Also, since I put some of the macros for these silent/verbose rules up
in the top-level Makefile.man-page-rules file, I renamed it to
Makefile.ompi-rules.
I've had this sitting around for a while; now seems like as good a
time as any to commit it.
This commit was SVN r31271.
The problem arises when a hostfile is used, and the user provides host names without specifying the slots= paramater. In these cases, we assign slots=1, but automatically allow oversubscription since that number isn't confirmed. We then provide a separate parameter by which the user can direct that we assign the number of slots based on the sensed hardware - e.g., by telling us to set the #slots equal to the #cores on each node. However, this has been set to "off" by default.
In order to make this a little less complex for the user, set the default such that we automatically set #slots equal to #cores (or #hwt's if use_hwthreads_as_cpus has been set) only for those cases where the user provides names in a hostfile but does not provide slot information.
Also cleanup some a couple of issues in the mapping/binding system:
* ensure we only override the binding directive if we are oversubscribed *and* overload is not allowed
* ensure that the MPI procs don't attempt to bind themselves if they are launched by an orted as any binding directive (no matter what it was) would have been serviced by the orted on launch
* minor cleanup to the warning message when oversubscribed and binding was requested
cmr=v1.7.5:reviewer=rhc:subject=update mapping/binding system
This commit was SVN r30909.
can't apply its normal precedence rules.
So...print a big "deprecated" warning for the old params and error out if a conflict is detected. I know that isn't what people really wanted, but it's the best we
can do. If only the old style param is given, then process it after the warning.
Extend the current map-by param to add support for ppr and cpus-per-proc, adding the latter to the list of allowed modifiers using "pe=n" for processing elements/proc. Thus, you can map-by socket:pe=2,oversubscribe to map by socket, binding 2 processing elements/process, with oversubscription allowed. Or you can map-by ppr:2:socket:pe=4 to map two processes to every socket in the allocation, binding each process to 4 processing elements.
For those wondering, a processing element is defined as a hwthread if --use-hwthreads-as-cpus is given, or else as a core.
Refs trac:4117
This commit was SVN r30620.
The following Trac tickets were found above:
Ticket 4117 --> https://svn.open-mpi.org/trac/ompi/ticket/4117
specifically delineate that we're referring to the process' rank in
MPI_COMM_WORLD.
Refs trac:4068
This commit was SVN r30181.
The following Trac tickets were found above:
Ticket 4068 --> https://svn.open-mpi.org/trac/ompi/ticket/4068
pkg{data,lib,includedir}, use our own ompi{data,lib,includedir}, which is
always set to {datadir,libdir,includedir}/openmpi. This will keep us from
having help files in prefix/share/open-rte when building without Open MPI,
but in prefix/share/openmpi when building with Open MPI.
This commit was SVN r30140.
Thanks to Tim Miller for reporting the regression from the 1.6 series
cmr=v1.7.4:reviewer=jsquyres:subject=Ensure that comm_spawn'd procs get user-specified forwarded envars
This commit was SVN r30012.
*** THIS RFC INCLUDES A MINOR CHANGE TO THE MPI-RTE INTERFACE ***
Note: during the course of this work, it was necessary to completely separate the MPI and RTE progress engines. There were multiple places in the MPI layer where ORTE_WAIT_FOR_COMPLETION was being used. A new OMPI_WAIT_FOR_COMPLETION macro was created (defined in ompi/mca/rte/rte.h) that simply cycles across opal_progress until the provided flag becomes false. Places where the MPI layer blocked waiting for RTE to complete an event have been modified to use this macro.
***************************************************************************************
I am reissuing this RFC because of the time that has passed since its original release. Since its initial release and review, I have debugged it further to ensure it fully supports tests like loop_spawn. It therefore seems ready for merge back to the trunk. Given its prior review, I have set the timeout for one week.
The code is in https://bitbucket.org/rhc/ompi-oob2
WHAT: Rewrite of ORTE OOB
WHY: Support asynchronous progress and a host of other features
WHEN: Wed, August 21
SYNOPSIS:
The current OOB has served us well, but a number of limitations have been identified over the years. Specifically:
* it is only progressed when called via opal_progress, which can lead to hangs or recursive calls into libevent (which is not supported by that code)
* we've had issues when multiple NICs are available as the code doesn't "shift" messages between transports - thus, all nodes had to be available via the same TCP interface.
* the OOB "unloads" incoming opal_buffer_t objects during the transmission, thus preventing use of OBJ_RETAIN in the code when repeatedly sending the same message to multiple recipients
* there is no failover mechanism across NICs - if the selected NIC (or its attached switch) fails, we are forced to abort
* only one transport (i.e., component) can be "active"
The revised OOB resolves these problems:
* async progress is used for all application processes, with the progress thread blocking in the event library
* each available TCP NIC is supported by its own TCP module. The ability to asynchronously progress each module independently is provided, but not enabled by default (a runtime MCA parameter turns it "on")
* multi-address TCP NICs (e.g., a NIC with both an IPv4 and IPv6 address, or with virtual interfaces) are supported - reachability is determined by comparing the contact info for a peer against all addresses within the range covered by the address/mask pairs for the NIC.
* a message that arrives on one TCP NIC is automatically shifted to whatever NIC that is connected to the next "hop" if that peer cannot be reached by the incoming NIC. If no TCP module will reach the peer, then the OOB attempts to send the message via all other available components - if none can reach the peer, then an "error" is reported back to the RML, which then calls the errmgr for instructions.
