support is included
* Existing Fortran examples in examples/ were renamed; new mpi_f08 examples were added
* The old Fortran MPI libraries were renamed:
* libmpi_f77 -> libmpi_mpifh
* libmpi_f90 -> libmpi_usempi
* The configury for Fortran was consolidated and significantly slimmed down. Note that the F77 env variable is now IGNORED for configure; you should only use FC. Example:
{{{
shell$ ./configure CC=icc CXX=icpc FC=ifort ...
}}}
All of this work was done in a Mercurial branch off the SVN trunk, and hosted at Bitbucket. This branch has got to be one of OMPI's longest-running branches. Its first commit was Tue Apr 07 23:01:46 2009 -0400 -- it's over 3 years old! :-) We think we've pulled in all relevant changes from the OMPI trunk (e.g., Fortran implementations of the new MPI-3 MPROBE stuff for mpif.h, use mpi, and use mpi_f08, and the recent Fujitsu Fortran patches).
I anticipate some instability when we bring this stuff into the trunk, simply because it touches a LOT of code in the MPI layer in the OMPI code base. We'll try our best to make it as pain-free as possible, but please bear with us when it is committed.
This commit was SVN r26283.
