r8698), with changes below:
- Split wrapper flags into those required for each of the three projects,
and cleaned up some cruft (including the LIBMPI_EXTRA_*FLAGS) through-
out the build system
- Added opal_init_util and opal_finalize_util to allow init / cleanup
of all the opal code that doesn't require the MCA system
- Create standalone key=value file parser, based on the one that used
to be in the mca param parser, so that it can be shared in multiple
places
- Add wrapper datafiles for opal, orte, and ompi wrappers, and add
wrapper compiler with support for all the old features
This commit was SVN r8699.
The following SVN revisions from the original message are invalid or
inconsistent and therefore were not cross-referenced:
r8690
r8698
determine values like Fortran alignment (which can only be determined by
running a program) when cross-compiling. By providing cache values, the
programs will not be run at all, and life will be good. Also clean up
some macro interfaces so that they are a bit easier to use, at the cost
of horrid internals ;).
This commit was SVN r8684.
- don't fail to configure if threads aren't found, since
we don't have thread support on windows
- rather than setting the asm file name to none in asm-data,
special case windows w/ CL in the ompi_config_asm macros.
Otherwise, there were some warnings during make dist and
configure that didn't need to be there.
This commit was SVN r8502.
- add the right asm format
- add checks for some constants / fields that cygwin
doesn't have in the stacktrace code
- fix for slightly more verbose libtool 2 betas that
have multiple lines for link output
This commit was SVN r8501.
- since we now have three places where we need to add a -l<foo> if
and only if it isn't already in something in LIBS that provides
symbol bar...
This commit was SVN r8370.
ability at this point to roll back and build without libltdl if we thought we
we going to have libltdl (we can configure without libltdl if we know from
the start it won't be there, from --disable-dlopen).
This commit was SVN r8336.
following for the rationale:
http://www.open-mpi.org/community/lists/users/2005/11/0391.php
Note that mpi.h only receives AC_DEFINE's (not AC_SUBST's), so we
still have to AC_DEFINE to get the value in there -- so we AC_DEFINE
something that we give to a typedef.
This commit was SVN r8326.
case of:
sizeof(MPI_Flogical) != sizeof (int)
and
Fortran value of .TRUE. != 1
as is often the case.
- Check in configure the value of .TRUE., the C-type coresponding to
logical and check, that fortran compiler does not do something strange
with arrays of logicals
- Convert all occurrences of logicals in the fortran wrappers, only
in case it is needed.
*Please note* Implementation of MPI_Cart_sub needed special treatment.
- Output these value in ompi_info -a
- Clean up the prototypes_mpi.h to just have a single definition and
thereby deleting the necessity for prototypes_pmpi.h
- configured, compiled and tested with F90-program, which uses
MPI_Cart_create and MPI_Cart_get:
linux ia32, gcc (no testing, as no f90)
linux ia32, gcc --disable-mpi-f77 --disable-mpi-f90 (had a bug there)
linux ia32, icc-8.1
linux opteron, gcc-3.3.5, pgcc, pathccx/pathf90 (tested just
pgi-compiler)
linux em64t, gcc, icc-8.1 (tested just icc)
This commit was SVN r8254.
it doesn't support it -- the compiler will automatically convert the
unsupported type to a type that it *does* support. For example, if
you try to use INTEGER*16 and the compiler doesn't support it, it may
well automatically convert it to INTEGER*8 for you (!). So we have to
check the actual size of the type once we determine that the compiler
doesn't error if we try to use it (i.e,. the compiler *might* support
that type). If the size doesn't match the expected size, then the
compiler doesn't really support it.
The F77 configure code actually handled this properly. The F90 code
did not quite do it right. This patch brings the F90 code up to the
same structure as the F77 code, albiet not m4-ized properly. I also
added a comment to config/f77_check.m4 that explains *why* we do this
extra size check (because no explanation was given).
The impetus for this was that xlf* on OS X 10.3 was not recognizing
that INTEGER*16 was not supported, and mpi-f90-interfaces.h was being
assembled incorrectly. This patch fixes this problem.
There is still one more problem, but waiting for some help from Craig
R on that (function pointers in F90 declarations).
This commit was SVN r8107.
originally suggested by Ralf Wildenhues, to try to speed autogen, configure,
and make (and possibly even make install). Use automake's include directive
to drastically reduce the number of Makefile files (although the number of
Makefile.am files is the same - most are just included in a top-level
Makefile.am). Also use an Automake SUBDIRs feature to eliminate the
dynamic-mca tree, which was no longer really needed. This makes adding
a framework easier (since you don't have to remember the dynamic-mca
tree) and makes building faster (as make doesn't have to recurse through
the dynamic-mca tree)
This commit was SVN r7777.
a random string of characters as part of the version number (the really
soon to happen 1.0lanl release and the 1.1sc2005 release that we've
talked about). So rather than having alpha and beta fields that must
be numeric values, have a general field that can be any alphanumeric
value.