* opal_buffer_t now conforms to standard object rules re OBJ_RETAIN as we no longer "unload" the incoming object
* NIC failure is reported to the TCP component, which then tries to resend the message across any other available TCP NIC. If that doesn't work, then the message is given back to the OOB base to try using other components. If all that fails, then the error is reported to the RML, which reports to the errmgr for instructions
* obviously from the above, multiple OOB components (e.g., TCP and UD) can be active in parallel
* the matching code has been moved to the RML (and out of the OOB/TCP component) so it is independent of transport
* routing is done by the individual OOB modules (as opposed to the RML). Thus, both routed and non-routed transports can simultaneously be active
* all blocking send/recv APIs have been removed. Everything operates asynchronously.
KNOWN LIMITATIONS:
* although provision is made for component failover as described above, the code for doing so has not been fully implemented yet. At the moment, if all connections for a given peer fail, the errmgr is notified of a "lost connection", which by default results in termination of the job if it was a lifeline
* the IPv6 code is present and compiles, but is not complete. Since the current IPv6 support in the OOB doesn't work anyway, I don't consider this a blocker
* routing is performed at the individual module level, yet the active routed component is selected on a global basis. We probably should update that to reflect that different transports may need/choose to route in different ways
* obviously, not every error path has been tested nor necessarily covered
* determining abnormal termination is more challenging than in the old code as we now potentially have multiple ways of connecting to a process. Ideally, we would declare "connection failed" when *all* transports can no longer reach the process, but that requires some additional (possibly complex) code. For now, the code replicates the old behavior only somewhat modified - i.e., if a module sees its connection fail, it checks to see if it is a lifeline. If so, it notifies the errmgr that the lifeline is lost - otherwise, it notifies the errmgr that a non-lifeline connection was lost.
* reachability is determined solely on the basis of a shared subnet address/mask - more sophisticated algorithms (e.g., the one used in the tcp btl) are required to handle routing via gateways
* the RML needs to assign sequence numbers to each message on a per-peer basis. The receiving RML will then deliver messages in order, thus preventing out-of-order messaging in the case where messages travel across different transports or a message needs to be redirected/resent due to failure of a NIC
This commit was SVN r29058.
- orte_debugger_init_after_spawn was not being called for debuggers that
use the MPIR_attach_fifo to co-locate debugger daemons.
- MPIR_Breakpoint was not getting called if a debugger reattached. Add
a job state (ORTE_JOB_STATE_DEBUGGER_DETACH) to reset mpir_breakpoint_fired
to false when a debugger detaches to ensure MPIR_Breakpoint is called if
another debugger attaches. Tested with STAT 2.0/launchmon 1.0.
cmr:v1.7
This commit was SVN r28665.
Features:
- Support for an override parameter file (openmpi-mca-param-override.conf).
Variable values in this file can not be overridden by any file or environment
value.
- Support for boolean, unsigned, and unsigned long long variables.
- Support for true/false values.
- Support for enumerations on integer variables.
- Support for MPIT scope, verbosity, and binding.
- Support for command line source.
- Support for setting variable source via the environment using
OMPI_MCA_SOURCE_<var name>=source (either command or file:filename)
- Cleaner API.
- Support for variable groups (equivalent to MPIT categories).
Notes:
- Variables must be created with a backing store (char **, int *, or bool *)
that must live at least as long as the variable.
- Creating a variable with the MCA_BASE_VAR_FLAG_SETTABLE enables the use of
mca_base_var_set_value() to change the value.
- String values are duplicated when the variable is registered. It is up to
the caller to free the original value if necessary. The new value will be
freed by the mca_base_var system and must not be freed by the user.
- Variables with constant scope may not be settable.
- Variable groups (and all associated variables) are deregistered when the
component is closed or the component repository item is freed. This
prevents a segmentation fault from accessing a variable after its component
is unloaded.
- After some discussion we decided we should remove the automatic registration
of component priority variables. Few component actually made use of this
feature.
- The enumerator interface was updated to be general enough to handle
future uses of the interface.
- The code to generate ompi_info output has been moved into the MCA variable
system. See mca_base_var_dump().
opal: update core and components to mca_base_var system
orte: update core and components to mca_base_var system
ompi: update core and components to mca_base_var system
This commit also modifies the rmaps framework. The following variables were
moved from ppr and lama: rmaps_base_pernode, rmaps_base_n_pernode,
rmaps_base_n_persocket. Both lama and ppr create synonyms for these variables.
This commit was SVN r28236.
* Add a little more description of what rankfiles are
* Update that we use logical numbering for socket:core notation
* Mention +nX notation
This commit was SVN r28067.
It appears the problem was not with the command line parser but the rsh plm. I don't know why this problem was not occuring before the command line parser changes but it appears to be resolved now.
This commit was SVN r27527.
The following SVN revision numbers were found above:
r27451 --> open-mpi/ompi@d59034e6ef
r27456 --> open-mpi/ompi@ecdbf34937
For those nodes (and *only* those nodes) where the user does *not* specify a slot count, we will set the number of slots according to their direction: either to the number of cores, numas, sockets, or hwthreads. Otherwise, the slot count is set to 1.
Note that the default behavior remains unchanged: in the absence of any value for #slots, and in the absence of any directive to set #slots, we will set #slots=1.
This commit was SVN r27236.
Remove some stale configure.m4's we no longer need.
Optimize the nidmaps a bit by only sending info that has changed each time, instead of sending a complete copy of everything. Makes no difference for the typical MPI job - only impacts things like staged execution where we are sending multiple (possibly many) launch messages.
This commit was SVN r27165.
r26951. The feeling is that fixing the actual problem of the command
line parser not always identifying when invalid command line options
were specified (i.e., r26953) was a better solution.
This commit was SVN r26979.
The following SVN revision numbers were found above:
r26951 --> open-mpi/ompi@1f8df92c3c
r26953 --> open-mpi/ompi@0b7b3feba9