This commit was SVN r7511.
C / C++ tests now use the caching scheme. Only exception is C++ exception
handling code, which is disabled by default, so I'm not too worried about making
that configure faster :)
This commit was SVN r7403.
AM_INIT_AUTOMAKE, instead of the deprecated version.
* Work around dumbness in modern AC_INIT that requires the version
number to be set at autoconf time (instead of at configure time, as
it was before). Set the version number, minus the subversion r number,
at autoconf time. Override the internal variables to include the r
number (if needed) at configure time. Basically, the right thing
should always happen. The only place it might not is the version
reported as part of configure --help will not have an r number.
* Since AM_INIT_AUTOMAKE taks a list of options, no need to specify
them in all the Makefile.am files.
* Addes support for subdir-objects, meaning that object files are put
in the directory containing source files, even if the Makefile.am is
in another directory. This should start making it feasible to
reduce the number of Makefile.am files we have in the tree, which
will greatly reduce the time to run autogen and configure.
This commit was SVN r7211.
add a -I to find the included ltdl.h (vs. a system-installed ltdl.h)
- Clean up kruft in a bunch of Makefile.am's to remove now-unnecessary
AM_CPPFLAGS settings to get static-components.h for each framework
- Move the component_repository API functions out of opal/mca/base/base.h
and into opal/mca/base/mca_base_component_repository.h in order to
decrease unnecessary dependencies (e.g., before this, almost
everything in the tree depended on ltdl.h, which is unnecessary --
only a small number of files really need ltdl.h)
This commit was SVN r7127.
include any optimization flags
- Use these flags to always compile ompi/debuggers/* and orterun so
that parallel debuggers (such as Totalview) can always see the
debugging symbols (see comments in ompi/debuggers/Makefile.am and
orte/tools/orterun/Makefile.am)
- Remove some obsolete LAM-named variables from configure.ac
This commit was SVN r7125.
friendly #defines to be included in mpi.h (even for users), such as
_GNU_SOURCE, which can have some really big consequences on Linux.
Instead, add mpi.h to AC_CONFIG_HEADERS and just include the #defines
we have to have for mpi.h and the C++ bindings.
This commit was SVN r7022.
not to build to not be added to the ALL_COMPONENTS list and therefore
not distributed in a tarball
* add some of the contrib/ stuff to the dist tarball (the stuff to
make binary packages and the "--with-platform" files)
This commit was SVN r6955.
callbacks to be triggered when memory is about to leave the current
process. The system is designed to allow a variety of interfaces,
hopefully including whole-sale replacement of the memory manager,
ld preload tricks, and hooks into the system memory manager. Since
some of these may or may not be available at runtime and we won't know
until runtime, there is a query funtion to look for availability of
such a setup.
* Added ptmalloc2 memory manager replacement code. Not turned on by
default, can be enabled with --with-memory-manager=ptmalloc2.
Only tested on Linux, not even compiled elsewhere. Do not use
on OS X, or you will never see your process again.
* Added AM_CONDITIONAL for threads test to support ptmalloc2's build
system
This commit was SVN r6790.
load a set of arguments to build OMPI. So you can do something like:
./configure --with-platform=redstorm
and automagically have all 10,000 arguments to configure required
for Red Storm magically set
* change all instances of sinclude to m4_include so that autogen
will properly fail if an .m4 file isn't included properly
This commit was SVN r6648.
- Fix up the F90 void * sizeof detection, and ensure that we
AC_MSG_ERROR if we can't support OMPI_MPI_ADDRESS_KIND (highly
unlikely, but...)
This commit was SVN r6639.
- only call sched_yield if it exists
- don't fail out if modex doens't work in ob1
- bunch of fixes for Portals BTL
- add cnos rml component
- add NULL gpr component (should only be used if replica AND proxy
fail to load)
This commit was SVN r6629.
* Add ability to completely disable libltdl (the dlopen code to load
dynamic shared objects) to configure: --disable-dlopen
* Added MCA param (component_disable_dlopen) to disable DSO loading
at runtime
* Made the event library behave in some not-completely-erroneous way
on platforms where it has absolutely no eventops support (ie, no
select, poll, or epoll)
* Disabled orte_wait, opal_few, and opal_daemon_init code on
platforms without fork, waitpid support. All non-init functions
will return OPMI_ERR_NOT_SUPPORTED
* Disable orteprobe tool when fork or pipe aren't supported
This commit was SVN r6490.
Red Storm. Add stub functions to ompi_config_bottom.h when they are
around
* Add protection for a bunch of #include <netinet/in.h>s
* Fix up the Portals BTL so that it compiles on Red Storm and has the
right mojo for initialization on Red Storm
* Add some important comments to ompi_check_package and mvapi configures
* Add support for platforms without getpwuid() (aka, Red Storm).
This commit was SVN r6478.
sockaddr_in - seems to be a good indicator)
* disable util/if code if no inet devices (again, no sockaddr_in)
* add enable/disable flag to disable stacktrace pretty-print code
(defaults to enabled). Seems there's something funky going on with
the preprocessor on Red Storm that was causing problems - this was
the easiest fix
* clean up a bunch of the configure.m4 files to remove bogus comments,
properly comment them, fix the dumb logic for happy/unhappy
* Create a macro for testing both header and library for a package,
since we seem to do this kind of test quite often. Handles the
-I and -L search paths properly (including stripping out /usr and
/usr/local if not needed)
* Converted mvapi components to configure.m4, using the nice new
ompi_check_package macro (above)
This commit was SVN r6454.
frameworks, and components without configure scripts instead of
hard-coded shell variables (for projects and frameworks) and
shell variable building (for components).
* Add 3rd category of component configuration (in addition to configure
scripts and no-configured components): configure.m4 components. These
components can only be built as part of OMPI (like no-configure), but
can provide an m4 file that is run as part of the main configure
script. These macros can set whether the component should be built,
along with just about any other configuration wanted. More care must
be taken compared to configure components, as doing things like setting
variables or calling AC_MSG_ERROR now affects the top-level configure
script (so calling AC_MSG_ERROR if your component can't configure
probably isn't what you want)
* Added support to autogen.sh for the configure.m4-style components,
as well as building up the m4_define lists ompi_mca.m4 now expects
* Updated a number of macros to be more config.cache friendly (both
so that config.cache can be used and so the test can be quickly
run multiple times in the same configrue script):
- ompi_config_asm
- c_weak_symbols
- c_get_alignment
* Added new macros to be shared when configuring components:
- ompi_objc.m4 (this actually provides AC_PROG_OBJC - don't ask...)
- ompi_check_xgrid
- ompi_check_tm
- ompi_check_bproc
* Updated a number of components to use configure.m4 instead of
configure.stub
- btl portals
- io romio
- tm ras and pls
- bjs, lsf_bproc ras and bproc_seed pls
- xgrid ras and pls
- null iof (used by tm)
This commit was SVN r6412.
- After long discussions and ruminations on how we run components in
LAM/MPI, made the decision that, by default, all components included
in Open MPI will use the version number of their parent project
(i.e., OMPI or ORTE). They are certaint free to use a different
number, but this simplification makes the common cases easy:
- components are only released when the parent project is released
- it is easy (trivial?) to distinguish which version component goes
with with version of the parent project
- removed all autogen/configure code for templating the version .h
file in components
- made all ORTE components use ORTE_*_VERSION for version numbers
- made all OMPI components use OMPI_*_VERSION for version numbers
- removed all VERSION files from components
- configure now displays OPAL, ORTE, and OMPI version numbers
- ditto for ompi_info
- right now, faking it -- OPAL and ORTE and OMPI will always have the
same version number (i.e., they all come from the same top-level
VERSION file). But this paves the way for the Great Configure
Reorganization, where, among other things, each project will have
its own version number.
So all in all, we went from a boatload of version numbers to
[effectively] three. That's pretty good. :-)
This commit was SVN r6344.
so that I can next rename all the files under mca/btl using "svn mv" which is
not possible until after the initial "svn mv bmi btl" is checked in.
This commit was SVN r6220.
* If we are on solaris, don't use the system qsort(), as it appears to be
broken in 64 bit mode on Solaris 8 (there are bugs about this in
SunSolve). Instead, use ompi_qsort(), which is taken from FreeBSD.
A #define in ompi_config_bottom.h makes this invisible to most of the
OMPI source tree.
* Fix memory badness in ompi_progress_register where we were reallocing the
array to be number of elements long instead of number of elements *
sizeof(element). Found while using bcheck to track down our problems in
64 bit on big endian machines.
* The debugging output code in session_dir.c could pass NULL as a value for a %s,
which will turn into "(null)" automagically on glibc, but causes segfaults for
older libcs (like those on Solaris). Check for this case in session_dir.c and
don't pass NULL as a %s value into ompi_output().
* Fix missing header file in convertor.c
This commit was SVN r6186.
I'm contributing patches for configure.ac and f90_check_type.m4.
The problem was that f90_check_type returned an exit code
and not all compilers actually do this. The fix tries to compile the
type and fails if it can't. The problem is that some compilers will
happily return a default kind if the particular kind is not supported.
So the real test is whether the size of the datatype is as expected.
This commit was SVN r6101.
